PJSIP assumes that these header names are not allocated, and does not
clone the name strings when reusing headers.

Block unload of res_pjsip_diversion until shutdown to ensure static
memory stays valid.

ASTERISK-28312 #close

Change-Id: Ibd6ea55ec4a604bbd43ac07f8d0b54da2c39b8b9

This file was added to the Subversion repository on 2007-03-15 by
Russell Bryant, a Digium employee at the time.

ASTERISK-24173 #close

Change-Id: Ie866fa9d31d550467613d362b35b03c031ee594d

Rather than calling ast_odbc_find_table() in the prepare callback, call
it beforehand and pass it in to the callback to avoid the need for a
second connection.

ASTERISK-28166 #close

Change-Id: I6f8a0b9990d636fd6bc1a92ed70f7050d2436202

apply_negotiated_sdp_stream was returning a "1" when no joint
capabilities were found on an outgoing call instead of a "-1".
This indicated to res_pjsip_session that the handler DID handle
the sdp when in fact it didn't.  Without the appropriate setup,
a subsequent media frame coming in would have an invalid stream_num
and cause a seg fault when the stream was attempted to be retrieved.

apply_negotiated_sdp_stream now returns the correct "-1" and any
media is now discarded before it reaches the core stream processing.

ASTERISK-28260
Reported by: Sotiris Ganouris

Change-Id: Ia095cb16b4862f2f6ad6d2d2a77453fa2542371f

This reverts commit d524ad52.

Reason for revert: This causes Contact and Via headers to have the wrong
transport address.

ASTERISK-28309 #close

Change-Id: Ibba4d6176f68e39279fcd9a545f81d56e747bed8

If both send_registrations and send_auth are both set to yes,
outbound_auth/username must be set or we crash.

ASTERISK-27992 #close

Change-Id: I6418d56de1ae53f80393b314c2584048fbf7f11d

The recent upgrade of Gerrit to 2.16 elimiated referencing a
repository in a way the jenkinsfiles were relying on so
the URL references were changed to a more consistent and supported
format.

Change-Id: I2e8e3f213b9a96bb1b27665eca4a9a24bc49820e
(cherry picked from commit 5ce08457)

This module allows presence subscriptions to voicemail boxes.  This
allows common BLF keys to act as voicemail waiting indicators.

ASTERISK-28301

Change-Id: I62a246c24f3d7d432e33e22d7a4a57c15c292fdd

Delivery timeval in the smoother object will fall behind while a DTMF is
being generated.  This can eventually lead to invalid rtp timestamps.
To prevent this from happening the smoother needs to be reset after every
DTMF to keep the timing up to date.

ASTERISK-28303 #close

Change-Id: Iaba3f7b428ebd72a4caa90e13b829ab4f088310f

Including line breaks (<br>, <br/>, <br />) in certain parts of the rest-api
json definition (e.g. summary, notes) displays them correctly in swagger.
However, when the field gets converted to the wiki format those breaks get
escaped and show up in the text as the actual string literal "<br>" etc...

This patch makes it so when converting to the wiki format it replaces all line
break values (<br>, etc...) with line feeds ('\n').

Change-Id: Ie1c9faa0d1c5d622804cc0a21ce769095b08aa3d

When listing the applications the apps lock was incorrectly
locked twice instead of being locked and then unlocked.

ASTERISK-28302

Change-Id: If7d064592a9e88c0f1049214c50e02be6dabf79e

When processing SSRC attributes we were iterating through
all of them, even though we only need to know the remote
SSRC once. This was problematic because some browsers group
SSRCs together on a stream, and due to our negotiation only
end up using the first one. Since we set the second one as
the remote SSRC we would drop the received media from them
instead of allowing it through.

In the future this may be extended to allow SSRC groups
and to use information from the attributes.

Change-Id: I4dc87087dbe56a83aa65f0f897bbd4ca75ec1270

Currently, the Asterisk does not support seperated HTTP request.
This patch make the Asterisk enables to wait lest part of HTTP request.
Also increases acceptable HTTP body length to 40k to support more
larger request.

ASTERISK-28236

Change-Id: I48a401aa64a21c3b37bf3cb4e0486d64b7dd8aa1

The current settings AST_PBX_MAX_STACK is 128 entries which is
too low for some FreePBX installations with complex parking
arrangements.  Increased to 512 if LOW_MEMORY is not defined.

ASTERISK-28300

Change-Id: I7c4b540bc92e6642df0f3da639b003f7da8b1299

This change provides an easier mechanism to determine which
subscribers are subscribed to a topic. Using this you can
inspect the specific subscribers for further details.

Change-Id: I8deea21703cd5c5357b85593b46c3eaf24e18c0c

To prevent one subsystem's taskprocessors from causing others
to stall, new capabilities have been added to taskprocessors.

* Any taskprocessor name that has a '/' will have the part
  before the '/' saved as its "subsystem".
  Examples:
  "sorcery/acl-0000006a" and "sorcery/aor-00000019"
  will be grouped to subsystem "sorcery".
  "pjsip/distributor-00000025" and "pjsip/distributor-00000026"
  will bn grouped to subsystem "pjsip".
  Taskprocessors with no '/' have an empty subsystem.

* When a taskprocessor enters high-water alert status and it
  has a non-empty subsystem, the subsystem alert count will
  be incremented.

* When a taskprocessor leaves high-water alert status and it
  has a non-empty subsystem, the subsystem alert count will be
  decremented.

* A new api ast_taskprocessor_get_subsystem_alert() has been
  added that returns the number of taskprocessors in alert for
  the subsystem.

* A new CLI command "core show taskprocessor alerted subsystems"
  has been added.

* A new unit test was addded.

REMINDER: The taskprocessor code itself doesn't take any action
based on high-water alerts or overloading.  It's up to taskprocessor
users to check and take action themselves.  Currently only the pjsip
distributor does this.

* A new pjsip/global option "taskprocessor_overload_trigger"
  has been added that allows the user to select the trigger
  mechanism the distributor uses to pause accepting new requests.
  "none": Don't pause on any overload condition.
  "global": Pause on ANY taskprocessor overload (the default and
  current behavior)
  "pjsip_only": Pause only on pjsip taskprocessor overloads.

* The core pjsip pool was renamed from "SIP" to "pjsip" so it can
  be properly grouped into the "pjsip" subsystem.

* stasis taskprocessor names were changed to "stasis" as the
  subsystem.

* Sorcery core taskprocessor names were changed to "sorcery" to
  match the object taskprocessors.

Change-Id: I8c19068bb2fc26610a9f0b8624bdf577a04fcd56

Event type filtering is now enabled, and configurable per application. An app is
now able to specify which events are sent to the application by configuring an
allowed and/or disallowed list(s). This can be done by issuing the following:

PUT /applications/{applicationName}/eventFilter

And then enumerating the allowed/disallowed event types as a body parameter.

ASTERISK-28106

Change-Id: I9671ba1fcdb3b6c830b553d4c5365aed5d588d5b

Some tests require Asterisk to execute scripts which
are stored in /tmp. When mount is used for tmpfs there
is no ability to allow scripts to be executed from
that location.

This change switches to using tmpfs which can be told
to allow executables to be run from /tmp.

Change-Id: I0e598ca2b76af1f7f2d29f0da7b1731a214a291a

Added 'ast_json_object_string_get' to the JSON wrapper in order to make it a
little easier to retrieve a string field from the JSON object.

Also added an 'ast_strings_equal' function that safely checks (checks for NULLs)
for equality between two strings.

Change-Id: I26f0a16d61537505eb41b4b05ef2e6d67fc2541b

This change add ability to set the wrapuptime per-member using the
AddQueueMember application.

The feature to set wrapuptime per member was include in the issue
ASTERISK-27483 for static member by configuration file and was not
added to set from AddQueueMember.

ASTERISK-28055 #close

Change-Id: I7c7ee4a6f804922cd7c42cb02eea26eb3806c6cf

p2p_write updates txformat but doesn't require a smoother.  If a smoother
was created by another bridge type the smoother could fall out of date causing
one way audio issues.  To prevent this the smoother is now destroyed on the
start of native bridge.

ASTERISK-28284 #close

Change-Id: I84e67f144963787fff9b4d79ac500514fb40cdc6

Currently, the pjsip show channelstats cli does not show channel's
stats after hits the invalid channel info. This makes hard to use
this cli. Changed to keep iterate after hits the invalid channel
info.

ASTERISK-28292

Change-Id: I3efdff1c9e1b1efd3c971fb82ae77aa133a6f43c

Currently, the Asterisk's pjsip_session module does not keeping the
rtcp's stats info after it was removed. But by adding the results
vector and keeping it until session is destroying, it can give more
useful information for other modules.

ASTERISK-28253

Change-Id: Ib25c2d3fc4da084aecfde2a82c1b1d733bd64fa5