Create Asterisk-14: Update CHANGES and UPGRADE files

Change-Id: I35b5f6657670cfa8985796fa1e1fe86ad299efdc

CHANGES

@@ -8,6 +8,10 @@
 ===
 ==============================================================================
 
+------------------------------------------------------------------------------
+--- Functionality changes from Asterisk 14 to Asterisk 15 --------------------
+------------------------------------------------------------------------------
+
 ------------------------------------------------------------------------------
 --- Functionality changes from Asterisk 13 to Asterisk 14 --------------------
 ------------------------------------------------------------------------------

UPGRADE-14.txt

+===========================================================
+===
+=== Information for upgrading between Asterisk versions
+===
+=== These files document all the changes that MUST be taken
+=== into account when upgrading between the Asterisk
+=== versions listed below. These changes may require that
+=== you modify your configuration files, dialplan or (in
+=== some cases) source code if you have your own Asterisk
+=== modules or patches. These files also include advance
+=== notice of any functionality that has been marked as
+=== 'deprecated' and may be removed in a future release,
+=== along with the suggested replacement functionality.
+===
+=== UPGRADE-1.2.txt -- Upgrade info for 1.0 to 1.2
+=== UPGRADE-1.4.txt -- Upgrade info for 1.2 to 1.4
+=== UPGRADE-1.6.txt -- Upgrade info for 1.4 to 1.6
+=== UPGRADE-1.8.txt -- Upgrade info for 1.6 to 1.8
+=== UPGRADE-10.txt  -- Upgrade info for 1.8 to 10
+=== UPGRADE-11.txt  -- Upgrade info for 10 to 11
+=== UPGRADE-12.txt  -- Upgrade info for 11 to 12
+=== UPGRADE-13.txt  -- Upgrade info for 12 to 13
+===========================================================
+
+ARI:
+ - The policy for when to send "Dial" events has changed. Previously, "Dial"
+   events were sent on the calling channel's topic. However, starting in Asterisk
+   14, if there is no calling channel on which to send the event, the event is
+   instead sent on the called channel's topic. Note that for the ARI channels
+   resource's dial operation, this means that the "Dial" events will always be
+   sent on the called channel's topic.
+
+Channel Drivers:
+
+chan_dahdi:
+ - For users using the FXO port (FXS signaling) distinctive ring detection
+   feature, you will need to adjust the dringX count values.  The count
+   values now only record ring end events instead of any DAHDI event.  A
+   ring-ring-ring pattern would exceed the pattern limits and stop
+   Caller-ID detection.
+
+chan_sip:
+ - The SIP dial string has been extended past the [!dnid] option by another
+   exclamation mark: [!dnid[!fromuri].  An exclamation mark in the To-URI
+   will now mean changes to the From-URI.
+
+Core:
+ - The REF_DEBUG compiler flag is now used to enable refdebug by default.
+   The setting can be overridden in asterisk.conf by setting refdebug in
+   the options category.  No recompile is required to enable/disable it.
+
+ - Modified processing of command-line options to first parse only what
+   is necessary to read asterisk.conf. Once asterisk.conf is fully loaded,
+   the remaining options are processed.  The -X option now applies to
+   asterisk.conf only.  To enable #exec for other config files you must
+   set execincludes=yes in asterisk.conf.  Any other option set on the
+   command-line will now override the equivalent setting from asterisk.conf.
+
+AMI:
+ - The 'ModuleCheck' Action's Version key will no longer show the module
+   version. The value will always be blank.
+
+CLI:
+ - The 'core show file version' command has been removed. When Asterisk
+   moved to Git, the source control version support was removed. As a
+   result, the CLi command was no longer useful and was removed as well.
+
+Logging:
+ - The first callid created is now 1 instead of 0.  The value 0
+   is now reserved to represent a lack of callid.
+
+AMI:
+ - The Command action now sends the output from the CLI command as a series
+   of Output headers for each line instead of as a block of text with the
+   --END COMMAND-- delimiter to match the output from other actions.
+
+   Commands that fail to execute (no such command, invalid syntax etc.) now
+   return an Error response instead of Success.
+
+app_amd:
+ - The 'maximum_number_of_words' configuration option and parameter to the AMD
+   application previously did not match the documented functionality + variable
+   name.  In Asterisk 13, a value of '3' would mean that if '3' words were detected,
+   the result would be detection as a 'MACHINE'.  As of this version, the value
+   reflects the maximum words that if EXCEEDED (rather than reached), would
+   result in detection as a machine.  This means that you should update this
+   value to be one higher than your previos value, if your previous value
+   was working well for you.
+
+===========================================================
+===========================================================

UPGRADE.txt

@@ -20,72 +20,5 @@
 === UPGRADE-11.txt  -- Upgrade info for 10 to 11
 === UPGRADE-12.txt  -- Upgrade info for 11 to 12
 === UPGRADE-13.txt  -- Upgrade info for 12 to 13
-===========================================================
-
-ARI:
- - The policy for when to send "Dial" events has changed. Previously, "Dial"
-   events were sent on the calling channel's topic. However, starting in Asterisk
-   14, if there is no calling channel on which to send the event, the event is
-   instead sent on the called channel's topic. Note that for the ARI channels
-   resource's dial operation, this means that the "Dial" events will always be
-   sent on the called channel's topic.
-
-Channel Drivers:
-
-chan_dahdi:
- - For users using the FXO port (FXS signaling) distinctive ring detection
-   feature, you will need to adjust the dringX count values.  The count
-   values now only record ring end events instead of any DAHDI event.  A
-   ring-ring-ring pattern would exceed the pattern limits and stop
-   Caller-ID detection.
-
-chan_sip:
- - The SIP dial string has been extended past the [!dnid] option by another
-   exclamation mark: [!dnid[!fromuri].  An exclamation mark in the To-URI
-   will now mean changes to the From-URI.
-
-Core:
- - The REF_DEBUG compiler flag is now used to enable refdebug by default.
-   The setting can be overridden in asterisk.conf by setting refdebug in
-   the options category.  No recompile is required to enable/disable it.
-
- - Modified processing of command-line options to first parse only what
-   is necessary to read asterisk.conf. Once asterisk.conf is fully loaded,
-   the remaining options are processed.  The -X option now applies to
-   asterisk.conf only.  To enable #exec for other config files you must
-   set execincludes=yes in asterisk.conf.  Any other option set on the
-   command-line will now override the equivalent setting from asterisk.conf.
-
-AMI:
- - The 'ModuleCheck' Action's Version key will no longer show the module
-   version. The value will always be blank.
-
-CLI:
- - The 'core show file version' command has been removed. When Asterisk
-   moved to Git, the source control version support was removed. As a
-   result, the CLi command was no longer useful and was removed as well.
-
-Logging:
- - The first callid created is now 1 instead of 0.  The value 0
-   is now reserved to represent a lack of callid.
-
-AMI:
- - The Command action now sends the output from the CLI command as a series
-   of Output headers for each line instead of as a block of text with the
-   --END COMMAND-- delimiter to match the output from other actions.
-
-   Commands that fail to execute (no such command, invalid syntax etc.) now
-   return an Error response instead of Success.
-
-app_amd:
- - The 'maximum_number_of_words' configuration option and parameter to the AMD
-   application previously did not match the documented functionality + variable
-   name.  In Asterisk 13, a value of '3' would mean that if '3' words were detected,
-   the result would be detection as a 'MACHINE'.  As of this version, the value
-   reflects the maximum words that if EXCEEDED (rather than reached), would
-   result in detection as a machine.  This means that you should update this
-   value to be one higher than your previos value, if your previous value
-   was working well for you.
-
-===========================================================
+=== UPGRADE-14.txt  -- Upgrade info for 13 to 14
 ===========================================================