* Split off load_dlopen to perform actual dlopen, check results and log
  warnings when needed.
* Always use RTLD_NOW.
* Use flags which minimize number of calls to dlopen required.  First
  attempt always uses RTLD_GLOBAL when global_symbols_only is enabled,
  RTLD_LOCAL when it is not.

This patch significantly reduces the number of dlopen's performed.  With
299 modules my system ran dlopen 857 times before this patch, 655 times
after this patch.

Change-Id: Ib2c9903cfddcc01aed3e01c1e7fe4a3fb9af0f8b

This protects the module loader itself against crashing if dlopen is
called on a module from outside loader.c.

* Expand scope of lock inside ast_module_register to include reading of
  resource_being_loaded.
* NULL check resource_being_loaded.
* Set resource_being_loaded NULL as soon as dlopen returns.  This fixes
  some error paths where it was not NULL'ed.
* Create module_destroy function to deduplicate code from
  ast_module_unregister and modules_shutdown.
* Resolve leak that occured if a module did not successfully register.
* Simplify checking for successful registration.

Change-Id: I40f07a315e55b92df4fc7faf525ed6d4f396e7d2

add_crypto_to_stream wasn't checking for a NULL
session->inv_session->neg before calling pjmedia_sdp_neg_get_state.
This was causing a crash if the negotiation hadn't already been
completed and asterisk was compiled with --enable-dev-mode.

Change-Id: I57c6229954a38145da9810fc18657bfcc4d9d0c9

This no longer appears to exist, so no sense in causing confusion.

ASTERISK-27175 #close
Reported by: Tzafrir Cohen

Change-Id: Idde967924c69f6a741dc9a5ab7dacb44d22cf100

Added links to the wiki to replace references to outdated
tex docs.

ASTERISK-27430
Reported by: Corey Farrell

Change-Id: I5007e732b30bc7b63d124c530ae8857c89991209

Currently, to figure out specified voicemail's status, there's only one
way to do it, which is use a VoicemailUserEntry AMI message.
But it consumed it too much resource(it check everything).
So, added new AMI action.

ASTERISK-27470

Change-Id: Ie4eba1424a142e5fbd1d9fb1821a3fc1a1e238b7

When the RTCP code was transitioned over to Stasis a code change
was made to keep track of how many reports are present. This count
controlled where report blocks were placed in the RTCP report.

If a compound RTCP packet was received this logic would incorrectly
place a report block in the wrong location resulting in a write
to an invalid location.

This change removes this counting logic and always places the report
block at the first position. If in the future multiple reports are
supported the logic can be extended but for now keeping a count
serves no purpose.

ASTERISK-27382
ASTERISK-27429

Change-Id: Iad6c8a9985c4b608ef493e19c421211615485116

When a connected line update is sent to an endpoint we do not request
a specific stream topology to be used. Previously this resulted in the
configured stream topology being used which may actually differ from the
currently negotiated topology. PJSIP is helpful in this regard in that
it will fill in any missing streams with removed ones. This results in
our own state not matching the SDP, though, and we do not apply the
negotiated SDP.

This change tweaks the code to use the actively negotiated stream
topology if it is present with a fallback to the configured one. This
results in the SDP and the state having matching information and the
world is happy.

ASTERISK*27397

Change-Id: I7a57117f0183479e6884b7bf3a53bb8c7464f604

A patch for sending in-dialog SIP NOTIFY message
with "SIPnotify" AMI action.

ASTERISK-27461

Change-Id: I5797ded4752acd966db6b13971284db684cc5ab4

This is a partial fix for ASTERISK~25817 but does not address the
comments regarding RFC 5626.

Change-Id: I227e2d10c0035bbfa1c6e46ae2318fd1122d8420

Stripping the DNID in a SIP dial string can result in attempting to call
the argument parsing macros on an empty string, causing a crash.

ASTERISK-26131 #close
Reported by: Dwayne Hubbard
Patches:
	dw-asterisk-master-dnid-crash.patch (license #6257) patch
	uploaded by Dwayne Hubbard

Change-Id: Ib84c1f740a9ec0539d582b09d847fc85ddca1c5e

Recently menuselect has randomly produced an error stating that
configure was just run and make had to be restarted.  I believe this is
due to an incorrect menuselect/Makefile rule.  The original rule
produced an error if makeopts or autoconfig.h were older than
makeopts.in or autoconfig.h.in.  I believe this can create an issue if
makeopts is older than autoconfig.h.in or if autoconfig.h is older than
makeopts.in.  The new rules compare files independently.

Change-Id: Ibca155035fa1392c95e33cbf25f257902abba17b

This patch does three things associated with the initial incoming INVITE
request URI.

1) Add access to the full initial incoming INVITE request URI.

2) We were not setting DNID on incoming PJSIP channels.  The DNID is the
user portion of the initial incoming INVITE Request-URI.  The value is
accessed by reading CALLERID(dnid).

3) Fix CHANNEL(pjsip,target_uri) documentation.

* The initial incoming INVITE request URI is now available using
CHANNEL(pjsip,request_uri).

* Set the DNID on PJSIP channel creation so CALLERID(dnid) can return the
initial incoming INVITE request URI user portion.

* CHANNEL(pjsip,target_uri) now correctly documents that the target URI is
the contact URI.

* Refactored print_escaped_uri() out of channel_read_pjsip() to handle
pjsip_uri_print() error condition when the buffer is too small.

ASTERISK-27478

Change-Id: I512e60d1f162395c946451becb37af3333337b33

Support for these protocols was added in the same commit as the 'proto'
field, so we can safely use the same ./configure check.

For reference: https://trac.pjsip.org/repos/changeset/4968

Change-Id: Icf4975d785d6bfb8f30ac7ffa695a0adf9382dac

Change-Id: I51f6945c4023cb93fc7b87be5ab4c50e9e6ee27d

Handle CLI initialization before any processing occurs.

Change-Id: I598b911d2e409214bbdfd0ba0882be1d602d221c

Change-Id: Ib8d45bbdfbda81e65045f6dff874d189b74e5471

ASTERISK-27475 #close

Change-Id: If7384bc6ed002ef140dec69798d14c52b7cfd800

Use the new ast_cli_completion_add() function to improve completion
performance for commands like 'pjsip show endpoint.'

Change-Id: I76d802294d2ac1766110dc75f7d117c8541ce348

Using the LIKE operator requires a full table scan of 'astdb', whereas a
comparison operation is able to use the primary key index.

This patch adds a new function to the AstDB API for quick prefix matches
and updates res_sorcery_astdb to utilize it. This showed substantial
performance improvement in my test environment.

Related to ASTERISK~26806, but does not completely resolve it.

Change-Id: I7d37f9ba2aea139dabf2ca72d31fbe34bd9b2fa1