kernel: bump 5.10 to 5.10.132

All patches automatically rebased.

The following patch was replaced by a similar version upstream:
 bcm27xx/patches-5.10/950-0036-tty-amba-pl011-Add-un-throttle-support.patch

Signed-off-by: John Audia <therealgraysky@proton.me>
(cherry picked from commit 7d3c0928)

include/kernel-5.10

-LINUX_VERSION-5.10 = .131
-LINUX_KERNEL_HASH-5.10.131 = 8bc441442c16c330a7148fe3cca9edcd98bc0fc9f68304633c7eb641770d21ce
+LINUX_VERSION-5.10 = .132
+LINUX_KERNEL_HASH-5.10.132 = 7d05a931eee01dea64fc73849e275ff14664ff98813f95f40588f04fdf1cfa2a

target/linux/bcm27xx/patches-5.10/950-0031-amba_pl011-Don-t-use-DT-aliases-for-numbering.patch

@@ -14,7 +14,7 @@ use the same logic.
 
 --- a/drivers/tty/serial/amba-pl011.c
 +++ b/drivers/tty/serial/amba-pl011.c
-@@ -2578,7 +2578,12 @@ static int pl011_setup_port(struct devic
+@@ -2597,7 +2597,12 @@ static int pl011_setup_port(struct devic
  	if (IS_ERR(base))
  		return PTR_ERR(base);
  

target/linux/bcm27xx/patches-5.10/950-0032-amba_pl011-Round-input-clock-up.patch

@@ -26,7 +26,7 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.org>
 
 --- a/drivers/tty/serial/amba-pl011.c
 +++ b/drivers/tty/serial/amba-pl011.c
-@@ -1642,6 +1642,23 @@ static void pl011_put_poll_char(struct u
+@@ -1651,6 +1651,23 @@ static void pl011_put_poll_char(struct u
  
  #endif /* CONFIG_CONSOLE_POLL */
  
@@ -50,7 +50,7 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.org>
  static int pl011_hwinit(struct uart_port *port)
  {
  	struct uart_amba_port *uap =
-@@ -1658,7 +1675,7 @@ static int pl011_hwinit(struct uart_port
+@@ -1667,7 +1684,7 @@ static int pl011_hwinit(struct uart_port
  	if (retval)
  		return retval;
  
@@ -59,7 +59,7 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.org>
  
  	/* Clear pending error and receive interrupts */
  	pl011_write(UART011_OEIS | UART011_BEIS | UART011_PEIS |
-@@ -2292,7 +2309,7 @@ static int pl011_console_setup(struct co
+@@ -2311,7 +2328,7 @@ static int pl011_console_setup(struct co
  			plat->init();
  	}
  
@@ -68,7 +68,7 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.org>
  
  	if (uap->vendor->fixed_options) {
  		baud = uap->fixed_baud;
-@@ -2509,6 +2526,7 @@ static struct uart_driver amba_reg = {
+@@ -2528,6 +2545,7 @@ static struct uart_driver amba_reg = {
  	.cons			= AMBA_CONSOLE,
  };
  
@@ -76,7 +76,7 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.org>
  static int pl011_probe_dt_alias(int index, struct device *dev)
  {
  	struct device_node *np;
-@@ -2540,6 +2558,7 @@ static int pl011_probe_dt_alias(int inde
+@@ -2559,6 +2577,7 @@ static int pl011_probe_dt_alias(int inde
  
  	return ret;
  }

target/linux/bcm27xx/patches-5.10/950-0033-amba_pl011-Insert-mb-for-correct-FIFO-handling.patch

@@ -17,7 +17,7 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.org>
 
 --- a/drivers/tty/serial/amba-pl011.c
 +++ b/drivers/tty/serial/amba-pl011.c
-@@ -1377,6 +1377,7 @@ static bool pl011_tx_char(struct uart_am
+@@ -1386,6 +1386,7 @@ static bool pl011_tx_char(struct uart_am
  		return false; /* unable to transmit character */
  
  	pl011_write(c, uap, REG_DR);

target/linux/bcm27xx/patches-5.10/950-0034-amba_pl011-Add-cts-event-workaround-DT-property.patch

@@ -36,7 +36,7 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.org>
    - reg
 --- a/drivers/tty/serial/amba-pl011.c
 +++ b/drivers/tty/serial/amba-pl011.c
-@@ -2665,6 +2665,11 @@ static int pl011_probe(struct amba_devic
+@@ -2684,6 +2684,11 @@ static int pl011_probe(struct amba_devic
  	if (IS_ERR(uap->clk))
  		return PTR_ERR(uap->clk);
  

target/linux/bcm27xx/patches-5.10/950-0035-tty-amba-pl011-Make-TX-optimisation-conditional.patch

@@ -58,7 +58,7 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.org>
  	spin_unlock(&uap->port.lock);
  	dev_vdbg(uap->port.dev,
  		 "Took %d chars from DMA buffer and %d chars from the FIFO\n",
-@@ -1341,6 +1344,7 @@ __acquires(&uap->port.lock)
+@@ -1350,6 +1353,7 @@ __acquires(&uap->port.lock)
  {
  	pl011_fifo_to_tty(uap);
  
@@ -66,7 +66,7 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.org>
  	spin_unlock(&uap->port.lock);
  	tty_flip_buffer_push(&uap->port.state->port);
  	/*
-@@ -1474,6 +1478,7 @@ static irqreturn_t pl011_int(int irq, vo
+@@ -1483,6 +1487,7 @@ static irqreturn_t pl011_int(int irq, vo
  	int handled = 0;
  
  	spin_lock_irqsave(&uap->port.lock, flags);
@@ -74,7 +74,7 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.org>
  	status = pl011_read(uap, REG_RIS) & uap->im;
  	if (status) {
  		do {
-@@ -1493,7 +1498,7 @@ static irqreturn_t pl011_int(int irq, vo
+@@ -1502,7 +1507,7 @@ static irqreturn_t pl011_int(int irq, vo
  				      UART011_CTSMIS|UART011_RIMIS))
  				pl011_modem_status(uap);
  			if (status & UART011_TXIS)

target/linux/bcm27xx/patches-5.10/950-0036-tty-amba-pl011-Add-un-throttle-support.patch

-From 3cec61f1b19a6f589f8b2aef97977e1c38eb7b70 Mon Sep 17 00:00:00 2001
-From: Phil Elwell <phil@raspberrypi.org>
-Date: Fri, 24 Jan 2020 11:38:28 +0000
-Subject: [PATCH] tty: amba-pl011: Add un/throttle support
-
-The PL011 driver lacks throttle and unthrottle methods. As a result,
-sending more data to the Pi than it can immediately sink while CRTSCTS
-is enabled causes a NULL pointer to be followed.
-
-Add a throttle handler that disables the RX interrupts, and an
-unthrottle handler that reenables them.
-
-Signed-off-by: Phil Elwell <phil@raspberrypi.org>
----
- drivers/tty/serial/amba-pl011.c | 28 ++++++++++++++++++++++++++++
- 1 file changed, 28 insertions(+)
-
---- a/drivers/tty/serial/amba-pl011.c
-+++ b/drivers/tty/serial/amba-pl011.c
-@@ -1317,6 +1317,32 @@ static void pl011_start_tx(struct uart_p
- 		pl011_start_tx_pio(uap);
- }
- 
-+static void pl011_throttle(struct uart_port *port)
-+{
-+	struct uart_amba_port *uap =
-+	    container_of(port, struct uart_amba_port, port);
-+	unsigned long flags;
-+
-+	spin_lock_irqsave(&uap->port.lock, flags);
-+	uap->im &= ~(UART011_RTIM | UART011_RXIM);
-+	pl011_write(uap->im, uap, REG_IMSC);
-+	spin_unlock_irqrestore(&uap->port.lock, flags);
-+}
-+
-+static void pl011_unthrottle(struct uart_port *port)
-+{
-+	struct uart_amba_port *uap =
-+	    container_of(port, struct uart_amba_port, port);
-+	unsigned long flags;
-+
-+	spin_lock_irqsave(&uap->port.lock, flags);
-+	uap->im |= UART011_RTIM;
-+	if (!pl011_dma_rx_running(uap))
-+	    uap->im |= UART011_RXIM;
-+	pl011_write(uap->im, uap, REG_IMSC);
-+	spin_unlock_irqrestore(&uap->port.lock, flags);
-+}
-+
- static void pl011_stop_rx(struct uart_port *port)
- {
- 	struct uart_amba_port *uap =
-@@ -2139,6 +2165,8 @@ static const struct uart_ops amba_pl011_
- 	.stop_tx	= pl011_stop_tx,
- 	.start_tx	= pl011_start_tx,
- 	.stop_rx	= pl011_stop_rx,
-+	.throttle	= pl011_throttle,
-+	.unthrottle	= pl011_unthrottle,
- 	.enable_ms	= pl011_enable_ms,
- 	.break_ctl	= pl011_break_ctl,
- 	.startup	= pl011_startup,

target/linux/bcm27xx/patches-5.10/950-0037-tty-amba-pl011-Avoid-rare-write-when-full-error.patch

@@ -29,7 +29,7 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.org>
 
 --- a/drivers/tty/serial/amba-pl011.c
 +++ b/drivers/tty/serial/amba-pl011.c
-@@ -1438,6 +1438,10 @@ static bool pl011_tx_chars(struct uart_a
+@@ -1421,6 +1421,10 @@ static bool pl011_tx_chars(struct uart_a
  		if (likely(from_irq) && count-- == 0)
  			break;
  

target/linux/bcm27xx/patches-5.10/950-0639-cgroup-Disable-cgroup-memory-by-default.patch

@@ -17,7 +17,7 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.org>
 
 --- a/kernel/cgroup/cgroup.c
 +++ b/kernel/cgroup/cgroup.c
-@@ -5735,6 +5735,9 @@ int __init cgroup_init_early(void)
+@@ -5744,6 +5744,9 @@ int __init cgroup_init_early(void)
  	return 0;
  }
  
@@ -27,7 +27,7 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.org>
  /**
   * cgroup_init - cgroup initialization
   *
-@@ -5773,6 +5776,12 @@ int __init cgroup_init(void)
+@@ -5782,6 +5785,12 @@ int __init cgroup_init(void)
  
  	mutex_unlock(&cgroup_mutex);
  
@@ -40,7 +40,7 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.org>
  	for_each_subsys(ss, ssid) {
  		if (ss->early_init) {
  			struct cgroup_subsys_state *css =
-@@ -6311,6 +6320,10 @@ static int __init cgroup_disable(char *s
+@@ -6320,6 +6329,10 @@ static int __init cgroup_disable(char *s
  			    strcmp(token, ss->legacy_name))
  				continue;
  
@@ -51,7 +51,7 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.org>
  			static_branch_disable(cgroup_subsys_enabled_key[i]);
  			pr_info("Disabling %s control group subsystem\n",
  				ss->name);
-@@ -6320,6 +6333,31 @@ static int __init cgroup_disable(char *s
+@@ -6329,6 +6342,31 @@ static int __init cgroup_disable(char *s
  }
  __setup("cgroup_disable=", cgroup_disable);
  

target/linux/generic/backport-5.10/732-net-next-1-of-net-pass-the-dst-buffer-to-of_get_mac_address.patch

@@ -1162,7 +1162,7 @@ Signed-off-by: David S. Miller <davem@davemloft.net>
  
 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac-dwc-qos-eth.c
 +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-dwc-qos-eth.c
-@@ -444,7 +444,7 @@ static int dwc_eth_dwmac_probe(struct pl
+@@ -445,7 +445,7 @@ static int dwc_eth_dwmac_probe(struct pl
  	if (IS_ERR(stmmac_res.addr))
  		return PTR_ERR(stmmac_res.addr);
  

target/linux/tegra/patches-5.10/100-serial8250-on-tegra-hsuart-recover-from-spurious-interrupts-due-to-tegra2-silicon-bug.patch

@@ -36,7 +36,7 @@ David
 
 --- a/drivers/tty/serial/8250/8250_core.c
 +++ b/drivers/tty/serial/8250/8250_core.c
-@@ -133,6 +133,38 @@ static irqreturn_t serial8250_interrupt(
+@@ -134,6 +134,38 @@ static irqreturn_t serial8250_interrupt(
  
  		if (l == i->head && pass_counter++ > PASS_LIMIT)
  			break;