This patch adds a new operation for stored recordings, copy. It takes an
existing stored recording and makes a copy of it in the same directory
or a relative directory under the stored recording directory.

/ari/recordings/stored/{recordingName}/copy?destinationRecordingName={copy_name}

This is particularly useful for voicemail-esque applications, which may need to
copy or move recordings around a directory structure.

Review: https://reviewboard.asterisk.org/r/3768/

ASTERISK-24036 #close
Reported by: Sam Galarneau
Tested by: Sam Galarneau
........

Merged revisions 419021 from http://svn.asterisk.org/svn/asterisk/branches/12


git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@419022 65c4cc65-6c06-0410-ace0-fbb531ad65f3

Whenever possible, audiohooks and framehooks will now be copied over
to the channel that the masquerading channel gets cloned into. This
should occur for all audiohooks and most framehooks. As a result,
in Asterisk 12.5 and up, the AUDIOHOOK_INHERIT function is now
deprecated and its behavior is essentially the new default for all
audiohooks, plus some additional audiohooks/framehooks.

Review: https://reviewboard.asterisk.org/r/3721/
........

Merged revisions 418914 from http://svn.asterisk.org/svn/asterisk/branches/12


git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@418936 65c4cc65-6c06-0410-ace0-fbb531ad65f3

Specifically the following equivalents were created:
fax show session -> FAXSession
fax show sessions -> FAXSessions
fax show stats -> FAXStats

Review: https://reviewboard.asterisk.org/r/3666/


git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@418911 65c4cc65-6c06-0410-ace0-fbb531ad65f3

Most channel drivers let you specify a default accountcode to be set on
channels associated with a particular peer/endpoint/object. Prior to this
patch, chan_pjsip/res_pjsip did not support such a setting.

This patch adds a new setting to the res_pjsip endpoint object, 'accountcode'.
When a channel is created that is associated with an endpoint with this value
set, the channel will automatically have its accountcode property set to the
value configured for the endpoint.

Review: https://reviewboard.asterisk.org/r/3724/

ASTERISK-24000 #close
Reported by: Matt Jordan
........

Merged revisions 418756 from http://svn.asterisk.org/svn/asterisk/branches/12


git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@418757 65c4cc65-6c06-0410-ace0-fbb531ad65f3

This patch adds support for the PostgreSQL application_name connection setting.
When the appropriate PostgreSQL module's configuration is set with an
application name, the name will be passed to PostgreSQL on connection and
displayed in the database's pg_stat_activity view, as well as in CSV logs. This
aids in managing which applications/servers are connected to a PostgreSQL
database, as well as tracing the activity of those connections.

Review: https://reviewboard.asterisk.org/r/3591

ASTERISK-23737 #close
Reported by: Gergely Domodi
patches:
  pgsql_application_name.patch uploaded by Gergely Domodi (License 6610)


git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@418755 65c4cc65-6c06-0410-ace0-fbb531ad65f3

Billing records are fair,
To get paid is quite bright,
You should really use ODBC;
Good-bye cdr_sqlite.

Microsoft did once push H.323,
Hell, we all remember NetMeeting.
But try to compile chan_h323 now
And you will take quite a beating.

The XMPP and SIP war was fierce,
And in the distant fray
Was birthed res_jabber/chan_jingle;
But neither to stay.

For everyone did care and chase what Google professed.
"Free Internet Calling" was what devotees cried,
But Google did change the specs so often
That the developers were happy the day chan_gtalk died.

And then there was that odd application
Dedicated to the Polish tongue.
app_saycountpl was subsumed by Say;
One could say its bell was rung.

To read and parse a file from the dialplan
You could (I guess) use an application.
app_readfile did fill that purpose, but I think
A function is perhaps better in its creation.

Barging is rude, I'm not sure why we do it.
Inwardly, the caller will probably sigh.
But if you really must do it,
Don't use app_dahdibarge, use ChanSpy.

We all despise the sound of tinny robots
It makes our queues so cold.
To control such an abomination
It's better to not use Wait/SetMusicOnHold.

It's often nice to know properties of a channel
It makes our calls right
We have a nice function called CHANNEL
And so SIPCHANINFO is sent off into the night.

And now things get odd;
Apparently one could delimit with a colon
Properties from the SIPPEER function!
Commas are in; all others are done.

Finally, a word on pipes and commas.
We're sorry. We can't say it enough.
But those compatibility options in asterisk.conf;
To maintain them forever was just too tough.

This patch removes:

* cdr_sqlite
* chan_gtalk
* chan_jingle
* chan_h323
* res_jabber
* app_saycountpl
* app_readfile
* app_dahdibarge

It removes the following applications/functions:

* WaitMusicOnHold
* SetMusicOnHold
* SIPCHANINFO

It removes the colon delimiter from the SIPPEER function.

Finally, it also removes all compatibility options that were configurable from
asterisk.conf, as these all applied to compatibility with Asterisk 1.4 systems.

Review: https://reviewboard.asterisk.org/r/3698/



git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@418019 65c4cc65-6c06-0410-ace0-fbb531ad65f3

Adds the following AMI commands:
PRIDebugSet - Set PRI debug levels for a specific span
PRIDebugFileSet - Set the file used for PRI debug message output
PRIDebugFileUnset - Disables file output for PRI debug messages

Review: https://reviewboard.asterisk.org/r/3681/


git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@417916 65c4cc65-6c06-0410-ace0-fbb531ad65f3

Adds two new manager commands to pbx_config - DialplanExtensionAdd and
DialplanExtensionRemove which allow manager users to create and delete
extensions respectively.

Review: https://reviewboard.asterisk.org/r/3650/


git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@417910 65c4cc65-6c06-0410-ace0-fbb531ad65f3

This patch enables Perfect Forward Secrecy (PFS) in Asterisk's core TLS API.
Modules that wish to enable PFS should consider the following:

- Ephemeral ECDH (ECDHE) is enabled by default. To disable it, do not
  specify a ECDHE cipher suite in a module's configuration, for example:
  tlscipher=AES128-SHA:DES-CBC3-SHA

- Ephemeral DH (DHE) is disabled by default. To enable it, add DH parameters
  into the private key file, i.e., tlsprivatekey. For an example, see the
  default dh2048.pem at
http://www.opensource.apple.com/source/OpenSSL098/OpenSSL098-35.1/src/apps/dh2048.pem?txt

- Because clients expect the server to prefer PFS, and because OpenSSL sorts
  its cipher suites by bit strength, (see "openssl ciphers -v DEFAULT")
  consider re-ordering your cipher suites in the conf file. For example:
tlscipher=AES128+kEECDH:AES128+kEDH:3DES+kEDH:AES128-SHA:DES-CBC3-SHA:-ADH:-AECDH
  will use PFS when offered by the client. Clients which do not offer PFS
  fall-back to AES-128 (or even 3DES as recommend by RFC 3261).

Review: https://reviewboard.asterisk.org/r/3647/

ASTERISK-23905 #close
Reported by: Alexander Traud
patches:
  tlsPFS_for_HEAD.patch uploaded by Alexander Traud (License 6520)
  tlsPFS.patch uploaded by Alexander Traud (License 6520)



git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@417803 65c4cc65-6c06-0410-ace0-fbb531ad65f3

This patch adds support for the Japanese language to both the say family of
applications, as well as for VoiceMail and VoiceMailMain. A new pack of
language sounds will be released at the same time as the next major version
of Asterisk to support the new language features.

The language features can be enabled using a language code of 'ja'.

Review: https://reviewboard.asterisk.org/r/3477

ASTERISK-23324 #close
Reported by: Kevin McCoy
patches:
  app_voicemail.c.20140226.jb.patch uploaded by Kevin McCoy (License 6586)
  say.c.20140226.jb.patch uploaded by Kevin McCoy (License 6586)



git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@417591 65c4cc65-6c06-0410-ace0-fbb531ad65f3

Add missing CHANGES changes from r417361 and r417383.


git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@417423 65c4cc65-6c06-0410-ace0-fbb531ad65f3

This patch enables the jack-audiohook to cope with dynamic sampling rates from
and to Asterisk. Information from the channel is taken to derive the channel's
sampling rate, suiting SLINxx format and frame->datalen.

There are stil a few limitations after this patch:
* Required information is taken from the channel during initialization as
  the audiohook does not provide this information.
  Audiohook.internal_sampl_rate(...) is set later, but no callback is available
  to inform app_jack.

* Frame.datalen is computed using "rate / 50" assuming a ptime of 20ms.
  There is no internal API available to determine datalen for a SLINxx.

* Ringbuffer size is now dynamic depending on the value of frame.datalen
  (see above) and the number of frames, which are in RINGBUFFER_FRAME_CAPACITY,
  that need to fit.

Review: https://reviewboard.asterisk.org/r/3618

Note that the patch being committed here is based on the patch posted on
ASTERISK-23836. However, Matthis Schmieder also provided a patch to enable
this functionality, and that patch is noted below.

ASTERISK-20696 #close
Reported by: Matthis Schmieder
patches:
  app_jack.patch uploaded by Matthis Schmieder (License 6445)

ASTERISK-23836 #close
Reported by: Dennis Guse
patches:
  patch-app_jack.c uploaded by Dennis Guse (License 6513)



git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@417360 65c4cc65-6c06-0410-ace0-fbb531ad65f3

Part of a series of AMI command equivalents to existing CLI
commands

Review: https://reviewboard.asterisk.org/r/3651/


git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@416848 65c4cc65-6c06-0410-ace0-fbb531ad65f3

* SS7 support now requires libss7 v2.0 or later.  The new libss7 is not
backwards compatible.

* Added SS7 support for connected line and redirecting.

* Most SS7 CLI commands are reworked as well as new SS7 commands added.
See online CLI help.

* Added several SS7 config option parameters described in
chan_dahdi.conf.sample.

* ISUP timer support reworked and now requires explicit configuration.
See ss7.timers.sample.

Special thanks to Kaloyan Kovachev for his support and persistence in
getting the original patch by adomjan updated and ready for release.

SS7-27 #close
Reported by: adomjan


git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@416416 65c4cc65-6c06-0410-ace0-fbb531ad65f3

This patch adds a new channel function TALK_DETECT that, when set on a
channel, causes events indicating the start/stop of talking on a channel to be
emitted to both AMI and ARI clients. 

The function allows setting both the silence threshold (the length of silence
after which we decide no one is talking) as well as the talking threshold (the
amount of energy that counts as talking). Parameters can be updated on a channel
after talk detection has been enabled, and talk detection can be removed at
any time.

The events raised by the function use a nomenclature similar to existing AMI/ARI
events.
For AMI: ChannelTalkingStart/ChannelTalkingStop
For ARI: ChannelTalkingStarted/ChannelTalkingFinished

Review: https://reviewboard.asterisk.org/r/3563/

#ASTERISK-23786 #close
Reported by: Matt Jordan
........

Merged revisions 414934 from http://svn.asterisk.org/svn/asterisk/branches/12


git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@414935 65c4cc65-6c06-0410-ace0-fbb531ad65f3

Improvements to the agent pool functionality.

* AgentRequest no longer hangs up the caller if the agent fails to connect
with the caller.  It now continues in the dialplan.

* AgentRequest returns AGENT_STATUS set to NOT_CONNECTED if the agent
failed to connect with the call.  Most likely because the agent did not
acknowledge the call in time or got disconnected.

* The agent alerting play file configured by the agent.conf custom_beep
option can now be disabled by setting the option to an empty string.  The
agent is effectively alerted to a call presence when MOH stops.

* Fixed bridge reference leak when the agent connects with a caller.

ASTERISK-23499 #close
Reported by: Matt Jordan

Review: https://reviewboard.asterisk.org/r/3551/
........

Merged revisions 414747 from http://svn.asterisk.org/svn/asterisk/branches/12


git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@414748 65c4cc65-6c06-0410-ace0-fbb531ad65f3

User events can now be generated from ARI.  Events can be signalled with
arbitrary json variables, and include one or more of channel, bridge, or
endpoint snapshots.  An application must be specified which will receive
the event message (other applications can subscribe to it).  The message
will also be delivered via AMI provided a channel is attached.  Dialplan
generated user event messages are still transmitted via the channel, and
will only be received by a stasis application they are attached to or if
the channel is subscribed to.

This change also introduces the multi object blob mechanism used to send
multiple snapshot types in a single message.  The dialplan app UserEvent
was also changed to use multi object blob, and a new stasis message type
created to handle them.

ASTERISK-22697 #close
Review: https://reviewboard.asterisk.org/r/3494/
........

Merged revisions 414405 from http://svn.asterisk.org/svn/asterisk/branches/12


git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@414406 65c4cc65-6c06-0410-ace0-fbb531ad65f3

(closes ASTERISK-23397)
Reported by: Denis
Review: https://reviewboard.asterisk.org/r/3446/
........

Merged revisions 413196 from http://svn.asterisk.org/svn/asterisk/branches/12


git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@413197 65c4cc65-6c06-0410-ace0-fbb531ad65f3

These events are controlled by two new modules, res_manager_devicestate
and res_manager_presencestate.

Review: https://reviewboard.asterisk.org/r/3417



git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@413060 65c4cc65-6c06-0410-ace0-fbb531ad65f3

Introducing changes proposed to chan_unistim driver:
1) Added the unistim.conf variable dtmf_duration which can select the DTMF playback duration from 0ms to 150ms (0 is off and is the new default)
2) Enabled the transmission of month names, which are sent with the date and changed the dateformat variable to accept the values 0-3 as per the UNISTIM standard (2 & 3 match the previous 1 & 2 formats).
3) Enabled the "Mute" packet so muting microphone works as expected and microphone muted for all calls while LED light on
4) Changed Duree to Timer on i2004 display

(closes issue ASTERISK-23592)



git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@413048 65c4cc65-6c06-0410-ace0-fbb531ad65f3

(closes issue AST-1301)

(closes issue ASTERISK-19465)
Reported by: Krzysztof Chmielewski
........

Merged revisions 412821 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........

Merged revisions 412822 from http://svn.asterisk.org/svn/asterisk/branches/11
........

Merged revisions 412823 from http://svn.asterisk.org/svn/asterisk/branches/12


git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@412824 65c4cc65-6c06-0410-ace0-fbb531ad65f3

In r411189, some behavior was changed which made sendrpid behavior
act in a more trusting manner by sending full user data for peers
set with private caller presence in P-Asserted-Identity headers.
Since this changed long time expected behaviors, we decided to pull
that patch when that was pointed out by the community. Instead, this
patch provides a trust_id_outbound setting which will expose the data
per RFC-3325 if set to 'yes' and simply not send the PAI/RPID headers
at all if set to 'no'. By default trust_id_outbound will be set to
'legacy' which will preserve the behavior prior to these patches.
Extra special thanks to Walter Doekes for providing advice and
feedback.

(closes issue AST-1301)

(closes issue ASTERISK-19465)
Reported by: Krzysztof Chmielewski

Review: https://reviewboard.asterisk.org/r/3447/
........

Merged revisions 412744 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........

Merged revisions 412746 from http://svn.asterisk.org/svn/asterisk/branches/11
........

Merged revisions 412747 from http://svn.asterisk.org/svn/asterisk/branches/12


git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@412759 65c4cc65-6c06-0410-ace0-fbb531ad65f3

Previously multiple play actions against a bridge at one time would cause
the sounds to play simultaneously on the bridge. Now if a sound is already
playing, the play action will queue playback to occur after the completion
of other sounds currently on the queue.

(closes issue ASTERISK-22677)
Reported by: John Bigelow
Review: https://reviewboard.asterisk.org/r/3379/
........

Merged revisions 412639 from http://svn.asterisk.org/svn/asterisk/branches/12


git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@412641 65c4cc65-6c06-0410-ace0-fbb531ad65f3

Adds a tones URI type to the playback resource. The tone can be specified by
name (from indications.conf) or by a tone pattern. In addition, tonezone can
be specified in the URI (by appending ;tonezone=<zone>). Tones must be
stopped manually in order for a stasis control to move on from playback of
the tone. Tones may be paused, resumed, restarted, and stopped. They may
not be rewound or fast forwarded (tones can't be controlled in a way that
lets you skip around from note to note and pausing and resuming will also
restart the tone from the beginning). Tests are currently in development
for this feature (https://reviewboard.asterisk.org/r/3428/).

(closes issue ASTERISK-23433)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/3427/
........

Merged revisions 412535 from http://svn.asterisk.org/svn/asterisk/branches/12


git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@412536 65c4cc65-6c06-0410-ace0-fbb531ad65f3

This patch is a continuation of https://reviewboard.asterisk.org/r/3349/,
committed in r412303.

It resolves a finding oej had that the phone-context be available in a
channel variable separate from SIPDOMAIN. This patch adds that variable as
SIPURIPHONECONTEXT. It also allows a local number (or global number specified
in the TEL URI) to be used to look up as a peer.

(issue ASTERISK-17179)

Review: https://reviewboard.asterisk.org/r/3349/


git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@412467 65c4cc65-6c06-0410-ace0-fbb531ad65f3

Add an option to enable a periodic beep to be played into a call if it
is being recorded.  If enabled, it uses the PERIODIC_HOOK() function
internally to play the 'beep' prompt into the call at a specified
interval.  This option is provided for both Monitor() and
MixMonitor().

Review: https://reviewboard.asterisk.org/r/3424/


git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@412427 65c4cc65-6c06-0410-ace0-fbb531ad65f3

This patch adds support for handling TEL URIs in inbound INVITE requests.
This includes the Request URI and the From URI. The number specified in
the Request URI will be the destination of the inbound channel in the dialplan.
The phone-context specified in the Request URI will be stored in the
TELPHONECONTEXT channel variable.

Review: https://reviewboard.asterisk.org/r/3349

ASTERISK-17179 #close
Reported by: Geert Van Pamel
Tested by: Geert Van Pamel
patches:
  asterisk-12.0.0-chan_sip-RFC3966_patch.txt uploaded by Geert Van Pamel (License 6140)
  asterisk-12.0.0-reqresp_parser-RFC3966_patch.txt uploaded by Geert Van Pamel (License 6140)



git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@412292 65c4cc65-6c06-0410-ace0-fbb531ad65f3

This fixes a parsing error that occurred during the processing of
the AMI action. The error did not result in MixMonitor itself
misbehaving, but it could result in the AMI response not giving
correct information back.

The new header allows for one to specify a post-process command
to run when recording finishes. Previously, in order to do this,
the post-process command would have to be placed at the end of
the Options: header. 

Patches: mixmonitor_command_2.patch by jhardin (License #6512)
........

Merged revisions 412048 from http://svn.asterisk.org/svn/asterisk/branches/12


git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@412050 65c4cc65-6c06-0410-ace0-fbb531ad65f3

This commit introduces a new dialplan function, PERIODIC_HOOK().
It allows you run to a dialplan hook on a channel periodically.  The
original use case that inspired this was the ability to play a beep
periodically into a call being recorded.  The implementation is much
more generic though and could be used for many other things.

The implementation makes heavy use of existing Asterisk components.
It uses a combination of Local channels and ChanSpy() to run some
custom dialplan and inject any audio it generates into an active call.

The other important bit of the implementation is how it figures out
when to trigger the beep playback.  This implementation uses the
audiohook API, even though it's not actually touching the audio in any
way.  It's a convenient way to get a callback and check if it's time
to kick off another beep.  It would be nice if this was timer event
based instead of polling based, but unfortunately I don't see a way to
do it that won't interfere with other things.

Review: https://reviewboard.asterisk.org/r/3362/



git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@411768 65c4cc65-6c06-0410-ace0-fbb531ad65f3

This patch adds the following:
(1) A new module, res_hep, which implements a generic packet capture agent for
the Homer Encapsulation Protocol (HEP) version 3. Note that this code is based
on a patch provided by Alexandr Dubovikov; I basically just wrapped it up,
added configuration via the configuration framework, and threw in a
taskprocessor.
(2) A new module, res_hep_pjsip, which forwards all SIP message traffic that
passes through the res_pjsip stack over to res_hep for encapsulation and
transmission to a HEPv3 capture server.

Much thanks to Alexandr for his Asterisk patch for this code and for a *lot*
of patience waiting for me to port it to 12/trunk. Due to some dithering on
my part, this has taken the better part of a year to port forward (I still
blame CDRs for the delay).

ASTERISK-23557 #close

Review: https://reviewboard.asterisk.org/r/3207/
........

Merged revisions 411534 from http://svn.asterisk.org/svn/asterisk/branches/12


git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@411556 65c4cc65-6c06-0410-ace0-fbb531ad65f3

This patch does the following:
 * It updates the AMI version to 2.2.0 to indicate backwards compatible
   changes have been made since the last release
 * It updates the ARI version to 1.2.0 to indicate backwards compatible
   changes have been made since the last release
 * It updates the UPGRADE/CHANGES files with changes that were not
   mentioned
........

Merged revisions 411529 from http://svn.asterisk.org/svn/asterisk/branches/12


git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@411530 65c4cc65-6c06-0410-ace0-fbb531ad65f3

This change turns the bridge type field into a comma separated list of attributes.
These attributes include: mixing, holding, dtmf_events, and proxy_media. By setting
the various attributes a user can control the type of bridge created with the
behavior they need for their application.

(closes issue ASTERISK-23437)
Reported by: Matt Jordan

Review: https://reviewboard.asterisk.org/r/3359/
........

Merged revisions 410904 from http://svn.asterisk.org/svn/asterisk/branches/12


git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@410905 65c4cc65-6c06-0410-ace0-fbb531ad65f3

This change enables DNS client support within PJSIP. System
nameservers are automatically discovered using res_init or
res_ninit. If this fails then PJSIP will resort to using
gethostbyname for resolution.

By enabling this support we gain SRV support, failover, and
weight support.

(closes issue ASTERISK-23435)
Reported by: Matt Jordan

Review: https://reviewboard.asterisk.org/r/3343/
........

Merged revisions 410795 from http://svn.asterisk.org/svn/asterisk/branches/12


git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@410796 65c4cc65-6c06-0410-ace0-fbb531ad65f3

Note the new features provided by uniqueid in the
CHANGES file.

(issue ASTERISK-23120)
Review: https://reviewboard.asterisk.org/r/3316/
........

Merged revisions 410588 from http://svn.asterisk.org/svn/asterisk/branches/12


git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@410589 65c4cc65-6c06-0410-ace0-fbb531ad65f3

(closes issue ASTERISK-23235)
Reported by: George Joseph
Review: https://reviewboard.asterisk.org/r/3324/
........

Merged revisions 410574 from http://svn.asterisk.org/svn/asterisk/branches/12


git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@410575 65c4cc65-6c06-0410-ace0-fbb531ad65f3

This patch creates the AST_SORCERY dialplan function which allows someone to
retrieve any value from a sorcery-based config file.  It's similar to 
AST_CONFIG.

The creation of the function itself was fairly straightforward but it required
changes to the underlying sorcery infrastructure that rippled into individual
sorcery objects.  The changes stemmed from inconsistencies in how sorcery
created ast_variable objectsets from sorcery objects and the inconsistency
in how individual objects used that feature especially when it came to
parameters that can be specified multiple times like contact in aor and match
in identify.  You can read more here...
http://lists.digium.com/pipermail/asterisk-dev/2014-February/065202.html

So, what this patch does, besides actually creating the AST_SORCERY function,
is the following...

* Creates ast_variable_list_append which is a helper to append one ast_variable
  list to another.
* Modifies the ast_sorcery_object_field_register functions to accept the
  already-defined sorcery_fields_handler callback.
* Modifies ast_sorcery_objectset_create to accept a parameter indicating return
  type preference...a single ast_variable with all values concatenated or an
  ast_variable list with multiple entries.  Also fixed a few bugs.
* Modifies individual sorcery object implementations to use the new function
  definition of the ast_sorcery_object_field_register functions.
* Modifies location.c and res_pjsip_endpoint_identifier_ip.c to implement
  sorcery_fields_handler handlers so they return multiple occurrences as an
  ast_variable_list.
* Added a whole bunch of tests to test_sorcery.

(closes issue ASTERISK-22537)
Review: http://reviewboard.asterisk.org/r/3254/


git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@410042 65c4cc65-6c06-0410-ace0-fbb531ad65f3

This change adds a target_uri field to the live recording object. It
contains the URI of what is being recorded.

(closes issue ASTERISK-23258)
Reported by: Ben Merrills

Review: https://reviewboard.asterisk.org/r/3299/
........

Merged revisions 410025 from http://svn.asterisk.org/svn/asterisk/branches/12


git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@410027 65c4cc65-6c06-0410-ace0-fbb531ad65f3

This adds the ability to dynamically add and remove logger channels
from Asterisk via the CLI.

(closes issue AST-1150)
Review: https://reviewboard.asterisk.org/r/3185/


git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@407989 65c4cc65-6c06-0410-ace0-fbb531ad65f3

This patch adds documentation for the Security Events that are emited over
AMI. It also notes these events in the UPGRADE/CHANGES file.
........

Merged revisions 407589 from http://svn.asterisk.org/svn/asterisk/branches/12


git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@407602 65c4cc65-6c06-0410-ace0-fbb531ad65f3

The changes log was written with language that was a little too internal
Asterisk specific, so it's been changed to be more in the frame of reference
of an ARI user. Also, previously the AMI event changes were omitted from the
change log as well as the ability to include a bridge name in the ARI post
bridges command.
........

Merged revisions 407461 from http://svn.asterisk.org/svn/asterisk/branches/12


git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@407462 65c4cc65-6c06-0410-ace0-fbb531ad65f3