Adds modules that aren't deprecated. These include dependencies and
configuration files.

Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>

Adds some missing config files.

Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>

This adds a mechanism that disables all modules by default and then
enables only the modules needed for the packages selected, resulting in
less build time.

Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>

This adds support for the following calendars:

- CalDAV
- MS Exchange Web Service
- MS Exchange
- iCalendar

Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>

Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>

With the recently updated libsrtp2 asterisk 13 compiles fine, so it
doesn't need to be forcefully prevented anymore from linking against it.

Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>

The previously conceived hack - to make the buildbots actually build
this package during the target phase - does not work. This patch removes
the hack. This includes removing the lines from the asterisk Makefiles
that tar up the asterisk headers.

The upside of removing the hack is that the package name can be reverted
to what it was before, so it can be found in the same place like all the
other asterisk modules, i.e. below its asterisk version.

Another upside is that the Makefile does not pretend to solve the
problem anymore. Issue #193 is still open for the same. Maybe some day
somebody can figure out how to resolve the problem properly.

Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>

Signed-off-by: Jiri Slachta <jiri@slachta.eu>

Signed-off-by: Jiri Slachta <jiri@slachta.eu>

Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>

Store asterisk headers in $(DL_DIR) so chan-lantiq can access them
during the target specific build phase. The headers are tarred up for
"mips_24kc" only because that is currently the only used arch for all
chan-lantiq targets.

Store one archive for each combination of asterisk version (e.g. 13) and
branch (using $(VERSION_NUMBER)). The latter makes sure that a release
build doesn't overwrite the header archive of a master snapshot build
and vice vera.

Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>

Fixes: AST-2017-008

Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>

Currently chan-lantiq doesn't build on the build bots and users end up
having to build it themselves. The reason for this was explained by
Mathias Kresin here:
http://lists.infradead.org/pipermail/lede-dev/2017-September/008886.html

.

To fix this put chan-lantiq into its own package and set
PKG_FLAGS:=nonshared. The new package uses variants already, so it is
easily extendable in the future.

Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>

Because asterisk13-chan-lantiq is target specific package,
it needs PKG_FLAGS variable set to nonshared.

Signed-off-by: Jiri Slachta <jiri@slachta.eu>

Fixes AST-2017-005, AST-2017-006 and AST-2017-007.

Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>

Add new module. Iconv is available in the toolchain, so it doesn't cost
anything. Don't add it when uclibc is used, because there an external
libiconv would be needed.

Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>

Only a cosmetic change.

Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>

libedit now includes a pkgconfig file, meaning asterisk can detect it.
So use the system libedit instead having asterisk include an internal
copy.

Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

- Add missing modules to curl and odbc packages. This fixes issue #181.
- Add back pbx-lua, which apparently was dropped earlier.
- Revision bump.

Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>

- Don't add extra TARGET_LDFLAGS for asterisk13-pbx-lua. It is not
  needed anymore (apart from that the module isn't available currently,
  see next commit).
- Stop setting -Wl,-rpath-link in LDFLAGS. There seems to be no point to
  do that (anymore).
- Stop calling specific make targets like version.h; make handles the
  build properly without it.
- Use the default compile routine instead of the custom one.
- Add AST_FORTIFY_SOURCE to MAKE_FLAGS (seen in Debian rules file,
  prevents asterisk's build system to mess with OpenWrt/LEDE flags).

Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>

- Remove some unneeded parentheses.
- Remove $(SITE_VARS) as it is not used.
- Remove --without-curl and --with-uuid=... from configure arguments as
  they've been removed from configure.

Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>

- Set data dir to /usr/share/asterisk and use default locations for
  everything else.
- This is more in line with FHS and fixes issue #38. Database files are
  now written to tmpfs (/var is mounted there). This prevents the
  rootfs from filling up. It also prevents the flash to degrade during
  constant database rewriting.
- As the data dir changes, so does the location of the sound files. This
  commit also takes care of that.

Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>

Remove two modules from pjsip. Upstream removed res_pjsip_log_forwarder
and moved res_pjsip_multihomed to res_pjsip.

Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>

- The configuration file protection for modules does not work when there
  is more than one configuration file. Currently conffiles is populated
  with a space separated list. But the items need to be separated by
  newlines. With spaces, only the first item gets added to conffiles. The
  remaining items are dropped and not protected. Fix this by replacing
  spaces with newlines. Revision bump because this could lead to
  overwriting files unintentionally.
- Remove a duplicate '/etc/asterisk/modules.conf' from
  Package/asterisk13/conffiles.
- Remove '/etc/asterisk/rtp.conf' from Package/asterisk13/conffiles
  because the file is installed and protected by res-rtp-asterisk.
- Add missing stasis.conf and pjsip_wizard.conf.

Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>

- add some pjsip modules that were missing.
- sort pjsip modules alphabetically.
- add a patch from ASTERISK-26518 to fix the unresolved symbol issue.
  The patch is also included in Debian. The patch fixes issue #77 (the
  problem was also mentioned in #88).

Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>

- Make "--disable-floating-point" depend on SOFT_FLOAT
- Remove "--disable-ilbc-coder" as configure no longer recognizes it.
- Align args with the ones used by Asterisk (for their bundled pjproject);
  this includes adding "--disable-resample".
- With libresample removed remove the dep from asterisk13 accordingly.
- Note: the disabled items are _not_ used by Asterisk anyway.
- Drop speex dep as pjproject does not link against it the way it is
  configured.

Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>

Add missing config file for res_pjproject module.

Signed-off-by: Jiri Slachta <jiri@slachta.eu>

Bump PKG_RELEASE due to changes in commit ec6991c0

Signed-off-by: Jiri Slachta <jiri@slachta.eu>

In issue #173 a segmentation fault occuring during a simple SIP call was
reported. Compiling with LOW_MEMORY disabled the reproducible segfault
disappeared.

This commits adds a switch for LOW_MEMORY. Default is off. If anybody
wants to debug the segfault s/he can enable it.

The segfault was reported for Asterisk 11. Disable LOW_MEMORY on
Asterisk 13 anyway, better safe than sorry.

Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>

- add XMPP and motif modules
- remove missing pjproject dependencies and fix them

Signed-off-by: Jiri Slachta <jiri@slachta.eu>

Asterisk 13 looks for libsrtp2. Unfortunately it also looks for a header
which libsrtp2 does not make public:

res_srtp.c:44:33: fatal error: srtp2/crypto_types.h: No such file or directory
compilation terminated.

This causes the asterisk build to fail. Fix this by disabling libsrtp2
detection in Asterisk 13.

Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>

dahdi-linux fails to build on aarch64. Disable chan-dahdi for this arch
accordingly, so asterisk can still be built.

Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>

LOW_MEMORY can't be enabled by defining it in ASTCFLAGS. This can be
verified in the headers Asterisk installs: LOW_MEMORY actually is not
defined (it would be if LOW_MEMORY was enabled).

LOW_MEMORY can be enabled successfully with menuselect. This commit
makes menuselect usable and calls it to enable LOW_MEMORY.

This commit also disables BUILD_NATIVE with menuselect. So even if
configure detects that -march=native is available, it won't be used.
This means the configure.ac patch that was added previously can be
dropped.

Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>

menuselect often fails on the buildbots:

menuselect/menuselect: error while loading shared libraries: libxml2.so.2: cannot open shared object file: No such file or directory

This doesn't happen on all builds. The assumption is that on the
particular buildbot where there is no error the buildbots own libxml2.so
is usable (it exists and the version is suitable).

To fix this make the linker add an rpath to the menuselect utility,
pointing to the hostpkg lib dir.

Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>

The variable prevents the ifneqs from working on the buildbots. $(SDK)
is set there, so the ifneqs that test for empty will always be true.

libpq for instance doesn't build on aarch64. So the asterisk pgsql
package has a dependency on @!aarch64. An ifneq is used to disable libpq
detection by the configure script, to prevent the build to fail. But
because of $(SDK) being set the ifneq is always true, so libpq detection
is enabled, causing the build to always fail.

There are only two other packages in the tree that actually use the
$(SDK) variable, so it's fair to assume it's not needed for the asterisk
packages and can just be dropped.

Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>

For ARC libpq doesn't build, so don't depend on it.

Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>

- Include host-build.mk, otherwise $HOST_CONFIGURE_ARGS will be empty.
- Remove --with-ncurses=PATH as the PATH is wrong. The ncurses host
  package does not install anything but 'tic'.
- Use $HOSTCC to compile menuselect. This has the added bonus of using
  ccache (if selected).
- Run configure with an unset $CONFIG_SITE so that it doesn't pick a
  cross-compile site-script, e.g. for mips.
- Drop '-lxml2' from $LDFLAGS as the menuselect Makefile will add it
  anyway.
- Move the variables in front of 'make' as they're not arguments.

Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>

The missing backslashes prevented 'make' from picking up
ASTCFLAGS/ASTLDFLAGS.

Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>

- Version bump to 13.17.0
- Remove makeopts.embed_rules as the target got removed.
- Refresh patches.
- $(STAGING_DIR)/host doesn't work anymore resulting in libxml2 host
  headers not being found. Replace with $(STAGING_DIR_HOSTPGK).
- Prevent Asterisk from adding -march=native when cross-compiling (patch
  for configure.ac).

Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>