Some telco switches occasionally ignore ISDN RESTART requests.  The fix
for ASTERISK-19608 added an escape clause for B channels in the restarting
state if the telco ignores a RESTART request.  If the telco fails to
acknowledge the RESTART then Asterisk will assume the telco acknowledged
the RESTART on the second call attempt requesting the B channel by the
telco.  The escape clause is good for dealing with RESTART requests in
general but it does cause the next call for the restarting B channel to be
rejected if the telco insists the call must go on that B channel.

chan_dahdi doesn't really need to issue a RESTART request in response to
receiving a cause 44 (Requested channel not available) code.  Sending the
RESTART in such a situation is not required (nor prohibited) by the
standards.  I think chan_dahdi does this for historical reasons to deal
with buggy peers to get channels unstuck in a similar fashion as the
chan_dahdi.conf resetinterval option.

* Add the chan_dahdi.conf force_restart_unavailable_chans compatability
option that when disabled will prevent chan_dahdi from trying to RESTART
the channel in response to a cause 44 code.

ASTERISK-25034 #close
Reported by: Richard Mudgett

Change-Id: Ib8b17a438799920f4a2038826ff99a1884042f65

The patch in 0b6410c4 did correctly fix a memory leak of the DTLS
structures in the RTP engine. However, when a 'core reload' is issued, a
double free of the memory pointed to by the char *'s in the DTLS
configuration struct can occur, as ast_rtp_dtls_cfg_free does not set
the pointers to NULL when they are freed.

This patch sets those pointers to NULL, preventing a second call to
ast_rtp_dtls_cfg_free from corrupting memory.

ASTERISK-25022

Change-Id: I820471e6070a37e3c26f760118c86770e12f6115

A previous set of patches (see: ASTERISK-22790 & ASTERISK-23231) made it so
a v.27 modem was not allowed to have a minimum transmission rate of 2400 bits
per second. This reverts all or some of those patches since according to the
v.27ter standard a rate of 2400 bits per second is also supported.

One of the original patches also added 9600 bits per second support for v.27.
This patch also removes that since v.27ter only supports 2400/4800 bits per
second.

Also, since Asterisk specifically supports v.27ter the enum was renamed to
better reflect this.

ASTERISK-24955 #close
Reported by: Matt Jordan

Change-Id: I4b9dfb6bf7eff08463ab47ee1a74224f27cae733

This function allows code to run ao2_ref against the real
object associated with a weakproxy.  It is useful when
all of the following conditions are true:
* You have a pointer to weakproxy.
* You do not have or need a pointer to the real object.
* You need to ensure the real object exists and is not
  destroyed during a process.

In this case it's wasteful to store a pointer to the real
object just for the sake of releasing it later.

Change-Id: I38a319b83314de75be74207a8771aab269bcca46

Odd behaviors have been observed during outbound registrations. The most
common problem witnessed has been one where a request with
authentication credentials cannot be created after receiving a 401
response. Other behaviors include apparently processing an incorrect SIP
response.

Inspecting the code led to an apparent issue with regards to how we
handle transactions in outbound registration code. When a response to a
REGISTER arrives, we save a pointer to the transaction and then push a
task onto the registration serializer. Between the time that we save the
pointer and push the task, it's possible for the transaction to be
destroyed due to a timeout. It's also possible for the address to be
reused by the transaction layer for a new transaction.

To allow for authentication of a REGISTER request to be authenticated
after the transaction has timed out, we now hold a reference to the
original REGISTER request instead of the transaction. The function for
creating a request with authentication has been altered to take the
original request instead of the transaction where the original request
was sent.

ASTERISK-25020
Reported by Mark Michelson

Change-Id: I756c19ab05ada5d0503175db9676acf87c686d0a

Change-Id: Ic8322f04e37842848ad72cf2871bd0378f67c4ac

Merge "chan_pjsip: Creating Channel Causes Asterisk to Crash When Duplicate AOR             Sections Exist in pjsip.conf"

* changes:
  res_pjsip: Remove incorrect MODULEINFO from presence_xml.c.
  Git Migration: Create doc/rest-api when needed.

ARI modules that are generated by 'make ari-stubs' are all dependent on
res_ari_model.  Additionally some of the same modules depend on one or more
res_stasis_* modules.

ASTERISK-25027 #close
Reported by: Corey Farrell

Change-Id: I8e07fe7e81fedacb87232f2b6f8b5f47927b4153

Remove incorrect MODULEINFO block and unneeded header includes
from presence_xml.c.

ASTERISK-25027
Reported by: Corey Farrell

Change-Id: I977c609ab9d1fe05373027c4138900f6985990eb

Create the directory './doc/rest-api' at the start of 'make ari-stubs'
to prevent an error when documentation is generated.  The directory is
also added to git ignores.

ASTERISK-25027
Reported by: Corey Farrell

Change-Id: Iaccc7f0138501c23aa78feaca2f3cce9e68cbc1b

* Add AST_DEVMODE to BUILDOPTS
* Use BUILDOPTS to generate AST_BUILDOPT_SUM.
* Remove loop that defined AST_MODULE_*

These changes ensure that only ABI effecting options are considered for
AST_BUILDOPT_SUM.  This also reduces unneeded full system rebuilds caused
by enabling or disabling one module that another is dependent on.

ASTERISK-25028 #close
Reported by: Corey Farrell

Change-Id: I2c516d93df9f6aaa09ae079a8168c887a6ff93a2

This switches files used to generate other sources to use the new
ASTERISK_REGISTER_FILE macro.

ASTERISK-25026 #close
Reported by: Corey Farrell

Change-Id: Ieb2537b83421cad07c8955e5f90c405ccf079740

Flags are 64 bits.  Without LLU suffix the value of 1<<31 is negative.
Although it doesn't have an effect on the current implementation, it will
be problem if more flags are added.

Change-Id: Ic290c81cfbbbf062872392d99d3322932cc49487

            Sections Exist in pjsip.conf

This patch modifies the current loading strategy of the pjsip configuration. If
duplicate sections (e.g. sections containing the same [id/type]) are defined in
[pjsip.conf], the loader will consider the configuration for the given type as
invalid when the duplicate section is encountered. The entire configuration
(including what was previously loaded) for the duplicate [id/type] sections
will be rejected and destroyed, an error message is logged and the load
processing for the given stops.

ASTERISK-24996
Reported By: Ashley Sanders

Change-Id: I35090ca4cd40f1f34881dfe701a329145c347aef

Change-Id: I51179e2a83937423676da522b766f1126de4059e

When problems occur regarding outbound registrations, it currently
is difficult to debug. Most off-nominal paths had warning messages,
but sometimes we want to know what's going on before hitting the
off-nominal path. This patch adds lots of debugging output that
should give a clearer picture of what is happening with regards
to outbound registrations.

ASTERISK-25020
Reported by Mark Michelson

Change-Id: I577bde7860be0a6c872b5bcb4d5047340bf45d45

ao2 ref leak in res_rtp_asterisk.c when a DTLS policy is created.
The resources are linked into a table, but the original alloc refs
are never released. ast_strdup leak in rtp_engine.c. If
ast_rtp_dtls_cfg_copy() is called twice on the same destination struct,
a pointer to an alloc'd string is overwritten before the string is free'd.

ASTERISK-25022
Reported by: one47

Change-Id: I62a8ceb8679709f6c3769136dc6aa9a68202ff9b

Change-Id: I3866a20019b1a3a2f10fe36640053929330b0fcb

Change-Id: I534ea0f22759e3633585dfa9b145b4a284efe67f

* The REF_DEBUG compiler flag no longer has any effect on code that uses
  Astobj2.  It is used to determine if reference debugging is enabled by
  default.  Reference debugging can be enabled or disabled in asterisk.conf.
* Caller information is provided in logger errors for ao2 bad magic numbers.
* Optimizes AO2 by merging internal functions with the public counterpart.
  This was possible now that we no longer require a dual ABI.

ASTERISK-24974 #close
Reported by: Corey Farrell

Change-Id: Icf3552721fe999365ba8a8cf00a965aa6b897cc1

Permanent contacts that hadn't been qualified yet were missing
their contact_status entries causing SEGVs when running CLI
commands.

This patch makes sure that contact_statuses are created for
both dynamic and permanent contacts when they are created.
It also adds checks in the CLI code to make sure there's a
contact_status, just in case.

ASTERISK-25018 #close
Reported-by: Ivan Poddubny
Tested-by: Ivan Poddubny
Tested-by: George Joseph

Change-Id: I3cc13e5cedcafb24c400368b515b02d7fb81e029

Add new column to INSERT new columns added in cdr 1.8 version. The columns are:
 * peeraccount
 * linkedid
 * sequence
This feature is configurable in cdr_odbc.conf using a new configuration
option, 'newcdrcolumns'.

ASTERISK-24976 #close

Change-Id: Ibe0c7540a88305c6012786f438a0813ad8b19127

A typo in commit f8e21a1a resulted in a compilation error in
chan_skinny. This patch fixes the typo.

ASTERISK-24917

Change-Id: Id7f4ad1fe948eb2408622e80c27936ce4516c33c