There are 3 separate changes here but they are all closely related:

* Only try to set matchfield attributes on 'field' nodes

* We need to adjust how we treat the category pointer based on the
  value of the category_match, to avoid memory corruption. We now
  generate a regex-like string when match types other than
  ACO_WHITELIST and ACO_BLACKLIST are used.

* Switch app_agent_pool from ACO_BLACKLIST_ARRAY to
  ACO_BLACKLIST_EXACT since we only have one category we need to
  ignore, not two.

ASTERISK-29614 #close

Change-Id: I7be7bdb1bb9814f942bc6bb4fdd0a55a7b7efe1e

Allows for the digit # to be read as a digit,
just like any other DTMF digit, as opposed to
forcing it to be used as an end of input
indicator. The default behavior remains
unchanged.

ASTERISK-18454 #close

Change-Id: I3033432adb9d296ad227e76b540b8b4a2417665b

Prevents reloads of app_queue from also resetting
queue statistics.

Also preserves individual queue agent statistics
if we're just reloading members.

ASTERISK-28701

Change-Id: Ib5d4cdec175e44de38ef0f6ede4a7701751766f1

The Milliwatt application uses incorrect tone timings
that cause it to play the 1004 Hz tone constantly.

This adds an option to enable the correct timing
behavior, so that the Milliwatt application can
be used for milliwatt test lines. The default behavior
remains unchanged for compatability reasons, even
though it is incorrect.

ASTERISK-29575 #close

Change-Id: I73ccc6c6fcaa31931c6fff3b85ad1805b2ce9d8c

Previously, the Morsecode application only supported international
Morse code. This adds support for American Morse code and adds an
option to configure the frequency used in off intervals.

Additionally, the application checks for hangup between tones
to prevent application execution from continuing after hangup.

ASTERISK-29541

Change-Id: I172431a2e18e6527d577e74adfb05b154cba7bd4

A list of codecs to use for dialplan-originated calls can
now be specified in Originate, similar to the ability
in call files and the manager action.

Additionally, we now default to just using the slin codec
for originated calls, rather than all the slin* codecs up
through slin192, which has been known to cause issues
and inconsistencies from AMI and call file behavior.

ASTERISK-29543

Change-Id: I96a1aeb83d54b635b7a51e1b4680f03791622883

ASTERISK-29591

Change-Id: I021d37b729631d40f84e35bb21e2893777be1858

ASTERISK-29590

Change-Id: I87cf0f536b77d222c8eda003376ac47fae86ed43

ASTERISK-29589

Change-Id: I8057eb2ca1ca4c3b27ed2fe04bea10e9cb551cdd

ASTERISK-29588

Change-Id: If846d40b37c5b646bcd7326111db280529a5971b

ASTERISK-29587

Change-Id: I038237bbb56b1161d7d5e20cda11ed32e13d3ca2

ASTERISK-29586

Change-Id: I1e0a4535135b00938b609fe0ccba9bbddbac93ad

app_meetme is deprecated in 19, to be removed in 21.
app_osplookup is deprecated in 19, to be removed in 21.
chan_alsa is deprecated in 19, to be removed in 21.
chan_mgcp is deprecated in 19, to be removed in 21.
chan_skinny is deprecated in 19, to be removed in 21.
res_pktccops is deprecated in 19, to be removed in 21.
app_macro was deprecated in 16, to be removed in 21.
chan_sip was deprecated in 17, to be removed in 21.
res_monitor was deprecated in 16, to be removed in 21.

ASTERISK-29548
ASTERISK-29549
ASTERISK-29550
ASTERISK-29551
ASTERISK-29552
ASTERISK-29553
ASTERISK-29558
ASTERISK-29567
ASTERISK-29572

Change-Id: Ic3bee31a10d42c4b3bbc913d893f7b2a28a27131

Allows multiple files comprising an agent announcement
to be played by separating on the ampersand, similar
to the multi-file support in other Asterisk applications.

ASTERISK-29528

Change-Id: Iec600d8cd5ba14aa1e4e37f906accb356cd7891a

Adds application to asynchronously collect digits
dialed on a channel in the TX or RX direction
using a framehook and stores them in a specified
variable, up to a configurable number of digits.

ASTERISK-29477

Change-Id: I51aa93fc9507f7636ac44806c4420ce690423e6f

Change-Id: I40c6514e1843e320f3cbe0b2c70d4a98c0e35b9c

Adds an application to reload modules
from within the dialplan.

ASTERISK-29454

Change-Id: Ic8ab025d8b38dd525b872b41c465c999c5810774

While several applications exist to wait for
a certain event to occur, none allow waiting
for any generic expression to become true.
This application allows for waiting for a condition
to become true, with configurable timeout and
checking interval.

ASTERISK-29444

Change-Id: I08adf2824b8bc63405778cf355963b5005612f41

Hitherto, the A option has made it possible to play
audio upon answer to the called party only. This option
is expanded to allow for playback of an audio file to
the caller instead of or in addition to the audio
played to the answerer.

ASTERISK-29442

Change-Id: If6eed3ff5c341dc8c588c8210987f2571e891e5e

Caller ID can now be set on the called channel and
Variables can now be set on the destination
using the Originate application, just as
they can be currently using call files
or the Manager Action.

ASTERISK-29450

Change-Id: Ia64cfe97d2792bcbf4775b3126cad662922a8b66

Adds a new ConfKick() application, which may
be used to kick a specific channel, all channels,
or all non-admin channels from a specified
conference bridge, similar to existing CLI and
AMI commands.

ASTERISK-29446

Change-Id: I5d96b683880bfdd27b2ab1c3f2e897c5046ded9b

A new user option, answer_channel, adds the capability to
prevent answering the channel if it hasn't already been
answered yet.

ASTERISK-29440

Change-Id: I26642729d0345f178c7b8045506605c8402de54b

Hitherto, VoiceMail() played a non-customizable beep tone to indicate
the caller could leave a message. In some cases, the beep may not
be desired, or a different tone may be desired.

To increase flexibility, a new option allows customization of the tone.
If the t option is specified, the default beep will be overridden.
Supplying an argument will cause it to use the specified file for the tone,
and omitting it will cause it to skip the beep altogether. If the option
is not used, the default behavior persists.

ASTERISK-29349

Change-Id: I1c439c0011497e28a28067fc1cf1e654c8843280

Also removed the sample documentation, and some oddly-placed
documentation about the timeout argument to the Queue() application
itself. There is a large section on the timeout behavior below.

ASTERISK-26614 #close

Change-Id: I8f84e8304b50305b7c4cba2d9787a5d77c3a6217

ASTERISK-27542 #close

Change-Id: If0b9719380a25533d2aed1053cff845dc3a4854a

If a queue member was updated with the same status multiple
times each time a QueueMemberStatus event would be sent
which would be a duplicate of the previous.

This change makes it so that the QueueMemberStatus event is
only sent if the status actually changes.

ASTERISK-29355

Change-Id: I580c60d992a0a8f2bea8b91c868771b3b490d116

This change embeds the MODULEINFO block of modules
into the core XML documentation. This provides a shared
mechanism for use by both menuselect and Asterisk for
information and a definitive source of truth.

ASTERISK-29335

Change-Id: Ifbfd5c700049cf320a3e45351ac65dd89bc99d90

Some modules have a different support level documented in their
MODULEINFO XML and Asterisk module definition. This change
brings the two in sync for the modules which were not matching.

ASTERISK-29336

Change-Id: If2f819103d4a271e2e0624ef4db365e897fa3d35

ASTERISK-29329 #close

Change-Id: Ic58e7a17f1ff3f785a5b21dced88682581149601

ASTERISK-16799 #close

Change-Id: I40367b0d6dbf66a39721bde060c8b2d734a61cf4

Queue members using dialplan hints as a state interface must handle
INUSE+RINGING hint as RINGINUSE devstate, and INUSE + ONHOLD as INUSE.

ASTERISK-28369

Change-Id: I127e06943d4b4f1afc518f9e396de77449992b9f

ASTERISK-29244

Change-Id: I1862d58264c2c8b5d8983272cb29734b184d67c5

Change-Id: I350939f2220f9e5d44ddf4c8d9a4c99fde4d169a

When a Transfer/REFER is executed, TRANSFERSTATUSPROTOCOL variable is
0 when no protocl specific error
SIP example of failure, 3xx-6xx for the SIP error code received

This allows applications to perform actions based on the failure
reason.

ASTERISK-29252 #close
Reported-by: Dan Cropp

Change-Id: Ia6a94784b4925628af122409cdd733c9f29abfc4

launch_monitor_thread is responsible for creating and initializing
the mixmonitor, and dependent data structures. There was one off
nominal path after the datastore gets created that triggers when
the channel being monitored is hung up prior to monitor starting
itself.

If this happened the monitor thread would not "launch", and the
mixmonitor object and associated objects are freed, including the
underlying datastore data object. However, the datastore itself was
not removed from the channel, so when the channel eventually gets
destroyed it tries to access the previously freed datastore data
and crashes.

This patch removes and frees datastore object itself from the channel
before freeing the mixmonitor object thus ensuring the channel does
not call it when destroyed.

ASTERISK-28947 #close

Change-Id: Id4f9e958956d62473ed5ff06c98ae3436e839ff8

ASTERISK-28992 #close

Change-Id: Ia7d608924036139ee2520b840d077762d02668d0

The documentation in the wiki says there should be spyee-channel
information elements in the ChanSpyStop AMI event.

    https://wiki.asterisk.org/wiki/x/Xc5uAg

However, this is not the case in Asterisk <= 16.10.0 Version. We're
using these Spyee* arguments since Asterisk 11.x, so these arguments
vanished in Asterisk 12 or higher.

For maximum compatibility, we still send the ChanSpyStop event even if
we are not able to find any 'Spyee' information.

ASTERISK-28883 #close

Change-Id: I81ce397a3fd614c094d043ffe5b1b1d76188835f

When using this option, answering the channel is deferred until
all prompts/greetings have been played and the caller is about
to leave their message.

ASTERISK-29118 #close

Change-Id: I41b9f0428783c0bd697c8c994f906d1e75ce9ddb

Operations that update queues when shared_lastcall is set lock the
queue in question, then have to lock the queues container to find the
other queues with the same member. On the other hand, __queues_show
(which is called by both the CLI and AMI) does the reverse. It locks
the queues container, then iterates over the queues locking each in
turn to display them.  This creates a deadlock.

* Moved queue print logic from __queues_show to a separate function
  that can be called for a single queue.

* Updated __queues_show so it doesn't need to lock or traverse
  the queues container to show a single queue.

* Updated __queues_show to snap a copy of the queues container and iterate
  over that instead of locking the queues container and iterating over
  it while locked.  This prevents us from having to hold both the
  container lock and the queue locks at the same time.  This also
  allows us to sort the queue entries.

ASTERISK-29155

Change-Id: I78d4dc36728c2d7bc187b97d82673fc77f2bcf41

ASTERISK-29144

Change-Id: I2a72c072083b4492a223c6f9d73d21f4f424db62