... and clean them both up on uninstall.

We've fixed the issue where 'make install' was installing to
/usr/lib on 64-bit systems that use /usr/lib64.  Now we need
to clean up the remnants in /usr/lib.

* 'make install' now prints a warning if DESTDIR/ASTLIBDIR
  contains 'lib64' and libasterisk* shared libraries or modules
  are also found in DESTDIR/ASTLIBDIR with 'lib64' transformed
  to 'lib'.

* 'make uninstall' ALWAYS cleans up both DESTDIR/ASTLIBDIR and
  DESTDIR/ASTLIBDIR with 'lib64' transformed to 'lib'.

ASTERISK-26705

Change-Id: I6edddeb3c07a51e7c7ba7cac3c05e4bf3ec3f01f

On some platforms a multiarch approach is used for libraries.
The build system does not take this into account and still
places libraries into the lib directory if no --libdir is
specified to configure. On initial startup this results in
libasteriskssl.so not being found, as it is not in the multiarch
lib directory.  To make matters worse, options were being passed
to ldconfig on both Linux and FreeBSD that actually prevented
the rebuild of the cache.

 * Fedora has a /usr/share/config.site that automatically tells
   autoconf to use /usr/lib64 but CentOS does not. This logic was
   copied to configure.ac and modified so systems like Ubuntu,
   which still use /usr/lib for 64-bit systems, aren't affected.

Now that we have them in the correct directory...

In order for the system loader to find libasteriskssl and
libasteriskpj, one of 3 things has to happen...

  - The linker cache must be rebuilt including the directory
    where the libasterisk* libraries were installed.  Only root
    can rebuild the cache.  This was busted.
  - We have to link the asterisk binary with an rpath pointing
    to the directrory where the libasterisk* libraries were
    installed.  This makes things very complicated and will happen
    over the collective dead bodies of everyone who's had to
    package a distribution with an rpath.
  - Finally, you can start asterisk with LD_LIBRARY_PATH set to the
    directrory where the libasterisk* libraries were installed.

There are no other options. So...

 * The invokation of ldconfig has been moved from main/Makefile
   to ASTTOPDIR/Makefile, the options have been removed, and
   DESTDIR/ASTLIBDIR appended.  If you aren't root, you will be
   warned after the "Asterisk Installation Compete" banner that
   you must re-run 'make install' as root, manually run
   'ldconfig DESTDIR/ASTLIBDIR' as root, or run asterisk with
   LD_LIBRARY_PATH.

ASTERISK-26705

Change-Id: I2a64b7c33a7d3e9bde20f47e3d3ab771977af982

Added tests for bzip2, tar, patch, sed and nm to configure.ac.

Set DOWNLOAD_TO_STDOUT to a working command line regardless of
whether the download program is wget, curl or fetch.

Added a 'configure.m4' file to the third-party directory which takes
care of calling any third-party project setup.  Had to move some
pjproject_bundled stuff up in configure.ac so it was called before
the third-party configure macro.

The pjproject tarball is now downloaded to the externals_cache_dir if
it was specified on the ./configure command line

Removed regeneration of the pjproject aconfigure file.  It was only
needed for an old patch that no longer applies.

Converted the tests for symbols to explicit tests since we know that
they're now available in the bundled version.  Saves a little time
during configure.

ASTERISK-26416 #close
Reported-by: Corey Farrell

Change-Id: Id1d94251c0155f8dd41b7de7067f35cfbaafbb9b
(cherry picked from commit e6b0053d)
(cherry picked from commit a0d02f38)

The DPMA and g729a, silk, siren7 and siren14 codecs hosted at
http://downloads.digium.com/pub/telephony/ are now listed in the
"External" sections of the "Resource Modules" and "Codec Translators"
pages in menuselect.  Any that are selected will automatically be
downloaded and installed when "make install" is run.  Their LICENSE and
README (if avaialble) files will be installed to
ASTVARLIBDIR/documentation/thirdparty/<product_name>.

Example use with codecs:

The codecs/codecs.xml file is a menuselect style xml file that lists
the codecs to be included.  Their support levels are 'external', which
triggers the download and install, and defaultenabled is no.  Also
because codec_g729a is actually in a directory named codec_g729 on the
download server, the newly added 'member_data' element is used to
override the default of the directory name being the package name.  You
can use the 'directory_name' attribute to keep default base URL
(http://downloads.digium.com/pub/telephony/) but use the new directory,
or you use the 'remote_url' attribute to specify a full URL to the
download directory.  In this case, you must still follow the same
subdirectory naming conventions as that used for the packages located
at 'http://downloads.digium.com/pub/telephony'.

A new configure option '--with-externals-cache' was added and like
'--with-sounds-cache' it allows the installer to cache tarballs so
they're not downloaded every time.

To assist with the download and install process, each external package
now has a manifest.xml file that, among other things, contains a package
version and checksums for each file in the tarball.  The manifest is
saved to both the cache directory and ASTMODDIR and together with the
manifest.xml on the downloads site, tells the install scripts whether
a download and/or update is needed.

bash and xmlstarlet are required for downloader operation.  If they're
not installed, the external items in menuselect will be unavailable.

Change-Id: Id3dcf1289ffd3cb0bbd7dfab3cafbb87be60323a

Since Asterisk 12, the documentation got an XML Stylesheet. Because of a typo,
the XML Declaration and DTD were overwritten by this.

ASTERISK-26212 #close

Change-Id: If5ee4625068042e98ab3fcb22a25e2f15d0c68bd

ASTERISK-26038 #close

Change-Id: I5746cf639f3fdc6332e8a97cf01f979e30bf403f

There are more specific checks for the platform.

Specifically this allows installing OS/X init scripts.

ASTERISK-26038 #close

Change-Id: If08933621145b10362a0cfe73c079301d9c13f50
Signed-off-by: Tzafrir Cohen <tzafrir.cohen@xorcom.com>

Background here:
http://lists.digium.com/pipermail/asterisk-dev/2016-January/075266.html

From CHANGES:
 * To help insure that Asterisk is compiled and run with the same known
   version of pjproject, a new option (--with-pjproject-bundled) has been
   added to ./configure.  When specified, the version of pjproject specified
   in third-party/versions.mak will be downloaded and configured.  When you
   make Asterisk, the build process will also automatically build pjproject
   and Asterisk will be statically linked to it.  Once a particular version
   of pjproject is configured and built, it won't be configured or built
   again unless you run a 'make distclean'.

   To facilitate testing, when 'make install' is run, the pjsua and pjsystest
   utilities and the pjproject python bindings will be installed in
   ASTDATADIR/third-party/pjproject.

   The default behavior remains building with the shared pjproject
   installation, if any.

Building:

   All you have to do is include the --with-pjproject-bundled option on
   the ./configure command line (and remove any existing --with-pjproject
   option if specified).  Everything else is automatic.

Behind the scenes:

   The top-level Makefile was modified to include 'third-party' in the
   list of MOD_SUBDIRS.

   The third-party directory was created to contain any third party
   packages that may be needed in the future.  Its Makefile automatically
   iterates over any subdirectories passing on targets.

   The third-party/pjproject directory was created to house the pjproject
   source distribution.  Its Makefile contains targets to download, patch
   configure, generate dependencies, compile libs, apps and python bindings,
   sanitized build.mak and generate a symbols list.

   When bootstrap.sh is run, it automatically includes the configure.m4
   file in third-party/pjproject.  This file has a macro to download and
   conifgure pjproject and get and set PJPROJECT_INCLUDE, PJPROJECT_DIR
   and PJPROJECT_BUNDLED.  It also tests for the capabilities like
   PJ_TRANSACTION_GRP_LOCK by parsing preprocessor output as opposed to
   trying to compile.  Of course, bootstrap.sh is only run once and the
   configure file is incldued in the patch.

   When configure is run with the new options, the macro in configure.m4
   triggers the download, patch, conifgure and tests.  No compilation is
   performed at this time.  The downloaded tarball is cached in /tmp so
   it doesn't get downloaded again on a distclean.

   When make is run in the top-level Asterisk source directory, it will
   automatically descend all the subdirectories in third_party just as it
   does for addons, apps, etc.  The top-level Makefile makes sure that
   the 'third-party' is built before 'main' so that dependencies from the
   other directories are built first.

   When main does build, a new shared library (libasteriskpj) is created that
   links statically to the pjproject .a files and exports all their symbols.
   The asterisk binary links to that, just as it does with libasteriskssl.

   When Asterisk is installed, the pjsua and pjsystest apps, and the pjproject
   python bindings are installed in ASTDATADIR/third-party/pjproject.  This
   will facilitate testing, including running the testsuite which will be
   updated to check that directory for the pjsua module ahead of the system
   python library.

Modules should continue to depend on pjproject if they use pjproject APIs
directly.  They should not care about the implementation.  No changes to any
res_pjsip modules were made.

Change-Id: Ia7a60c28c2e9ba9537c5570f933c1ebcb20a3103

The Makefile only optionally includes makeopts so when goals like uninstall that
dont depend on anything else are run after a distclean, rules like
'rm -f "$(DESTDIR)$(ASTMODDIR)/"*' get run as 'rm -f ""/*' which attempts
to remove everything in the root directory.

Although there's a rule defined for makeopts which prints a message and does
an 'exit 1', since '-include makepopts' was specified (with the -), the exit
was ignored letting the rest of the rules run.

This patch makes makeopts required unless the goal has the string 'clean' in it.

ASTERISK-25730 #close
Reported-by: George Joseph

Change-Id: I1bce59a7ea4f48e7a468e22b2abbb13c63417ac7

* Add 'check-alembic' target to root Makefile.
* Create build_tools/make_check_alembic to do the actual checks.

ASTERISK-25685

Change-Id: Ibb3cae7d1202ac23dc70b0f3b5801571ad46b004

A previous commit reduced the AST_BUILDOPTS compiler define to
only include options that affected ABI.  This included some options
that were previously displayed by cli "core show settings".  This
change corrects the CLI display while still restricting buildopts.h
to ABI effecting options only.

ASTERISK-25434 #close
Reported by: Rusty Newton

Change-Id: Id07af6bedd1d7d325878023e403fbd9d3607e325

This patch adds a rule for installing the Super Awesome Company based 'Basic
PBX' configuration files. As part of adding this rule, a bit of the content
that makes up installing the configuration files under the 'samples' target
was refactored into a make subroutine for usage by additional later config
make targets.

Change-Id: I6c2e27906f73e2919a2b691da0be20ae70302404

To help in diagnosing mismatched modules and libraries, this
script scans for version, repository, and source information
and reports what is found.

ASTERISK-25376 #close
Reported by: Ashley Sanders

Change-Id: Ib0642d0fb96712476f59760d6d137a24633fe2d6

 * Add some type casting so tv_usec can really be a long, instead of
   some strange platform specific type.

 * Add some .dylib style files to .gitignore.

 * Switch from using -Xlinker to -Wl,. For [reasons unknown][], newer
   versions of GCC, when compiling the Homebrew formula for Asterisk,
   are not properly passing the -Xlinker options to the linker. Given
   that -Wl, does exactly the [same thing][], and does it properly, this
   patch changes the -Xlinker options to use -Wl, instead.

 [reasons unknown]: http://bit.ly/1SUbEYx
 [same thing]: https://gcc.gnu.org/onlinedocs/gcc/Link-Options.html

Change-Id: Id5e6b3c6cc86282ea5fca630dc3991137c5bf4dd

MAKE_MENUSELECT currently sets CC to CC, which is the compiler for the
target platform. But menuselect is to be run on the build system, so
BUILD_CC needs to be used instead - like it was in the past, before the
recent changes (https://reviewboard.asterisk.org/r/4370/). This is the
patch for ASTERISK-25074.

ASTERISK-25074 #close
Reported by: Sebastian Kemper
Tested by: Sebastian Kemper

Change-Id: I8a2b1fc5deb6ad2b80f49baca35b1b13d468ebf8

Moved contrib/asterisk-ng-doxygen to doc/asterisk-ng-doxygen.in

Changed /Makefile to copy asterisk-ng-doxygen.in to
asterisk-ng-doxygen then modify it with version instead of
modifying asterisk-ng-doxygen directly.  Updated clean
targets as well.

Updated /.gitignore and doc/.gitignore.

Change-Id: I38712d3e334fa4baec19d30d05de8c6f28137622

Create the directory './doc/rest-api' at the start of 'make ari-stubs'
to prevent an error when documentation is generated.  The directory is
also added to git ignores.

ASTERISK-25027
Reported by: Corey Farrell

Change-Id: Iaccc7f0138501c23aa78feaca2f3cce9e68cbc1b

The Makefile claims that you can set default menuselect options by creating
~/.asterisk.makeopts or /etc/asterisk.makeopts, but they are never read.
The rule for menuselect.makeopts is only allowed to run if the active target
is 'menuselect', but the menuselect target doesn't depend on
menuselect.makeopts.  A dot (wildcard character) was added so the rule will
be active for the targets that cause it to run: nmenuselect, cmenuselect,
and gmenuselect.

ASTERISK-13271 #close
Reported by: John Nemeth

Change-Id: Ibde804ff196283def49ccb9432fbf224a22586e2

RAII_VAR, which is used extensively in Asterisk to manage reference counted
resources, uses a GCC extension to automatically invoke a cleanup function
when a variable loses scope. While this functionality is incredibly useful
and has prevented a large number of memory leaks, it also prevents Asterisk
from being compiled with clang.

This patch updates the RAII_VAR macro such that it can be compiled with clang.
It makes use of the BlocksRuntime, which allows for a closure to be created
that performs the actual cleanup.

Note that this does not attempt to address the numerous warnings that the clang
compiler catches in Asterisk.

Much thanks for this patch goes to:
* The folks on StackOverflow who asked this question and Leushenko for
  providing the answer that formed the basis of this code:
  http://stackoverflow.com/questions/24959440/rewrite-gcc-cleanup-macro-with-nested-function-for-clang
* Diederik de Groot, who has been extremely patient in working on getting this
  patch into Asterisk.

Review: https://reviewboard.asterisk.org/r/4370/

ASTERISK-24133
ASTERISK-23666
ASTERISK-20399
ASTERISK-20850 #close
Reported by: Diederik de Groot
patches:
  RAII_CLANG.patch uploaded by Diederik de Groot (License 6600)
........

Merged revisions 432807 from http://svn.asterisk.org/svn/asterisk/branches/11
........

Merged revisions 432808 from http://svn.asterisk.org/svn/asterisk/branches/13


git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@432809 65c4cc65-6c06-0410-ace0-fbb531ad65f3

Review: https://reviewboard.asterisk.org/r/4118/
........

Merged revisions 426926 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........

Merged revisions 426927 from http://svn.asterisk.org/svn/asterisk/branches/11
........

Merged revisions 426933 from http://svn.asterisk.org/svn/asterisk/branches/12
........

Merged revisions 426934 from http://svn.asterisk.org/svn/asterisk/branches/13


git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@426935 65c4cc65-6c06-0410-ace0-fbb531ad65f3

This change ensures refcounter.py is installed to a place where it
can be found by the Asterisk testsuite if REF_DEBUG is enabled.

ASTERISK-24432 #close
Reported by: Corey Farrell
Review: https://reviewboard.asterisk.org/r/4094/
........

Merged revisions 426830 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........

Merged revisions 426831 from http://svn.asterisk.org/svn/asterisk/branches/11
........

Merged revisions 426832 from http://svn.asterisk.org/svn/asterisk/branches/12
........

Merged revisions 426833 from http://svn.asterisk.org/svn/asterisk/branches/13


git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@426834 65c4cc65-6c06-0410-ace0-fbb531ad65f3

gcc on the ARM platform defaults 'char' to 'unsigned char' whereas Intel and
SPARC default to 'signed char'.  This is only an issue in the rare cases where
negative values are assigned to a 'char' but this this patch insures
compatibility by detecting platforms that default to 'unsigned' and adding an
'-fsigned-char' flag to _ASTCFLAGS.

If compiling for ARM (native or cross-compile) be sure to run ./bootstrap.sh
and ./configure to regenerate the build files.  You shouldn't have to do this
for Intel or SPARC.

Tested-by: George Joseph

Review: https://reviewboard.asterisk.org/r/4091/
........

Merged revisions 425964 from http://svn.asterisk.org/svn/asterisk/branches/12
........

Merged revisions 425965 from http://svn.asterisk.org/svn/asterisk/branches/13


git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@425966 65c4cc65-6c06-0410-ace0-fbb531ad65f3

The main Makefile has a target test called 'badshell' that tests if
DESTDIR does not happen to have an an-expanded tilde (~).  This might
be the case if you run: make install DESTDIR=~/somewhere/

That test also disallowed valid tildes in directory names. The test is
now changed to only trigger on a tilde at the start of the path.

ASTERISK-13797 #close
Reported by: Tzafrir Cohen

Review: https://reviewboard.asterisk.org/r/4064/
........

Merged revisions 425291 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........

Merged revisions 425292 from http://svn.asterisk.org/svn/asterisk/branches/11
........

Merged revisions 425293 from http://svn.asterisk.org/svn/asterisk/branches/12
........

Merged revisions 425294 from http://svn.asterisk.org/svn/asterisk/branches/13


git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@425295 65c4cc65-6c06-0410-ace0-fbb531ad65f3

This patch changes the install to only install the hook script if
DAHDI is enabled. It also adds the script to the uninstall task, and
moves the DAHDI_UDEV_HOOK_DIR variable so that it's not between the
_MAKEOPTS variables and their comment.

This allows installs which specify a --prefix to work normally, as
long as they don't enable DAHDI.

Review: https://reviewboard.asterisk.org/r/3972/
........

Merged revisions 423281 from http://svn.asterisk.org/svn/asterisk/branches/13


git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@423283 65c4cc65-6c06-0410-ace0-fbb531ad65f3

This moves all samples configs from configs/ to configs/samples. This allows
for additional sets of sample configuration files to be added in the future.

Review: https://reviewboard.asterisk.org/r/3804/


git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@418870 65c4cc65-6c06-0410-ace0-fbb531ad65f3

Install a hook script for DAHDI to register new spans with Asterisk
automatically by running:

  asterisk -rx 'dahdi create channel FIRST LAST'

Review: https://reviewboard.asterisk.org/r/3157/


git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@417863 65c4cc65-6c06-0410-ace0-fbb531ad65f3

This macro replaces one object reference with another cleaning up the original.

param dst Pointer to the object that will be cleaned up.
param src Pointer to the object replacing it.

src's ref count is bumped if it's non-NULL.
dst's ref count is decremented if it's non-NULL.
src is assigned to dst,

This patch was reviewed on IRC by coreyfarrell and mjordan.
 
Tested by: George Joseph
........

Merged revisions 416995 from http://svn.asterisk.org/svn/asterisk/branches/12


git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@416996 65c4cc65-6c06-0410-ace0-fbb531ad65f3

From now on, make install will overwrite safe_asterisk with the
latest version. You need to move any local modifications to files
inside /etc/asterisk/startup.d, if you have any.

See also commits r394939 and r397938.

ASTERISK-21965 #close
Patches:
  safe_asterisk.patch uploaded by jkister (License 6232, modified by me)
........

Merged revisions 415748 from http://svn.asterisk.org/svn/asterisk/branches/12


git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@415749 65c4cc65-6c06-0410-ace0-fbb531ad65f3

Apparently r408084 ( https://reviewboard.asterisk.org/r/3212/ ) broke the
build. This patch fixes it by ignoring the .lastclean dependencies if the
MENUSELECT_EMBED variable is not defined.

patches:
  tmp.diff uploaded by wdoekes (License 5674)

Review: https://reviewboard.asterisk.org/r/3228/
........

Merged revisions 408193 from http://svn.asterisk.org/svn/asterisk/branches/11
........

Merged revisions 408194 from http://svn.asterisk.org/svn/asterisk/branches/12


git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@408199 65c4cc65-6c06-0410-ace0-fbb531ad65f3

Directory 'main' only needs to depend on embedded modules. If no
module embedding is selected, the dependency is dropped.

Review: https://reviewboard.asterisk.org/r/3212/
........

Merged revisions 408083 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........

Merged revisions 408084 from http://svn.asterisk.org/svn/asterisk/branches/11
........

Merged revisions 408085 from http://svn.asterisk.org/svn/asterisk/branches/12


git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@408086 65c4cc65-6c06-0410-ace0-fbb531ad65f3

A helper script to copy a source file substituting any
__ASTERISK_<foo>_DIR__ with the content of $AST<foo>DIR.

Review: https://reviewboard.asterisk.org/r/3202/


git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@408059 65c4cc65-6c06-0410-ace0-fbb531ad65f3

This patch adds a new function, PJSIP_ENDPOINT, which lets the dialplan query,
for any endpoint, any property configured on an endpoint. This function is a
companion to the CHANNEL function, which can be used to extract the endpoint
name for a channel.

Review: https://reviewboard.asterisk.org/r/3035
........

Merged revisions 403616 from http://svn.asterisk.org/svn/asterisk/branches/12


git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403617 65c4cc65-6c06-0410-ace0-fbb531ad65f3

so that it can be served by the Asterisk web server.

I had to change the Makefile in order to recursively install content
from the static-http directory, hence the code review instead of just
putting it in.

Review: https://reviewboard.asterisk.org/r/2924/
........

Merged revisions 401261 from http://svn.asterisk.org/svn/asterisk/branches/12


git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@401263 65c4cc65-6c06-0410-ace0-fbb531ad65f3

Review: https://reviewboard.asterisk.org/r/2898/
........

Merged revisions 400279 from http://svn.asterisk.org/svn/asterisk/branches/11
........

Merged revisions 400281 from http://svn.asterisk.org/svn/asterisk/branches/12


git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@400282 65c4cc65-6c06-0410-ace0-fbb531ad65f3

........

Merged revisions 398198 from http://svn.asterisk.org/svn/asterisk/branches/12


git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@398205 65c4cc65-6c06-0410-ace0-fbb531ad65f3

The patch from ASTERISK-21965 was committed perhaps a bit too hastily. Walter
and Tzafrir have pointed out numerous issues with the approach and have
propsed an alternative in r/2757. Since it's not a time critical issue and
is not worth holding up the release of 12 for it, I've gone ahead and reverted
r394939 from 12/trunk and re-opened ASTERISK-21965.
........

Merged revisions 397938 from http://svn.asterisk.org/svn/asterisk/branches/12


git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397939 65c4cc65-6c06-0410-ace0-fbb531ad65f3

Without this, documentation defined in sub-folders is ignored. Since having
properly generated documentation is especially important in Asterisk 12 -
not having it can cause a module to not load - 'make full' needs to look in
all .c files.
........

Merged revisions 397924 from http://svn.asterisk.org/svn/asterisk/branches/12


git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397925 65c4cc65-6c06-0410-ace0-fbb531ad65f3

This prevents XML documentation duplication by expanding channel and
bridge snapshot tags into channel and bridge snapshot parameter sets
with a given prefix or defaulting to no prefix. This also prevents
documentation from becoming fractured and out of date by keeping all
variations of the documentation in template form such that it only
needs to be updated once and keeps maintenance to a minimum.

Review: https://reviewboard.asterisk.org/r/2708/


git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@395985 65c4cc65-6c06-0410-ace0-fbb531ad65f3

This patch modifies the behavior of safe_asterisk in two ways:
(1) It modifies the Asterisk Makefile such that safe_asterisk is always
    installed on a 'make install'. This was done as bugfixes in the
    safe_asterisk script were not applied in previous version of Asterisk
    without first removing the old version of the script.
(2) In order to keep a newly installed version of safe_asterisk from impacting
    local modifications, a new config file - safe_asterisk.conf.sample - has
    been provided. Settings that were previously modified in safe_asterisk can
    be set there instead.

(closes issue ASTERISK-21965)
Reported by: Jeremy Kister
patches:
  safe_asterisk.patch uploaded by jkister (License 6232)


git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@394939 65c4cc65-6c06-0410-ace0-fbb531ad65f3

This patch is the first step in adding recording support to the
Asterisk REST Interface.

Recordings are stored in /var/spool/recording. Since recordings may be
destructive (overwriting existing files), the API rejects attempts to
escape the recording directory (avoiding issues if someone attempts to
record to ../../lib/sounds/greeting, for example).

(closes issue ASTERISK-21594)
(closes issue ASTERISK-21581)
Review: https://reviewboard.asterisk.org/r/2612/


git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@393550 65c4cc65-6c06-0410-ace0-fbb531ad65f3