Allow passing 'noisy' to configure's --enable-dev-mode argument to turn on verbose builds.

(closes issue #15607)
Reported by: mvanbaak
Patches:
      20090730_issue15607.patch uploaded by seanbright (license 71)
Tested by: seanbright


git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@209623 65c4cc65-6c06-0410-ace0-fbb531ad65f3

configure

 #! /bin/sh
-# From configure.ac Revision: 204919 .
+# From configure.ac Revision: 205214 .
 # Guess values for system-dependent variables and create Makefiles.
 # Generated by GNU Autoconf 2.61 for asterisk 1.6.
 #
@@ -722,6 +722,7 @@ acx_pthread_config
 PTHREAD_CC
 PTHREAD_LIBS
 PTHREAD_CFLAGS
+NOISY_BUILD
 AST_DEVMODE
 ALSA_LIB
 ALSA_INCLUDE
@@ -8114,6 +8115,10 @@ if test "${enable_dev_mode+set}" = set; then
   enableval=$enable_dev_mode; case "${enableval}" in
 	      y|ye|yes) AST_DEVMODE=yes ;;
 	      n|no)  AST_DEVMODE=no ;;
+	      noisy)
+	      AST_DEVMODE=yes
+	      NOISY_BUILD=yes
+	      ;;
 	      *) { { echo "$as_me:$LINENO: error: bad value ${enableval} for --enable-dev-mode" >&5
 echo "$as_me: error: bad value ${enableval} for --enable-dev-mode" >&2;}
    { (exit 1); exit 1; }; }  ;;
@@ -8122,6 +8127,7 @@ fi
+
 # AST_EXT_LIB_SETUP is used to tell configure to handle variables for
 # various packages.
 # $1 is the prefix for the variables in makeopts and autoconfig.h
@@ -57073,6 +57079,7 @@ acx_pthread_config!$acx_pthread_config$ac_delim
 PTHREAD_CC!$PTHREAD_CC$ac_delim
 PTHREAD_LIBS!$PTHREAD_LIBS$ac_delim
 PTHREAD_CFLAGS!$PTHREAD_CFLAGS$ac_delim
+NOISY_BUILD!$NOISY_BUILD$ac_delim
 AST_DEVMODE!$AST_DEVMODE$ac_delim
 ALSA_LIB!$ALSA_LIB$ac_delim
 ALSA_INCLUDE!$ALSA_INCLUDE$ac_delim
@@ -57163,7 +57170,6 @@ JACK_INCLUDE!$JACK_INCLUDE$ac_delim
 JACK_DIR!$JACK_DIR$ac_delim
 PBX_JACK!$PBX_JACK$ac_delim
 LDAP_LIB!$LDAP_LIB$ac_delim
-LDAP_INCLUDE!$LDAP_INCLUDE$ac_delim
 _ACEOF
   if test `sed -n "s/.*$ac_delim\$/X/p" conf$$subs.sed | grep -c X` = 97; then
@@ -57205,6 +57211,7 @@ _ACEOF
 ac_delim='%!_!# '
 for ac_last_try in false false false false false :; do
   cat >conf$$subs.sed <<_ACEOF
+LDAP_INCLUDE!$LDAP_INCLUDE$ac_delim
 LDAP_DIR!$LDAP_DIR$ac_delim
 PBX_LDAP!$PBX_LDAP$ac_delim
 LIBXML2_LIB!$LIBXML2_LIB$ac_delim
@@ -57301,7 +57308,6 @@ OPENH323_DIR!$OPENH323_DIR$ac_delim
 PBX_OPENH323!$PBX_OPENH323$ac_delim
 RADIUS_LIB!$RADIUS_LIB$ac_delim
 RADIUS_INCLUDE!$RADIUS_INCLUDE$ac_delim
-RADIUS_DIR!$RADIUS_DIR$ac_delim
 _ACEOF
   if test `sed -n "s/.*$ac_delim\$/X/p" conf$$subs.sed | grep -c X` = 97; then
@@ -57343,6 +57349,7 @@ _ACEOF
 ac_delim='%!_!# '
 for ac_last_try in false false false false false :; do
   cat >conf$$subs.sed <<_ACEOF
+RADIUS_DIR!$RADIUS_DIR$ac_delim
 PBX_RADIUS!$PBX_RADIUS$ac_delim
 SDL_LIB!$SDL_LIB$ac_delim
 SDL_INCLUDE!$SDL_INCLUDE$ac_delim
@@ -57439,7 +57446,6 @@ GC_CFLAGS!$GC_CFLAGS$ac_delim
 GC_LDFLAGS!$GC_LDFLAGS$ac_delim
 AST_DECLARATION_AFTER_STATEMENT!$AST_DECLARATION_AFTER_STATEMENT$ac_delim
 AST_FORTIFY_SOURCE!$AST_FORTIFY_SOURCE$ac_delim
-AST_NO_STRICT_OVERFLOW!$AST_NO_STRICT_OVERFLOW$ac_delim
 _ACEOF
   if test `sed -n "s/.*$ac_delim\$/X/p" conf$$subs.sed | grep -c X` = 97; then
@@ -57481,6 +57487,7 @@ _ACEOF
 ac_delim='%!_!# '
 for ac_last_try in false false false false false :; do
   cat >conf$$subs.sed <<_ACEOF
+AST_NO_STRICT_OVERFLOW!$AST_NO_STRICT_OVERFLOW$ac_delim
 AST_SHADOW_WARNINGS!$AST_SHADOW_WARNINGS$ac_delim
 PBX_GLOB_NOMAGIC!$PBX_GLOB_NOMAGIC$ac_delim
 PBX_GLOB_BRACE!$PBX_GLOB_BRACE$ac_delim
@@ -57533,7 +57540,7 @@ PBX_SYSLOG!$PBX_SYSLOG$ac_delim
 LTLIBOBJS!$LTLIBOBJS$ac_delim
 _ACEOF
-  if test `sed -n "s/.*$ac_delim\$/X/p" conf$$subs.sed | grep -c X` = 50; then
+  if test `sed -n "s/.*$ac_delim\$/X/p" conf$$subs.sed | grep -c X` = 51; then
     break
   elif $ac_last_try; then
     { { echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5

configure.ac

@@ -214,8 +214,13 @@ AC_ARG_ENABLE([dev-mode],
 	[case "${enableval}" in
 	      y|ye|yes) AST_DEVMODE=yes ;;
 	      n|no)  AST_DEVMODE=no ;;
+	      noisy)
+	      AST_DEVMODE=yes
+	      NOISY_BUILD=yes
+	      ;;
 	      *) AC_MSG_ERROR(bad value ${enableval} for --enable-dev-mode)  ;;
 	esac])
+AC_SUBST(NOISY_BUILD)
 AC_SUBST(AST_DEVMODE)
 
 # AST_EXT_LIB_SETUP is used to tell configure to handle variables for

makeopts.in

@@ -66,6 +66,7 @@ sharedstatedir = @sharedstatedir@
 sysconfdir = @sysconfdir@
 
 AST_DEVMODE=@AST_DEVMODE@
+NOISY_BUILD=@NOISY_BUILD@
 
 AST_DECLARATION_AFTER_STATEMENT=@AST_DECLARATION_AFTER_STATEMENT@
 AST_NO_STRICT_OVERFLOW=@AST_NO_STRICT_OVERFLOW@