The enum values for ast_strsep_flags includes
AST_STRSEP_STRIP. However, some comments reference
AST_SEP_STRIP, which doesn't exist. This fixes
these comments to use the correct value.

ASTERISK-29800 #close

Change-Id: If7bbd0c0e6226a211d25ddf9d1629347e2674943

Currently, variable substitution involving dialplan
extensions is quite clunky since it entails obtaining
the current dialplan location, backing it up, storing
the desired variables for substitution on the channel,
performing substitution, then restoring the original
location.

In addition to being clunky, things could also go wrong
if an async goto were to occur and change the dialplan
location during a substitution.

Fundamentally, there's no reason it needs to be done this
way, so new API is added to allow for directly passing in
the dialplan location for the purposes of variable
substitution so we don't need to mess with the channel
information anymore. Existing API is not changed.

ASTERISK-29745 #close

Change-Id: I23273bf27fa0efb64a606eebf9aa8e2f41a065e4

Adds tech-agnostic support for MF signaling by adding
MF sender and receiver applications as well as Dial
integration.

ASTERISK-29496-mf #do-not-close

Change-Id: I61962b359b8ec4cfd05df877ddf9f5b8f71927a4

Change-Id: I5b5cf9c9cbbe00ba8b379a8d162ac67445d39016

These are the remaining issues found in /res.

ASTERISK-29761

Change-Id: I572e6019c422780dde5ce8448b6c85c77af6046d

ASTERISK-29763

Change-Id: Ib8359e3590a9109eb04a5376559d040e5e21867e

ASTERISK-29779

Change-Id: If338163488498f65fa7248b60e80299c0a928e4b

Since Doxygen 1.8.16, a special comment block is required. Otherwise
(pure C comment), the group command is ignored. Additionally, several
unbalanced group commands were fixed.

ASTERISK-29732

Change-Id: I4687857b9d56e6f44fd440b73af156691660202e

Refactors generic functions used for email generation
into utils.c so that they can be used by multiple
modules, including app_voicemail and app_minivm,
to avoid code duplication.

ASTERISK-29715 #close

Change-Id: I1de0ed3483623e9599711129edc817c45ad237ee

ASTERISK-29773

Change-Id: Ica93160d9158cc0e80c5fda829b80d1b49a6b9b9

ASTERISK-29765

Change-Id: I654ba0debe8351038d4433716434a09370f04c9d

This avoids a few long-name overflows, at the cost of less instructive
names in the case of C++ (specifically overloaded functions and class
methods).  This in turn is offset against the fact that we're logging
the filename and line numbers in any case.

Change-Id: I54101a0bb5f8cb9ef63ec12c5e0d4c8edafff9ed
Signed-off-by: Jaco Kroon <jaco@uls.co.za>

ASTERISK-29754

Change-Id: Ia09eb68d283d201d9a6fbeccfc0efe83fe0502a5

ASTERISK-29753

Change-Id: I7a61974584f6169502e6860fc711919fe7bbfaa7

ASTERISK-29755

Change-Id: I8240013ec3db0669c0acf67e26bf6c9cbb5b72af

ASTERISK-29756

Change-Id: I2f1c1eea1c902492b77b74de9950f20ebbb7e758

ASTERISK-29751

Change-Id: Ie04da5029c57ebee44733bdf05013156abe80176

ASTERISK-29750

Change-Id: Iea50173e785b2e9d49bc24c0af7111cfd96d44a9

ASTERISK-29752

Change-Id: If40cbd01d47a6cfd620b18206dedb8460216c8af

ASTERISK-29747

Change-Id: Ic7a1e9453f805a6264fe86c96b7d18b87b376084

Fixes four misuses of the parameter 'name'. Additionally, for
consistency and to avoid such an issue in future, those few other
places, which used '\file name', were changed just to '\file'. Then,
Doxygen uses the name of the current file.

ASTERISK-29733

Change-Id: I0c18b4c863c6988b138c77448057349a9ee7052d

ASTERISK-29736

Change-Id: Ia5370289e6526001a6b52754b533bcea1a9d7e5c

ASTERISK-29735

Change-Id: I56935e73f7bd1d4ae2721d11040f4835da64b810

ASTERISK-29734

Change-Id: I83b51e85cd71867645ab3a8a820f8fd1f065abd2

Correct typos of the following word families:

activities
forward
occurs
unprepared
association
compress
extracted
doubly
callback
prometheus
underlying
keyframe
continue
convenience
calculates
ignorepattern
determine
subscribers
subsystem
synthetic
applies
example
manager
established
result
microseconds
occurrences
unsuccessful
accommodates
related
signifying
unsubscribe
greater
fastforward
itself
unregistering
using
translator
sorcery
implementation
serializers
asynchronous
unknowingly
initialization
determining
category
these
persistent
propagate
outputted
string
allocated
decremented
second
cacheability
destructor
impaired
decrypted
relies
signaling
based
suspended
retrieved
functions
search
auth
considered

ASTERISK-29714

Change-Id: I542ce887a16603f886a915920d5710d4a0a1358d

Add a function to check if there is an exact match a one string between
delimiters in another string.

Add a function that will create an ast_json object out of a list of
Asterisk variables. An excludes string can also optionally be passed
in.

Also, add a macro to make it easier to get object integers.

Change-Id: I5f34f18e102126aef3997f19a553a266d70d6226

The stir_shaken configuration option now has 4 different choices to pick
from: off, attest, verify, and on. Off and on behave the same way they
do now. Attest will only perform attestation on the endpoint, and verify
will only perform verification on the endpoint.

Certain responses are required to be sent based on certain conditions
for STIR/SHAKEN. For example, if we get a Date header that is outside of
the time range that is considered valid, a 403 Stale Date response
should be sent. This and several other responses have been added.

Change-Id: I4ac1ecf652cd0e336006b0ca638dc826b5b1ebf7

Add a new function that converts a speech results type to a string.
Also add another function to unregister an engine, but returns a
pointer to the unregistered engine object instead of a success/fail
integer.

Change-Id: I0f7de17cb411021c09fb03988bc2b904e1380192

OpenSSL is one of those packages that often have alternatives
with later versions.  For instance, CentOS/EL 7 has an
openssl package at version 1.0.2 but there's an openssl11
package from the epel repository that has 1.1.1.  This gets
installed to /usr/include/openssl11 and /usr/lib64/openssl11.
Unfortunately, the existing --with-ssl and --with-crypto
./configure options expect to point to a source tree and
don't work in this situation.  Also unfortunately, the
checks in ./configure don't use pkg-config.

In order to make this work with the existing situation, you'd
have to run...
./configure --with-ssl=/usr/lib64/openssl11 \
    --with-crypto=/usr/lib64/openssl11 \
    CFLAGS=-I/usr/include/openssl11

BUT...  those options don't get passed down to bundled pjproject
so when you run make, you have to include the CFLAGS again
which is a big pain.

Oh...  To make matters worse, although you can specify
PJPROJECT_CONFIGURE_OPTS on the ./configure command line,
they don't get saved so if you do a make clean, which will
force a re-configure of bundled pjproject, those options
don't get used.

So...

* In configure.ac... Since pkg-config is installed by install_prereq
  anyway, we now use it to check for the system openssl >= 1.1.0.
  If that works, great.  If not, we check for the openssl11
  package. If that works, great.  If not, we fall back to just
  checking for any openssl.  If pkg-config isn't installed for some
  reason, or --with-ssl=<dir> or --with-crypto=<dir> were specified
  on the ./configure command line, we fall back to the existing
  logic that uses AST_EXT_LIB_CHECK().

* The whole OpenSSL check process has been moved up before
  THIRD_PARTY_CONFIGURE(), which does the initial pjproject
  bundled configure, is run.  This way the results of the above
  checks, which may result in new include or library directories,
  is included.

* Although not strictly needed for openssl, We now save the value of
  PJPROJECT_CONFIGURE_OPTS in the makeopts file so it can be used
  again if a re-configure is triggered.

ASTERISK-29693

Change-Id: I341ab7603e6b156aa15a66f43675ac5029d5fbde

Discovered while looking at ASTERISK~29684. Usage was removed in change
I3c77c7b00b2ffa2e935632097fa057b9fdf480c0.

Change-Id: Iaf2f7a16ea5a7eee6375319347e4b40b8e7b10e3

In res_pjsip_sdp_rtp, the bind_rtp_to_media_address option and the
fallback use of the transport's bind address solve problems sending
media on systems that cannot send ipv4 packets on ipv6 sockets, and
certain other situations. This change extends both of these behaviors
to UDPTL sessions as well in res_pjsip_t38, to fix fax-specific
problems on these systems, introducing a new option
endpoint/t38_bind_udptl_to_media_address.

ASTERISK-29402

Change-Id: I87220c0e9cdd2fe9d156846cb906debe08c63557

The behavior of max_contacts and remove_existing are connected.  If
remove_existing is enabled, the soonest expiring contacts are removed.
This may occur when there is an unavailable contact.  Similarly,
when remove_existing is not enabled, registrations from good
endpoints are rejected in favor of retaining unavailable contacts.

This commit adds a new AOR option remove_unavailable, and the effect
of this setting will depend on remove_existing.  If remove_existing
is set to no, we will still remove unavailable contacts when they
exceed max_contacts, if there are any. If remove_existing is set to
yes, we will prioritize the removal of unavailable contacts before
those that are expiring soonest.

ASTERISK-29525

Change-Id: Ia2711b08f2b4d1177411b1be23e970d7fdff5784

Adds the ability for users to log to custom log levels
by providing custom log level names in logger.conf. Also
adds a logger show levels CLI command.

ASTERISK-29529

Change-Id: If082703cf81a436ae5a565c75225fa8c0554b702

Adds parsing of ANI II digits (Originating
Line Information) to PJSIP, on par with
what currently exists in chan_sip.

ASTERISK-29472

Change-Id: Ifc938a7a7d45ce33999ebf3656a542226f6d3847

Up until now, all of the logic used to translate
arguments to the Say applications has been
directly coupled to playback, preventing other
modules from using this logic.

This refactors code in say.c and adds a SAYFILES
function that can be used to retrieve the file
names that would be played. These can then be
used in other applications or for other purposes.

Additionally, a SayMoney application and a SayOrdinal
application are added. Both SayOrdinal and SayNumber
are also expanded to support integers greater than
one billion.

ASTERISK-29531

Change-Id: If9718c89353b8e153d84add3cc4637b79585db19

dsp.c contains arbitrary tone detection functionality
which is currently only used for fax tone recognition.
This change makes this functionality publicly
accessible so that other modules can take advantage
of this.

Additionally, a WaitForTone and TONE_DETECT app and
function are included to allow users to do their
own tone detection operations in the dialplan.

ASTERISK-29546

Change-Id: Ie38c395000f4fd4d04e942e8658e177f8f499b26

IPv6 nameserver addresses are stored in different part of the
__res_state structure, so look there if we appear to have support for
it.

ASTERISK-28004 #close

Change-Id: I67067077d8a406ee996664518d9c8fbf11f6977d

Allows for the digit # to be read as a digit,
just like any other DTMF digit, as opposed to
forcing it to be used as an end of input
indicator. The default behavior remains
unchanged.

ASTERISK-18454 #close

Change-Id: I3033432adb9d296ad227e76b540b8b4a2417665b

Meter types are not well supported,
lacking support in telegraf, datadog and the official statsd servers.
We deprecate meters and provide a compliant fallback for any existing usages.

A flag has been introduced to allow meters to fallback to counters.


ASTERISK-29513

Change-Id: I5fcb385983a1b88f03696ff30a26b55c546a1dd7

When we try to play a list of sound files in the same Play command,
we get only one PlaybackFinish event, after all sounds are played.

But in the case where the Play fails (because channel is destroyed
for example), Asterisk will send one PlaybackFinish event for each
sound file still to be played. If the list is big, Asterisk is
sending many events.

This patch adds a failed state so we can understand that the play
failed. On that case we don't send the event, if we still have a
list of sounds to be played.

When we reach the last sound, we send the PlaybackFinish with
the failed state.

ASTERISK-29464 #close

Change-Id: I4c2e5921cc597702513af0d7c6c2c982e1798322