Added the necessary lines to the Makefile and sounds.xml so we'll have the
Swedish sounds in all available formats in menuselect.

See also: Swedish sounds were added into the core sounds release 1.4.27.

ASTERISK-24744 #close

Reported by: Tove Hjelm
Tested by: Rusty Newton

Change-Id: Ib6f4fd177afd1667b2402735034001d4d055a908

* changes:
  CLI: Enable automatic references to modules.
  Modules: Make ast_module_info->self available to auxiliary sources.

Creating a snoop channel in ARI and spying only on a single direction (in or
out) results in CPU utilization continually increasing until the CPU is fully
consumed. This occurs because frames are being put in the opposing direction's
slin factory queue, but not being removed.

Fixed the problem by always reading and disposing of frames from the opposite
queue of the direction selected.

ASTERISK-24938 #closes

Change-Id: I935bfd15f1db958f364d9d6b3b45582c0113dd60

ASTERISK-25034
Reported by: Richard Mudgett

Change-Id: I1ff8f02124d2f4abd632a050da52c64285bb7f30

Change-Id: I26d4d2cb9cee924632ff59ef0b30a7e6a1e2b00d

A crash happens with this sequence of steps:
1) Party A is connected to party B.
2) Party B starts a DTMF attended transfer.
3) Party A hangs up while party B is dialing party C.

When party A hangs up the bridge that party A and party B are in is
dissolved and party B is kicked out of the bridge.  When party B finishes
dialing party C he attempts to move to the new bridge with party C.  Since
party B is no longer in a bridge the attempted move dereferences a NULL
bridge_channel pointer and crashes.

* Made the hold(), unhold(), ringing(), and the bridge_move() functions
tolerant of the channel not being in a bridge.  The assertion that party B
is always in a bridge is not true if the bridged peer of party B hangs up
and dissolves the bridge.  Being tolerant of not being in a bridge allows
the peer hangup stimulus to be processed by the FSM.

* Made the bridge_move() function return void since where the return value
for a failed move was checked generated a FSM coding ERROR message for a
normal off-nominal condition.

* Eliminated most uses of RAII_VAR in bridge_basic.c.

ASTERISK-25003 #close
Reported by: Artem Volodin

Change-Id: Ie2c1b14e5e647d4ea6de300bf56d69805d7bcada

This patch fixes EXITWITHTIMEOUT queue_log entry to always come with 3
parameters: position, original position and waiting time.

ASTERISK-25038 #close
Reported by: Etienne Lessard

Change-Id: I0c62045922e26bee2125e93aee1dee17eee79618

Change-Id: I57081045c72b9fcf12d5c84493278f9272c31b32

ERR_remove_state was deprecated with OpenSSL 1.0.0 and was replaced by 
ERR_remove_thread_state. ERR_load_SSL_strings and ERR_load_BIO_strings were 
called by SSL_load_error_strings already and got removed. These changes allow 
OpenSSL forks like BoringSSL to be used with Asterisk.

ASTERISK-25043 #close
Reported by: Alexander Traud
patches:
  asterisk_with_BoringSSL.patch uploaded by Alexander Traud (License 6520)

Change-Id: If1c0871ece21a7e0763fafbd2fa023ae49d4d629

Missed this module in the previous commit.  res_ari_bridges uses symbols
from res_stasis_playback and res_stasis_recording.

ASTERISK-25027 #close
Reported by: Corey Farrell

Change-Id: I90bf756abd25adfc4920d2869ebe7feb636b8c5f

Switch manager actions in pbx_config to use the registration macro that
passes the module pointer, allowing pbx_config reference to be bumped
while the manager actions run.

ASTERISK-25061 #close
Reported by: Corey Farrell

Change-Id: I422c50dd74814616ac10c5e9c6598a0b1bc2c44e

A recent change went into Asterisk which added reference counts to the
channels stored in a dial masquerade datastore. Unfortunately this
included a reference to the caller in a dialing operation. While all
of the dialed targets have the datastore removed from them upon dialing
completion this did not occur for the caller, causing it to have a
reference to itself that could go never go away (as it depended on
the destruction of the datastore which only happened when the channel
was destroyed). This resulted in the caller channel remaining on the
system despite it having hung up.

This change does the following to fix this issue:

1. The dial masquerade datastore is now removed from the caller upon
dialing completion, just like the dialed targets.
2. Upon destruction of the caller all the dialed targets are also
removed from the dial masquerade datastore (just in case).
3. The reference to the caller has been removed as it should not be
possible for the datastore to now be valid/useful after the lifetime
of the caller has ended.

ASTERISK-25025 #close

Change-Id: I1ef4ca5ca04980028604cc2af5d2992ac3431b3f

* Pass module to ast_cli_register and ast_cli_register_multiple.
* Add a module reference before executing any CLI callback, remove
  the reference when complete.

ASTERISK-25049 #close
Reported by: Corey Farrell

Change-Id: I7aafc7c9f2b912918f28fe51d51e9e8a755750e3

ast_module_info->self is often needed to register items with the core.  Many
modules have ad-hoc code to make this pointer available to auxiliary sources.
This change updates the module build process to make the needed information
available to all sources in a module.

ASTERISK-25056 #close
Reported by: Corey Farrell

Change-Id: I18c8cd58fbcb1b708425f6757becaeca9fa91815

Renamed AST_VECTOR_INSERT to AST_VECTOR_REPLACE because it really
does replace not insert.  The few users of AST_VECTOR_INSERT were
refactored.  Because these are macros, there should be no ABI
compatibility issues.

Added AST_VECTOR_INSERT_AT that actually inserts an element into the
vector at a specific index pushing existing elements to the right.

Added AST_VECTOR_GET_CMP that can retrieve from the vector based
on a user-provided compare function.

Added AST_VECTOR_CALLBACK function that will execute a function
for each element in the vector.  Similar to ao2_callback and
ao2_callback_data functions although the vector callback can take
a variable number of arguments.  This should allow easy migration
to a vector where a container might be too heavy.

Added read/write locked vector and lock manipulation macros.

Added unit tests.

ASTERISK-25045 #close

Change-Id: I2e07ecc709d2f5f91bcab8904e5e9340609b00e0

This adds a test that will fail if any test failed to register. Also fail
if any test registration produced a warning about missing a leading or
trailing slash.

ASTERISK-25053 #close
Reported by: Corey Farrell

Change-Id: I93e50b8fcbcfa7f1f5b41b2c44a51685c09529c3

Apply the negative connection cache setting to all connections,
even those that are not pooled. This ensures that the connection
will not be  re-established before the negative connection cache
time is met.

ASTERISK-22708 #close

Change-Id: I431cc2e8584ab0b6908b3523d0a0e18c9a527271

Format interfaces cannot be unregistered, so the modules that provide them
need to be held open except by shutdown.

ASTERISK-25054 #close
Reported by: Corey Farrell

Change-Id: Iadbd9675bf0d30b8fded5a739b163db3ea2db8f3

The upgrade script for auto DTMF mode (31cd4f4891ec) added in 88b0fa77
failed to add ENUM support for Postgres databases. This requires a
specific import from the sqlalchemy.dialects.postgresql package. This
patch corrects this error, which allows for Postgres update scripts to
be generated.

ASTERISK-24706

Change-Id: I4742ac8efa533cd6f18e0bdd907b339a9aedf015

ASTERISK-25053
Reported by: Corey Farrell

Change-Id: I8c0375dd0818747b2d2e1ceaea87bfbeb2daf8d4