drivers: usb: host: Add BRCM xHCI driver

Base driver for Broadcom xHCI controllers

Signed-off-by: Bharat Kumar Reddy Gooty <bharat.gooty@broadcom.com>
Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com>
Signed-off-by: Vladimir Olovyannikov <vladimir.olovyannikov@broadcom.com>

drivers/usb/host/Kconfig

@@ -88,6 +88,14 @@ config USB_XHCI_FSL
 	depends on !SPL_NO_USB
 	help
 	  Enables support for the on-chip xHCI controller on NXP Layerscape SoCs.
+
+config USB_XHCI_BRCM
+	bool "Broadcom USB3 Host XHCI controller"
+	depends on DM_USB
+	help
+	  USB controller based on the Broadcom USB3 IP Core.
+	  Supports USB2/3 functionality.
+
 endif # USB_XHCI_HCD
 
 config USB_EHCI_HCD

drivers/usb/host/Makefile

@@ -44,6 +44,7 @@ obj-$(CONFIG_USB_EHCI_RMOBILE) += ehci-rmobile.o
 obj-$(CONFIG_USB_EHCI_ZYNQ) += ehci-zynq.o
 
 # xhci
+obj-$(CONFIG_USB_XHCI_BRCM) += xhci-brcm.o
 obj-$(CONFIG_USB_XHCI_HCD) += xhci.o xhci-mem.o xhci-ring.o
 obj-$(CONFIG_USB_XHCI_DWC3) += xhci-dwc3.o
 obj-$(CONFIG_USB_XHCI_DWC3_OF_SIMPLE) += dwc3-of-simple.o

drivers/usb/host/xhci-brcm.c

+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019 Broadcom.
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <fdtdec.h>
+#include <usb.h>
+#include <asm/io.h>
+#include <usb/xhci.h>
+
+#define DRD2U3H_XHC_REGS_AXIWRA	0xC08
+#define DRD2U3H_XHC_REGS_AXIRDA	0xC0C
+
+#define USBAXI_CACHE		0xF
+#define USBAXI_PROT		0x8
+#define USBAXI_SA_MASK		0x1FF
+#define USBAXI_UA_MASK		(0x1FF << 16)
+#define USBAXI_SA_VAL		((USBAXI_CACHE << 4) | USBAXI_PROT)
+#define USBAXI_UA_VAL		(USBAXI_SA_VAL << 16)
+#define USBAXI_SA_UA_MASK	(USBAXI_UA_MASK | USBAXI_SA_MASK)
+#define USBAXI_SA_UA_VAL	(USBAXI_UA_VAL | USBAXI_SA_VAL)
+
+struct brcm_xhci_platdata {
+	unsigned int arcache;
+	unsigned int awcache;
+	void __iomem *hc_base;
+};
+
+static int xhci_brcm_probe(struct udevice *dev)
+{
+	struct brcm_xhci_platdata *plat = dev_get_platdata(dev);
+	struct xhci_hcor *hcor;
+	struct xhci_hccr *hcd;
+	int len, ret = 0;
+
+	if (!plat) {
+		dev_err(dev, "Can't get xHCI Plat data\n");
+		return -ENOMEM;
+	}
+
+	hcd = dev_read_addr_ptr(dev);
+	if (!hcd) {
+		dev_err(dev, "Can't get the xHCI register base address\n");
+		return -ENXIO;
+	}
+
+	plat->hc_base = hcd;
+	len = HC_LENGTH(xhci_readl(&hcd->cr_capbase));
+	hcor = (struct xhci_hcor *)(plat->hc_base + len);
+
+	/* Save the default values of AXI read and write attributes */
+	plat->awcache = readl(plat->hc_base + DRD2U3H_XHC_REGS_AXIWRA);
+	plat->arcache = readl(plat->hc_base + DRD2U3H_XHC_REGS_AXIRDA);
+
+	/* Enable AXI write attributes */
+	clrsetbits_le32(plat->hc_base + DRD2U3H_XHC_REGS_AXIWRA,
+			USBAXI_SA_UA_MASK, USBAXI_SA_UA_VAL);
+
+	/* Enable AXI read attributes */
+	clrsetbits_le32(plat->hc_base + DRD2U3H_XHC_REGS_AXIRDA,
+			USBAXI_SA_UA_MASK, USBAXI_SA_UA_VAL);
+
+	ret = xhci_register(dev, hcd, hcor);
+	if (ret)
+		dev_err(dev, "Failed to register xHCI\n");
+
+	return ret;
+}
+
+static int xhci_brcm_deregister(struct udevice *dev)
+{
+	struct brcm_xhci_platdata *plat = dev_get_platdata(dev);
+
+	/* Restore the default values for AXI read and write attributes */
+	writel(plat->awcache, plat->hc_base + DRD2U3H_XHC_REGS_AXIWRA);
+	writel(plat->arcache, plat->hc_base + DRD2U3H_XHC_REGS_AXIRDA);
+
+	return xhci_deregister(dev);
+}
+
+static const struct udevice_id xhci_brcm_ids[] = {
+	{ .compatible = "brcm,generic-xhci" },
+	{ }
+};
+
+U_BOOT_DRIVER(usb_xhci) = {
+	.name				= "xhci_brcm",
+	.id				= UCLASS_USB,
+	.probe				= xhci_brcm_probe,
+	.remove				= xhci_brcm_deregister,
+	.ops				= &xhci_usb_ops,
+	.of_match			= xhci_brcm_ids,
+	.platdata_auto_alloc_size	= sizeof(struct brcm_xhci_platdata),
+	.priv_auto_alloc_size		= sizeof(struct xhci_ctrl),
+	.flags				= DM_FLAG_ALLOC_PRIV_DMA,
+};