When OUTPUTDIR is set to another directory and the
--delete-results-after is set, the resulting txt files are
not deleted.

ASTERISK-29794 #close

Change-Id: I1c0071f6809a1e3f5cfc455d6eb08378bc0d7286

In developer mode, use internal documentation as well.
This should produce no warnings. Fix yours!

In noisy mode, output all possible warnings of Doxygen.
This creates zillion of warnings. Double-check your current module!

Any warnings are in the file './doxygen.log'. Beside that, this change
avoids deprecated parameters because the configuration file for Doxygen
contains only those parameters which differ from the default. This
avoids the need to update the file on each run. Furthermore, it adds
AST_VECTOR to be expanded. Finally, the default name for that file is
Doxyfile. Therefore, let us use that!

ASTERISK-26991
ASTERISK-20259

Change-Id: I4129092a199d5e24c319a09cd088614b121015af

Correct typos of the following word families:

standard
increase
comments
valgrind
promiscuous
editing
libtonezone
storage
aggressive
whitespace
russellbryant
consecutive
peternixon

ASTERISK-29714

Change-Id: I9cafbf41b579c9c0c84c81719d2c4f900beec245

The search for a running asterisk when --running is used
has been greatly simplified and in the event it doesn't
work, you can now specify a pid to use on the command
line with --pid.

The search for asterisk modules when --tarball-coredumps
is used has been enhanced to have a better chance of finding
them and in the event it doesn't work, you can now specify
--libdir on the command line to indicate the library directory
where they were installed.

The DATEFORMAT variable was renamed to DATEOPTS and is now
passed to the 'date' utility rather than running DATEFORMAT
as a command.

The coredump and output files are now renamed with DATEOPTS.
This can be disabled by specifying --no-rename.

Several confusing and conflicting options were removed:
--append-coredumps
--conffile
--no-default-search
--tarball-uniqueid

The script was re-structured to make it easier for follow.

Change-Id: I674be64bdde3ef310b6a551d4911c3b600ffee59

In res_pjsip_sdp_rtp, the bind_rtp_to_media_address option and the
fallback use of the transport's bind address solve problems sending
media on systems that cannot send ipv4 packets on ipv6 sockets, and
certain other situations. This change extends both of these behaviors
to UDPTL sessions as well in res_pjsip_t38, to fix fax-specific
problems on these systems, introducing a new option
endpoint/t38_bind_udptl_to_media_address.

ASTERISK-29402

Change-Id: I87220c0e9cdd2fe9d156846cb906debe08c63557

The behavior of max_contacts and remove_existing are connected.  If
remove_existing is enabled, the soonest expiring contacts are removed.
This may occur when there is an unavailable contact.  Similarly,
when remove_existing is not enabled, registrations from good
endpoints are rejected in favor of retaining unavailable contacts.

This commit adds a new AOR option remove_unavailable, and the effect
of this setting will depend on remove_existing.  If remove_existing
is set to no, we will still remove unavailable contacts when they
exceed max_contacts, if there are any. If remove_existing is set to
yes, we will prioritize the removal of unavailable contacts before
those that are expiring soonest.

ASTERISK-29525

Change-Id: Ia2711b08f2b4d1177411b1be23e970d7fdff5784

Adds the "auto" case which is valid with
both chan_sip dtmfmode and chan_pjsip's
dtmf_mode, adds subscribecontext to
subscribe_context conversion, and accounts
for cipher = ALL being invalid.

ASTERISK-29459

Change-Id: Ie27d6606efad3591038000e5f3c34fa94730f6f2

ASTERISK-27477 #close

Change-Id: I68f6715bba92a525149e35d142a49377a34a1193

Some versions of SVN seemingly don't follow the redirect
to https.

Change-Id: Ia7c76c18cb620bcf56f08e1211a7d80d321fe253

ASTERISK-28356 #close

Change-Id: I53a1bfdd3113d620bea88349019173a2f3f0ae39

With newer version of linux /var/run/ is a symlink to /run/ that has
been turned into tmpfs.

Added note that if asterisk has to bind to a specific IP that
systemd has to wait until the network is up.

Added note on how to make sure that the environment variable
HOSTNAME is included.

ASTERISK-29216
Reported by: Mark Petersen
Tested by: Mark Petersen

Change-Id: Ib3e560655befd3e99eec743687144f5569533379

* Wildcards in #includes are now properly expanded

* Implement operators for Section class to allow sorting

ASTERISK-29142 #close

Change-Id: I9b9cd95f4cbe5c24506b75d17173c5aa1a83e5df

Ubuntu 20.10 does not come with GMime 2.6. Ubuntu 16.04 LTS does not
come with GMime 3.0. aptitude ignores any missing package. Therefore,
it installs the correct package(s). However, in Ubuntu 18.04 LTS and
Ubuntu 20.04 LTS, both versions are installed alongside although only
one is really needed.

Change-Id: Ic58aa9f2e131d94671f286f17dbd61e1ccbabcb7

Implemention of History-Info capable of interworking with Diversion
Header following RFC7544

ASTERISK-29027 #close

Change-Id: I2296369582d4b295c5ea1e60bec391dd1d318fa6

Currently, the ps_contacts table's reg_server column in realtime database type is varchar(20).
This is fine for normal cases, but if the hostname is longer than 20, it returns error and then
failed to register the contact address of the peer.

Normally, 20 characters limitation for the hostname is fine, but with the cloud env.
So, increased the size to 255.

ASTERISK-29056

Change-Id: Iac52c8c35030303cfa551bb39f410b33bffc507d

If you run ast_coredumper --tarball-coredumps in the same directory
as the actual coredump, tar can fail because the link to the
actual coredump becomes recursive.  The resulting tarball will
have everything _except_ the coredump (which is usually what
you need)

There's also an issue that the directory name in the tarball
is the same as the coredump so if you extract the tarball the
directory it creates will overwrite the coredump.

So:

 * Made the link to the coredump use the absolute path to the
   file instead of a relative one.  This prevents the recursive
   link and allows tar to add the coredump.

 * The tarballed directory is now named <coredump>.output instead
   of just <coredump> so if you expand the tarball it won't
   overwrite the coredump.

Change-Id: I8b3eeb26e09a577c702ff966924bb0a2f9a759ea

With the latest Linux, 'ifconfig' is not installed on default anymore.
Furthermore, the output of the current net-tools 'ifconfig' changed.
Therefore, parsing failed. This update uses 'ip addr show' instead.
Finally, the service for the external IP changed.

Change-Id: I9b1a7c3f457e3553b50a3e9a55524e40d70245a0

This change renames the codec preference endpoint options.
incoming_offer_codec_prefs becomes codec_prefs_incoming_offer
to keep the options together when showing an endpoint.

Change-Id: I6202965b4723777f22a83afcbbafcdafb1d11c8d

Added a new configuration option for PJSIP endpoints - stir_shaken. If
set to yes, then STIR/SHAKEN support will be added to inbound and
outbound INVITEs. The default is no. Alembic has been updated to include
this option.

Previously the dialplan function was not trimming the whitespace from
the parameters it recieved. Now it does.

Also added a conditional that, when TEST_FRAMEWORK is enabled, the
timestamp in the identity header will be overlooked. This is just for
testing, since the testsuite will rely on a SIPp scenario with a preset
identity header to trigger the MISMATCH result.

Change-Id: I43d67f1489b8c1c5729ed3ca8d71e35ddf438df1

This commit adds the endpoint options required to control
Advanced Codec Negotiation.

incoming_offer_codec_prefs
outgoing_offer_codec_prefs
incoming_answer_codec_prefs
outgoing_answer_codec_prefs

The documentation may need tweaking and some additional edits
added, especially for the "answer" prefs.  That'll be handled
when things finalize.

This commit is safe to merge as it doens't alter any existing
functionality nor does it alter the previous codec negotiation
work which may now be obsolete.

Change-Id: I920ba925d7dd36430dfd2ebd9d82d23f123d0e11

Currently when the pjsip making an outgoing request, it keep adding the
rport parameter in a request message as a default.

This causes unexpected rport handle at the other end.

Added option for disable this behaviour in the pjsip.conf.

This is a system option, but working as a gloabl option.

ASTERISK-28959

Change-Id: I9596675e52a742774738b5aad5d1fec32f477abc

works automatically; see Mantis 7047 (now ASTERISK-6863)

Change-Id: I27d2c109180bd857b6757fd532de48eddb78aee6

The Python/C API is used only if the Test Framework was enabled in Asterisk
'make menuselect'. The Test Framework is available only if the Developer Mode
was enabled in Asterisk './configure --enable-dev-mode'. And that Python/C API
is used only if the PJProject was found and not disabled in Asterisk; the user
did not go for './configure --without-pjproject'.

Furthermore, because version 2 of that Python/C API is required (currently) and
because some platforms do not offer a generic version 2, the script searches
for 2.7 explicitly as well.

To avoid version mismatch between the Python/C API and the Python environment,
the script searches for the latter in the same versions, in the same the order
as well. Because this Python/C API is just for (some) Asterisk contributors,
the script also goes for the Python 3 environment as a last resort for all
other Asterisk users. This allows 'make full' even on minimal installations of
Ubuntu 18.04 LTS and newer.

Because the Python/C API is Asterisk contributor specific, the Python packages
are removed from the script './contrib/scripts/install_prereq' as this script
is intended for Asterisk users. Asterisk contributors have to install much more
packages in any case, like:
sudo apt install autoconf automake git git-review python2.7-dev

ASTERISK-28824
ASTERISK-27717

Change-Id: Id46d357e18869f64dcc217b8fdba821b63eeb876

This patch makes it so ast_coredumper now outputs the following information to
a *-info.txt file when processing a core file:

  asterisk version and "built by" string
  BUILD_OPTS
  system start, and last reloaded date/time
  taskprocessor list
  equivalent of "bridge show all"
  equivalent of "core show channels verbose"

Also a slight modification was made when trying to obtain the pid(s) of a
running Asterisk. If it fails to retrieve any it now reports an error.

Change-Id: I54f35c19ab69b8f8dc78cc933c3fb7c99cef346b

The default size in release branches will be 1024 but we'll use 2048 in master.

ASTERISK~28750

Change-Id: I435cea18bdd58824ed2b55259575c7ec7133842a

Currently aptitude is installed using interactive mode. This patch
changes this to use the non-interactive mode as it can block
automatic dependencies installation, ex: CI, Docker build.

ASTERISK-28726 #close

Change-Id: I271ee00d230513a6f044810351a32d83b2181133

Fix use of frame-level wildcard usage in suppression file.

ASTERISK-27243 #close
Reported-by: Richard Kenner

Change-Id: I1c0c64c5f305d2c9aa124e11f1f64a2eec52dc51

ASTERISK-28664 #close

Change-Id: I6c28b1002fd7075ae0ed36f026f8c1855c9418a6

Change-Id: I35b928a6251f9da9a1742b2cd14c63a00c3d0f0c

Allow the list of files to be played to be provided explicitly in the
music class's configuration. The primary driver for this change is to
allow URLs to be used for MoH.

Change-Id: I9f43b80b43880980b18b2bee26ec09429d0b92fa

Change-Id: Ica182a891743017ff3cda16de3d95335fffd9a91

Added a new PJSIP global setting called norefersub.
Default is true to keep support working as before.

res_pjsip_refer:  Configures PJSIP norefersub capability accordingly.

Checks the PJSIP global setting value.
If it is true (default) it adds the norefersub capability to PJSIP.
If it is false (disabled) it does not add the norefersub capability
to PJSIP.

This is useful for Cisco switches that do not follow RFC4488.

ASTERISK-28375 #close
Reported-by: Dan Cropp

Change-Id: I0b1c28ebc905d881f4a16e752715487a688b30e9

When trying to upgrade using alembic, a couple different errors kept
popping up that prevented the upgrade. An additional parameter was
needed when changing the schema for mwi_subscribe_replaces_unsolicited
from an integer to an enum. When changing from a string to an enum, the
type needed to be cast for postgresql. The other issue was a parameter
being used during column creation that did not exist.

After fixing the upgrade process, it revealed errors with the downgrade
process. One was a variable not being defined in the downgrade function,
and the other was tables not existing when using MySQL. This was due to
a context check that should have encompassed MySQL, but in the end was
not doing so.

Change-Id: Ib4d70cf3ce5080023a50be496272a777b55d6c8e

When variable ALTCONF is defined, the command start prints the message
"Unable to open specified master config file '"/etc/asterisk/asteris..."
and use default configurations.

ASTERISK-28332

Change-Id: I7595e582a0ee2c1051ea35435e247e27906957ef

chan_sip will always ignore 183 responses that do not contain SDP
however, chan_pjsip will currently always translate it into a
183 with SDP.  This new flag allows chan_pjsip to have the same
behavior as chan_sip.

ASTERISK-28322 #close

Change-Id: If81cfaa17c11b6ac703e3d71696f259d86c6be4a

In Asterisk configuration, a multiline comment starts with ;-- as long as it is
not followed by another dash (i.e. ;--- is not a multiline comment).

ASTERISK-28323 #close

Change-Id: I32dc38e0fac01d3c0805d27d35d2365a7c37ca72

To prevent one subsystem's taskprocessors from causing others
to stall, new capabilities have been added to taskprocessors.

* Any taskprocessor name that has a '/' will have the part
  before the '/' saved as its "subsystem".
  Examples:
  "sorcery/acl-0000006a" and "sorcery/aor-00000019"
  will be grouped to subsystem "sorcery".
  "pjsip/distributor-00000025" and "pjsip/distributor-00000026"
  will bn grouped to subsystem "pjsip".
  Taskprocessors with no '/' have an empty subsystem.

* When a taskprocessor enters high-water alert status and it
  has a non-empty subsystem, the subsystem alert count will
  be incremented.

* When a taskprocessor leaves high-water alert status and it
  has a non-empty subsystem, the subsystem alert count will be
  decremented.

* A new api ast_taskprocessor_get_subsystem_alert() has been
  added that returns the number of taskprocessors in alert for
  the subsystem.

* A new CLI command "core show taskprocessor alerted subsystems"
  has been added.

* A new unit test was addded.

REMINDER: The taskprocessor code itself doesn't take any action
based on high-water alerts or overloading.  It's up to taskprocessor
users to check and take action themselves.  Currently only the pjsip
distributor does this.

* A new pjsip/global option "taskprocessor_overload_trigger"
  has been added that allows the user to select the trigger
  mechanism the distributor uses to pause accepting new requests.
  "none": Don't pause on any overload condition.
  "global": Pause on ANY taskprocessor overload (the default and
  current behavior)
  "pjsip_only": Pause only on pjsip taskprocessor overloads.

* The core pjsip pool was renamed from "SIP" to "pjsip" so it can
  be properly grouped into the "pjsip" subsystem.

* stasis taskprocessor names were changed to "stasis" as the
  subsystem.

* Sorcery core taskprocessor names were changed to "sorcery" to
  match the object taskprocessors.

Change-Id: I8c19068bb2fc26610a9f0b8624bdf577a04fcd56

The commit I2f97ebfa79969a36a97bb7b9afd5b6268cf1a07d removed sending out
the ContactStatus AMI event when a contact is updated.
Thist change broke things which rely on old behavior.

This patch adds a new PJSIP global configuration option
'send_contact_status_on_update_registration' to be able to preserve old
ContactStatus behavior.
By default new behavior, i.e. the ContactStatus event will not be sent when a
device refreshes its registration.

Change-Id: I706adf7584e7077eb6bde6d9799ca408bc82ce46

In order to get a dump of the running process, we need to find the
pid of the main asterisk process.  This can be tricky if there are
also instances of "asterisk -r" running or if an alternate location
for asterisk.conf was specified on the command line with the -C
option that also specified an alternation location for the pid file.

So now...

1. We find the asterisk executable with "which" or the --asterisk-bin
   command line option.
2. If there's only 1 process with an executable path that matches,
   we use that pid.  If not...
3. We try "<asterisk-bin> -rx 'core show settings'" and parse the
   output to find the pidfile, then read that for the pid.  If that
   didn't work...
4. We get a list of all the pids matching <asterisk-bin> and look
   in /proc/<pid>/cmdline for a -C argument and retry the "core show
   settings" using the same -C option.  We can't parse the output
   of "ps" to get the -C path because it may contain spaces.  The
   contents of /proc/<pid>/cmdline are delimited by NULLs.  For BSDs
   we may have to mount /proc first. :(

ASTERISK-28221
Reported by: Andrew Nagy

Change-Id: I8aa1f3f912f949df2b5348908803c636bde1d57c

Change-Id: I413f1583c797fb79651786cd8d0b003599f8ed10