- Apr 29, 2015
-
-
Matt Jordan authored
The patch in 0b6410c4 did correctly fix a memory leak of the DTLS structures in the RTP engine. However, when a 'core reload' is issued, a double free of the memory pointed to by the char *'s in the DTLS configuration struct can occur, as ast_rtp_dtls_cfg_free does not set the pointers to NULL when they are freed. This patch sets those pointers to NULL, preventing a second call to ast_rtp_dtls_cfg_free from corrupting memory. ASTERISK-25022 Change-Id: I820471e6070a37e3c26f760118c86770e12f6115
-
Mark Michelson authored
-
Matt Jordan authored
-
Joshua Colp authored
-
Corey Farrell authored
This function allows code to run ao2_ref against the real object associated with a weakproxy. It is useful when all of the following conditions are true: * You have a pointer to weakproxy. * You do not have or need a pointer to the real object. * You need to ensure the real object exists and is not destroyed during a process. In this case it's wasteful to store a pointer to the real object just for the sake of releasing it later. Change-Id: I38a319b83314de75be74207a8771aab269bcca46
-
Mark Michelson authored
-
Mark Michelson authored
Odd behaviors have been observed during outbound registrations. The most common problem witnessed has been one where a request with authentication credentials cannot be created after receiving a 401 response. Other behaviors include apparently processing an incorrect SIP response. Inspecting the code led to an apparent issue with regards to how we handle transactions in outbound registration code. When a response to a REGISTER arrives, we save a pointer to the transaction and then push a task onto the registration serializer. Between the time that we save the pointer and push the task, it's possible for the transaction to be destroyed due to a timeout. It's also possible for the address to be reused by the transaction layer for a new transaction. To allow for authentication of a REGISTER request to be authenticated after the transaction has timed out, we now hold a reference to the original REGISTER request instead of the transaction. The function for creating a request with authentication has been altered to take the original request instead of the transaction where the original request was sent. ASTERISK-25020 Reported by Mark Michelson Change-Id: I756c19ab05ada5d0503175db9676acf87c686d0a
-
Joshua Colp authored
Change-Id: Ic8322f04e37842848ad72cf2871bd0378f67c4ac
-
Matt Jordan authored
Merge "chan_pjsip: Creating Channel Causes Asterisk to Crash When Duplicate AOR Sections Exist in pjsip.conf"
-
Matt Jordan authored
* changes: res_pjsip: Remove incorrect MODULEINFO from presence_xml.c. Git Migration: Create doc/rest-api when needed.
-
Matt Jordan authored
-
Corey Farrell authored
Remove incorrect MODULEINFO block and unneeded header includes from presence_xml.c. ASTERISK-25027 Reported by: Corey Farrell Change-Id: I977c609ab9d1fe05373027c4138900f6985990eb
-
Corey Farrell authored
Create the directory './doc/rest-api' at the start of 'make ari-stubs' to prevent an error when documentation is generated. The directory is also added to git ignores. ASTERISK-25027 Reported by: Corey Farrell Change-Id: Iaccc7f0138501c23aa78feaca2f3cce9e68cbc1b
-
Joshua Colp authored
-
Corey Farrell authored
* Add AST_DEVMODE to BUILDOPTS * Use BUILDOPTS to generate AST_BUILDOPT_SUM. * Remove loop that defined AST_MODULE_* These changes ensure that only ABI effecting options are considered for AST_BUILDOPT_SUM. This also reduces unneeded full system rebuilds caused by enabling or disabling one module that another is dependent on. ASTERISK-25028 #close Reported by: Corey Farrell Change-Id: I2c516d93df9f6aaa09ae079a8168c887a6ff93a2
-
Corey Farrell authored
This switches files used to generate other sources to use the new ASTERISK_REGISTER_FILE macro. ASTERISK-25026 #close Reported by: Corey Farrell Change-Id: Ieb2537b83421cad07c8955e5f90c405ccf079740
-
Joshua Colp authored
-
- Apr 28, 2015
-
-
Mark Michelson authored
-
Yousf Ateya authored
Flags are 64 bits. Without LLU suffix the value of 1<<31 is negative. Although it doesn't have an effect on the current implementation, it will be problem if more flags are added. Change-Id: Ic290c81cfbbbf062872392d99d3322932cc49487
-
Ashley Sanders authored
Sections Exist in pjsip.conf This patch modifies the current loading strategy of the pjsip configuration. If duplicate sections (e.g. sections containing the same [id/type]) are defined in [pjsip.conf], the loader will consider the configuration for the given type as invalid when the duplicate section is encountered. The entire configuration (including what was previously loaded) for the duplicate [id/type] sections will be rejected and destroyed, an error message is logged and the load processing for the given stops. ASTERISK-24996 Reported By: Ashley Sanders Change-Id: I35090ca4cd40f1f34881dfe701a329145c347aef
-
Richard Mudgett authored
Change-Id: I51179e2a83937423676da522b766f1126de4059e
-
Mark Michelson authored
When problems occur regarding outbound registrations, it currently is difficult to debug. Most off-nominal paths had warning messages, but sometimes we want to know what's going on before hitting the off-nominal path. This patch adds lots of debugging output that should give a clearer picture of what is happening with regards to outbound registrations. ASTERISK-25020 Reported by Mark Michelson Change-Id: I577bde7860be0a6c872b5bcb4d5047340bf45d45
-
Joshua Colp authored
-
Steve Davies authored
ao2 ref leak in res_rtp_asterisk.c when a DTLS policy is created. The resources are linked into a table, but the original alloc refs are never released. ast_strdup leak in rtp_engine.c. If ast_rtp_dtls_cfg_copy() is called twice on the same destination struct, a pointer to an alloc'd string is overwritten before the string is free'd. ASTERISK-25022 Reported by: one47 Change-Id: I62a8ceb8679709f6c3769136dc6aa9a68202ff9b
-
Joshua Colp authored
-
Matt Jordan authored
-
Rodrigo Ramírez Norambuena authored
Change-Id: I3866a20019b1a3a2f10fe36640053929330b0fcb
-
Rodrigo Ramírez Norambuena authored
Change-Id: I534ea0f22759e3633585dfa9b145b4a284efe67f
-
- Apr 27, 2015
-
-
Corey Farrell authored
* The REF_DEBUG compiler flag no longer has any effect on code that uses Astobj2. It is used to determine if reference debugging is enabled by default. Reference debugging can be enabled or disabled in asterisk.conf. * Caller information is provided in logger errors for ao2 bad magic numbers. * Optimizes AO2 by merging internal functions with the public counterpart. This was possible now that we no longer require a dual ABI. ASTERISK-24974 #close Reported by: Corey Farrell Change-Id: Icf3552721fe999365ba8a8cf00a965aa6b897cc1
-
George Joseph authored
Permanent contacts that hadn't been qualified yet were missing their contact_status entries causing SEGVs when running CLI commands. This patch makes sure that contact_statuses are created for both dynamic and permanent contacts when they are created. It also adds checks in the CLI code to make sure there's a contact_status, just in case. ASTERISK-25018 #close Reported-by: Ivan Poddubny Tested-by: Ivan Poddubny Tested-by: George Joseph Change-Id: I3cc13e5cedcafb24c400368b515b02d7fb81e029
-
Rodrigo Ramírez Norambuena authored
Add new column to INSERT new columns added in cdr 1.8 version. The columns are: * peeraccount * linkedid * sequence This feature is configurable in cdr_odbc.conf using a new configuration option, 'newcdrcolumns'. ASTERISK-24976 #close Change-Id: Ibe0c7540a88305c6012786f438a0813ad8b19127
-
- Apr 26, 2015
-
-
Matt Jordan authored
A typo in commit f8e21a1a resulted in a compilation error in chan_skinny. This patch fixes the typo. ASTERISK-24917 Change-Id: Id7f4ad1fe948eb2408622e80c27936ce4516c33c
-
Matt Jordan authored
-
- Apr 24, 2015
-
-
Matt Jordan authored
-
Matt Jordan authored
-
Kevin Harwell authored
Confbridge dynamic profiles did not have a default profile unless you explicitly used Set(CONFBRIDGE(bridge,template)=default_bridge). If a template was not set prior to the bridge being created then some options were left with no default values set. This patch makes it so the default templates are set to the default bridge and user profiles. ASTERISK-24749 #close Reported by: philippebolduc Change-Id: I1bd6e94b38701ac2112d842db68de63d46f60e0a
-
Joshua Colp authored
-
Joshua Colp authored
-
Olle E. Johansson authored
Change-Id: I8f3d0a6c3f1075a1f7d8308593394611a96749de
-
Mark Michelson authored
The way PJSIP generates an authenticated request is to use a previous request as a template. This means that the authenticated request will have the same Call-ID, From header (including tag), and CSeq as the original request. PJSIP generates a new branch on the Via header to indicate that this is a new transaction, though. There are some SIP implementations, though, that do not notice the change in the branch and therefore will match the authed request to the original request's transaction. Since the CSeq is the same, the server will repeat the response it sent to the original request. This patch aids interoperability by increasing the CSeq of the authed request by one. ASTERISK-24845 #close Reported by: Carl Fortin Tested by: Carl Fortin Change-Id: I39c4ca52e688a9f83bcc1878371334becdc5be01
-