- Bump version also in the config file
- Move logread to /sbin location instead of /usr/sbin
Because package logd in OpenWrt's ubox Makefile uses /sbin folder and LuCI has
the same path hardcoded in
modules/luci-base/root/usr/share/rpcd/acl.d/luci-base.json and using
different location results that LuCI is not able to load log data as it
is not found.

Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
(cherry picked from commit fe165eeb)

[Openwrt 19.07] Shorewall: Bump to 5.2.3.7

[19.07] mariadb: add dependency on libaio for arc as well

Signed-off-by: W. van den Akker <wvdakker@wilsoft.nl>

Signed-off-by: W. van den Akker <wvdakker@wilsoft.nl>

Signed-off-by: W. van den Akker <wvdakker@wilsoft.nl>

Signed-off-by: W. van den Akker <wvdakker@wilsoft.nl>

Signed-off-by: W. van den Akker <wvdakker@wilsoft.nl>

Now that libaio compiles on arc targets we need to add the dependency to
libaio on these targets as well.

resolves #9298

Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>

Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>

Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>

phantap: add to 19.07

https://github.com/openwrt/packages/pull/11320#issuecomment-594032207



luv, libwebsockets, ttyd, netdata are build OK.

Signed-off-by: Hirokazu MORIKAWA <morikw2@gmail.com>

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
(cherry picked from commit ed965cf1)

Create an anonymous inode in /tmp using O_TMPFILE and attempt to link the
file in place using linkat(). Only fall back to the old file copy when
linking the tempfile fails.

Avoids double memory use if both the temporary upload file and the
destination file are located in /tmp.

Ref: https://github.com/openwrt/luci/issues/3654


Signed-off-by: Jo-Philipp Wich <jo@mein.io>
(cherry picked from commit 4f4a7e95)

Allocate dynamic buffer memory for decoding post data and allow post
requsts up to 128KB compared to the previos 1KB limit.

Also support downloading /proc and /sys files by falling back to
chunked transfer encoding when the file size cannot be determined.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
(cherry picked from commit 39087eba)

Irqbalance: backport to 19.07

Added support for reload_config

This service does not need to start so early (even
before the netwrok is up). Start it after
the device is mostly up and operational.

Compile-tested on: ipq806x
Runtime-tested on: ipq806x

Signed-off-by: Marc Benoit <marcb62185@gmail.com>
(cherry picked from commit b6078559)

Added the ability to change sampling interval
and provide a list of IRQ's to ignore
via /etc/config/irqbalance

Signed-off-by: Marc Benoit <marcb62185@gmail.com>
(cherry picked from commit b7a99b23)

Upgraded from 1.2.0 to 1.6.0 to pick up
all the latest fixes and improvements

irqbalance made glib2 mandatory since 1.3.0, but is
using very little of it. glib2 linked statically
to minimize the impact.

1.2.0 size: 33,619
1.6.0 size: 99,539

~# irqbalance --version
	irqbalance version 1.6.0

~# ldd /usr/sbin/irqbalance
	/lib/ld-musl-armhf.so.1 (0xb6f5f000)
	libgcc_s.so.1 => /lib/libgcc_s.so.1 (0xb6f43000)
	libc.so => /lib/ld-musl-armhf.so.1 (0xb6f5f000)

~# opkg info irqbalance
	Package: irqbalance
	Version: 1.6.0-6
	Depends: libc
	Status: install user installed
	Architecture: arm_cortex-a7_neon-vfpv4
	Installed-Time: 1582839249

Compile-tested: ipq806x/R7800 & ipq40xx/GL-B1300
Run-tested:     ipq806x/R7800 & ipq40xx/GL-B1300

Signed-off-by: Marc Benoit <marcb62185@gmail.com>
(cherry picked from commit bdcb872a)

Signed-off-by: Diana Dragusin <diana.dragusin@nccgroup.com>

[OpenWrt 19.07] libaio: Update to 0.3.112

Replace inactive maintainer with myself.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
(cherry picked from commit 7cd204e9)
Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
[compile tested on powerpc_8540]

Full changelog: https://mosquitto.org/blog/2020/02/version-1-6-9-released/



Nothing of particular relevant to OpenWrt, just general fixes.

Signed-off-by: Karl Palsson <karlp@etactica.com>

Added the ability to enable/disable via a config file;
the default is enabled for backwards compatibility.

This is an additional service, so running it the
same priority as dnsmasq, etc does not make sense.

Added USE_PROCD=1

"done" starts at "START=95", so this should start earlier

Added STOP=10 to stop syncthing early

Compile-tested on: ipq806x, ipq40xx
Runtime-tested on: ipq806x, ipq40xx

Signed-off-by: Marc Benoit <marcb62185@gmail.com>
(cherry picked from commit 6f687746)

syncthing: backport to 19.07

Signed-off-by: Paul Spooren <mail@aparcar.org>
(cherry picked from commit 7c1d6571)
Tested-By: Marc Benoit <marcb62185@gmail.com> [19.07: R7800/GL-B1300]

Signed-off-by: Paul Spooren <mail@aparcar.org>
(cherry picked from commit 373d3b24)
Tested-By: Marc Benoit <marcb62185@gmail.com> [19.07: R7800/GL-B1300]

Syntax now matches preferred upstream style.

Signed-off-by: Karl Palsson <karlp@tweak.net.au>

Patch from upstream: https://github.com/pagekite/libpagekite/commit/7b4587818564aa667f868249e9a8f1dc1d095fd3



Signed-off-by: Karl Palsson <karlp@tweak.net.au>

pings the front ends less aggressively, reducing cpu usage on the host.

Signed-off-by: Karl Palsson <karlp@tweak.net.au>

Fixes: #11174

Signed-off-by: Nikos Mavrogiannopoulos <n.mavrogiannopoulos@gmail.com>

Signed-off-by: Nikos Mavrogiannopoulos <n.mavrogiannopoulos@gmail.com>

This fixes:
  - CVE-2020-7062
  - CVE-2020-7063

Signed-off-by: Michael Heimpold <mhei@heimpold.de>

Fixes openwrt/packages#10270

Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
(cherry picked from commit 0412c20f)

Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
Ref: https://github.com/openwrt/packages/issues/11418
(cherry picked from commit 620ba386)

zip has 12 year old source code that would require work to make
the binary actually work.

> root@router1:/# zip
> zip error: Not supported (uzoff_t not same size as zoff_t)

As the binary does not work, lets remove the package to
avoid confusion for the end-users.

Reference to #10985 and #11089 as well as
https://github.com/openwrt/openwrt/commit/ad8c2d6099a7da5192ee6e2c52a8303642271



Adapted from: c1201a99

(note: The package was renamed in master from zip to infozip
a few weeks ago due to buildbot's relutance to compile zip in
master and 19.07 ever since host zip was added as a build tool.)

Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>