Skip to content
Snippets Groups Projects
Select Git revision
  • dev_fxs_no_wb
  • fix_transport_fallback_at_dns_failure
  • 16302-renew-registration
  • asterisk_rdkb
  • 14600-wenpeng
  • fix_fallback
  • 14666_fxs_no_wideband_codec
  • fix_srv_records
  • wenpeng-test-250121
  • wenpeng-registration-test
  • fix_deadlock_in_bridge_peer_functions
  • devel default protected
  • securesip_pjproject_part1
  • PJ_Example_Review
  • fix_re_register_authorization_header
  • fix_internal_calls_auth
  • fix_internal_calls
  • Secure_SIPtelephony_part1
  • SIPtelephony_DECT_syslog
  • syslog_develop_phase1
  • 22.0.0-pre1
  • 21.4.2
  • 20.9.2
  • 18.24.2
  • certified-20.7-cert2
  • certified-18.9-cert11
  • 21.4.1
  • 20.9.1
  • 18.24.1
  • 21.4.0
  • 20.9.0
  • 18.24.0
  • certified-20.7-cert1
  • certified-18.9-cert10
  • 21.4.0-rc1
  • 20.9.0-rc1
  • 18.24.0-rc1
  • 21.3.1
  • 20.8.1
  • 18.23.1
40 results
Search by author
  • Any Author
  • Adam Porteous Adam Porteous adam.porteous
  • Alex Hopkins Alex Hopkins 59hopper
  • Amin Ben Romdhane Amin Ben Romdhane amin.benromdhane
  • Andreas Gnau Andreas Gnau AGnau
  • Andrej Kucharik Andrej Kucharik andrej.kucharik
  • Andrii Pypa Andrii Pypa andrii.pypa
  • Anjan Chanda Anjan Chanda anjancx
  • Balalakshmi Arunachalam Rajendran Balalakshmi Arunachalam Rajendran arbala
  • Benjamin Larsson Benjamin Larsson benjamin
  • Charles Foster Charles Foster charles.foster_bt.com
  • Dariusz Iwanoczko Dariusz Iwanoczko dariusz.iwanoczko
  • Divya Chandrasekaran Divya Chandrasekaran divya.c
  • Dominic Lake Dominic Lake dominic.lake
  • Elena Vengerova Elena Vengerova helen
  • Erik Karlsson Erik Karlsson erik.karlsson
  • Filip Matusiak Filip Matusiak filmat
  • Filip Strelec Filip Strelec filip.strelec
  • Fredrik Östling Fredrik Östling fredrik.ostling
  • Geoff Elliott Geoff Elliott gdelliott
  • George Yang George Yang gyang
20 authors
  1. Apr 12, 2017
    • George Joseph's avatar
      modules: change module LOAD_FAILUREs to LOAD_DECLINES · 747beb1e
      George Joseph authored 
      In all non-pbx modules, AST_MODULE_LOAD_FAILURE has been changed
to AST_MODULE_LOAD_DECLINE.  This prevents asterisk from exiting
if a module can't be loaded.  If the user wishes to retain the
FAILURE behavior for a specific module, they can use the "require"
or "preload-require" keyword in modules.conf.

A new API was added to logger: ast_is_logger_initialized().  This
allows asterisk.c/check_init() to print to the error log once the
logger subsystem is ready instead of just to stdout.  If something
does fail before the logger is initialized, we now print to stderr
instead of stdout.

Change-Id: I5f4b50623d9b5a6cb7c5624a8c5c1274c13b2b25
      747beb1e
  3. Oct 27, 2016
    • Corey Farrell's avatar
      Remove ASTERISK_REGISTER_FILE. · a6e5bae3
      Corey Farrell authored 
      ASTERISK_REGISTER_FILE no longer has any purpose so this commit removes
all traces of it.

Previously exported symbols removed:
* __ast_register_file
* __ast_unregister_file
* ast_complete_source_filename

This also removes the mtx_prof static variable that was declared when
MTX_PROFILE was enabled.  This variable was only used in lock.c so it
is now initialized in that file only.

ASTERISK-26480 #close

Change-Id: I1074af07d71f9e159c48ef36631aa432c86f9966
      a6e5bae3
  5. Jun 08, 2016
    • Timo Teräs's avatar
      Fixes to include signal.h · 39b69ab5
      Timo Teräs authored 
      POSIX defines signal.h. sys/signal.h should not be used as it is
c-library internal header which may or may not exist. Notably with
musl it generates warning of being incorrect.

Change-Id: Ia56b0aa1d84b5c590114867b1b384a624f39a6fc
      39b69ab5
  7. Nov 09, 2015
  9. Aug 19, 2015
    • Richard Mudgett's avatar
      rtp_engine.c: Initial split of payload types into rx and tx mappings. · 1a549ed1
      Richard Mudgett authored 
      There are numerous problems with the current implementation of the RTP
payload type mapping in Asterisk.  It uses only one mapping structure to
associate payload types to codecs.  The single mapping is overkill if all
of the payload type values are well known values.  Dynamic payload type
mappings do not work as well with the single mapping because RFC3264
allows each side of the link to negotiate different dynamic mappings for
what they want to receive.  Not only could you have the same codec mapped
for sending and receiving on different payload types you could wind up
with the same payload type mapped to different codecs for each direction.

1) An independent payload type mapping is needed for sending and
receiving.

2) The receive mapping needs to keep track of previous mappings because of
the slack to when negotiation happens and current packets in flight using
the old mapping arrive.

3) The transmit mapping only needs to keep track of the current negotiated
values since we are sending the packets and know when the switchover takes
place.

* Needed to create ast_rtp_codecs_payload_code_tx() and make some callers
use the new function because ast_rtp_codecs_payload_code() was used for
mappings in both directions.

* Needed to create ast_rtp_codecs_payloads_xover() for cases where we need
to pass preferred codec mappings to the peer channel for early media
bridging or when we need to prefer the offered mapping that RFC3264 says
we SHOULD use.

* ast_rtp_codecs_payloads_xover() and ast_rtp_codecs_payload_code_tx() are
the only new public functions created.  All the others were only used for
the tx or rx mapping direction so the function doxygen now reflects which
direction the function operates.

* chan_mgcp.c: Removed call to ast_rtp_codecs_payloads_clear() as doing
that makes no sense when processing an incoming SDP.  We would be wiping
out any mappings that we set for the possible outgoing SDP we sent
earlier.

ASTERISK-25166
Reported by: Kevin Harwell

ASTERISK-17410
Reported by: Boris Fox

Change-Id: Iaf6c227bca68cb7c414cf2fd4108a8ac98bd45ac
      1a549ed1
  11. Jul 02, 2015
  13. May 23, 2015
    • Corey Farrell's avatar
      Stasis: Fix unsafe use of stasis_unsubscribe in modules. · 50044fdc
      Corey Farrell authored 
      Many uses of stasis_unsubscribe in modules can be reached through unload.
These have been switched to stasis_unsubscribe_and_join.

Some subscription callbacks do nothing, for these I've created a noop
callback function in stasis.c.  This is used by some modules that monitor
MWI topics in order to enable cache, since the callback does not become
invalid after dlclose it is safe to use stasis_unsubscribe on these, even
during module unload.

ASTERISK-25121 #close

Change-Id: Ifc2549fbd8eef7d703c222978e8f452e2972189c
      50044fdc
  15. May 13, 2015
  17. Apr 30, 2015
    • Mark Michelson's avatar
      Restrict functionality when ACLs are misconfigured. · 11ffcf66
      Mark Michelson authored 
      This patch has two main purposes:

1) Improve warning messages when ACLs are configured improperly.
2) Prevent misconfigured ACLs from allowing potentially unwanted
traffic.

To acomplish point (2) in most cases, whatever configuration object that
the ACL belonged to was not allowed to load.

The one exception is res_pjsip_acl. In that case, ACLs are their own
configuration object. Furthermore, the module loading code has no
indication that a ACL configuration had a failure. So the tactic taken
here is to create an ACL that just blocks everything.

ASTERISK-24969
Reported by Corey Farrell

Change-Id: I2ebcb6959cefad03cea4d81401be946203fcacae
      11ffcf66
  19. Apr 13, 2015
    • Matt Jordan's avatar
      git migration: Refactor the ASTERISK_FILE_VERSION macro · 4a582616
      Matt Jordan authored 
      Git does not support the ability to replace a token with a version
string during check-in. While it does have support for replacing a
token on clone, this is somewhat sub-optimal: the token is replaced
with the object hash, which is not particularly easy for human
consumption. What's more, in practice, the source file version was often
not terribly useful. Generally, when triaging bugs, the overall version
of Asterisk is far more useful than an individual SVN version of a file. As a
result, this patch removes Asterisk's support for showing source file
versions.

Specifically, it does the following:

* Rename ASTERISK_FILE_VERSION macro to ASTERISK_REGISTER_FILE, and
  remove passing the version in with the macro. Other facilities
  than 'core show file version' make use of the file names, such as
  setting a debug level only on a specific file. As such, the act of
  registering source files with the Asterisk core still has use. The
  macro rename now reflects the new macro purpose.

* main/asterisk:
  - Refactor the file_version structure to reflect that it no longer
    tracks a version field.
  - Remove the "core show file version" CLI command. Without the file
    version, it is no longer useful.
  - Remove the ast_file_version_find function. The file version is no
    longer tracked.
  - Rename ast_register_file_version/ast_unregister_file_version to
    ast_register_file/ast_unregister_file, respectively.

* main/manager: Remove value from the Version key of the ModuleCheck
  Action. The actual key itself has not been removed, as doing so would
  absolutely constitute a backwards incompatible change. However, since
  the file version is no longer tracked, there is no need to attempt to
  include it in the Version key.

* UPGRADE: Add notes for:
  - Modification to the ModuleCheck AMI Action
  - Removal of the "core show file version" CLI command

Change-Id: I6cf0ff280e1668bf4957dc21f32a5ff43444a40e
      4a582616
  21. Dec 01, 2014
    • Matthew Jordan's avatar
      main/stasis: Allow subscriptions to use a threadpool for message delivery · 1106e8fd
      Matthew Jordan authored 
      Prior to this patch, all Stasis subscriptions would receive a dedicated
thread for servicing published messages. In contrast, prior to r400178
(see review https://reviewboard.asterisk.org/r/2881/), the subscriptions
shared a thread pool. It was discovered during some initial work on Stasis
that, for a low subscription count with high message throughput, the
threadpool was not as performant as simply having a dedicated thread per
subscriber.

For situations where a subscriber receives a substantial number of messages
and is always present, the model of having a dedicated thread per subscriber
makes sense. While we still have plenty of subscriptions that would follow
this model, e.g., AMI, CDRs, CEL, etc., there are plenty that also fall into
the following two categories:
* Large number of subscriptions, specifically those tied to endpoints/peers.
* Low number of messages. Some subscriptions exist specifically to coordinate
  a single message - the subscription is created, a message is published, the
  delivery is synchronized, and the subscription is destroyed.
In both of the latter two cases, creating a dedicated thread is wasteful (and
in the case of a large number of peers/endpoints, harmful). In those cases,
having shared delivery threads is far more performant.

This patch adds the ability of a subscriber to Stasis to choose whether or not
their messages are dispatched on a dedicated thread or on a threadpool. The
threadpool is configurable through stasis.conf.

Review: https://reviewboard.asterisk.org/r/4193

ASTERISK-24533 #close
Reported by: xrobau
Tested by: xrobau
........

Merged revisions 428681 from http://svn.asterisk.org/svn/asterisk/branches/12
........

Merged revisions 428687 from http://svn.asterisk.org/svn/asterisk/branches/13


git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@428688 65c4cc65-6c06-0410-ace0-fbb531ad65f3
      1106e8fd
  23. Nov 09, 2014
  25. Sep 26, 2014
  27. Jul 25, 2014
  29. Jul 20, 2014
  31. May 22, 2014
  33. May 09, 2014
  35. Mar 07, 2014
    • Scott Griepentrog's avatar
      uniqueid: channel linkedid, ami, ari object creation with id's · 80ef9a21
      Scott Griepentrog authored 
      Much needed was a way to assign id to objects on creation, and
much change was necessary to accomplish it.  Channel uniqueids
and linkedids are split into separate string and creation time
components without breaking linkedid propgation.  This allowed
the uniqueid to be specified by the user interface - and those
values are now carried through to channel creation, adding the
assignedids value to every function in the chain including the
channel drivers. For local channels, the second channel can be
specified or left to default to a ;2 suffix of first.  In ARI,
bridge, playback, and snoop objects can also be created with a
specified uniqueid.

Along the way, the args order to allocating channels was fixed
in chan_mgcp and chan_gtalk, and linkedid is no longer lost as
masquerade occurs.

(closes issue ASTERISK-23120)
Review: https://reviewboard.asterisk.org/r/3191/
........

Merged revisions 410157 from http://svn.asterisk.org/svn/asterisk/branches/12


git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@410158 65c4cc65-6c06-0410-ace0-fbb531ad65f3
      80ef9a21
  37. Jan 21, 2014
  39. Dec 19, 2013
    • Richard Mudgett's avatar
      Voicemail: Remove mailbox identifier format (box@context) assumptions in the system. · e4803bbd
      Richard Mudgett authored 
      This change is in preparation for external MWI support.

Removed code from the system for normal mailbox handling that appends
@default to the mailbox identifier if it does not have a context.  The
only exception is the legacy hasvoicemail users.conf option.  The legacy
option will only work for app_voicemail mailboxes.  The system cannot make
any assumptions about the format of the mailbox identifer used by
app_voicemail.

chan_sip and chan_dahdi/sig_pri had the most changes because they both
tried to interpret the mailbox identifier.  chan_sip just stored and
compared the two components.  chan_dahdi actually used the box
information.

The ISDN MWI support configuration options had to be reworked because
chan_dahdi was parsing the box@context format to get the box number.  As a
result the mwi_vm_boxes chan_dahdi.conf option was added and is documented
in the chan_dahdi.conf.sample file.

Review: https://reviewboard.asterisk.org/r/3072/
........

Merged revisions 404348 from http://svn.asterisk.org/svn/asterisk/branches/12


git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@404350 65c4cc65-6c06-0410-ace0-fbb531ad65f3
      e4803bbd
  41. Dec 18, 2013
  43. Dec 05, 2013
  45. Dec 03, 2013
  47. Oct 23, 2013
  49. Oct 03, 2013
  51. Oct 02, 2013
  53. Sep 30, 2013
    • David M. Lee's avatar
      Multiple revisions 399887,400138,400178,400180-400181 · 2de42c2a
      David M. Lee authored 
      ........
  r399887 | dlee | 2013-09-26 10:41:47 -0500 (Thu, 26 Sep 2013) | 1 line
  
  Minor performance bump by not allocate manager variable struct if we don't need it
........
  r400138 | dlee | 2013-09-30 10:24:00 -0500 (Mon, 30 Sep 2013) | 23 lines
  
  Stasis performance improvements
  
  This patch addresses several performance problems that were found in
  the initial performance testing of Asterisk 12.
  
  The Stasis dispatch object was allocated as an AO2 object, even though
  it has a very confined lifecycle. This was replaced with a straight
  ast_malloc().
  
  The Stasis message router was spending an inordinate amount of time
  searching hash tables. In this case, most of our routers had 6 or
  fewer routes in them to begin with. This was replaced with an array
  that's searched linearly for the route.
  
  We more heavily rely on AO2 objects in Asterisk 12, and the memset()
  in ao2_ref() actually became noticeable on the profile. This was
  #ifdef'ed to only run when AO2_DEBUG was enabled.
  
  After being misled by an erroneous comment in taskprocessor.c during
  profiling, the wrong comment was removed.
  
  Review: https://reviewboard.asterisk.org/r/2873/
........
  r400178 | dlee | 2013-09-30 13:26:27 -0500 (Mon, 30 Sep 2013) | 24 lines
  
  Taskprocessor optimization; switch Stasis to use taskprocessors
  
  This patch optimizes taskprocessor to use a semaphore for signaling,
  which the OS can do a better job at managing contention and waiting
  that we can with a mutex and condition.
  
  The taskprocessor execution was also slightly optimized to reduce the
  number of locks taken.
  
  The only observable difference in the taskprocessor implementation is
  that when the final reference to the taskprocessor goes away, it will
  execute all tasks to completion instead of discarding the unexecuted
  tasks.
  
  For systems where unnamed semaphores are not supported, a really
  simple semaphore implementation is provided. (Which gives identical
  performance as the original taskprocessor implementation).
  
  The way we ended up implementing Stasis caused the threadpool to be a
  burden instead of a boost to performance. This was switched to just
  use taskprocessors directly for subscriptions.
  
  Review: https://reviewboard.asterisk.org/r/2881/
........
  r400180 | dlee | 2013-09-30 13:39:34 -0500 (Mon, 30 Sep 2013) | 28 lines
  
  Optimize how Stasis forwards are dispatched
  
  This patch optimizes how forwards are dispatched in Stasis.
  
  Originally, forwards were dispatched as subscriptions that are invoked
  on the publishing thread. This did not account for the vast number of
  forwards we would end up having in the system, and the amount of work it
  would take to walk though the forward subscriptions.
  
  This patch modifies Stasis so that rather than walking the tree of
  forwards on every dispatch, when forwards and subscriptions are changed,
  the subscriber list for every topic in the tree is changed.
  
  This has a couple of benefits. First, this reduces the workload of
  dispatching messages. It also reduces contention when dispatching to
  different topics that happen to forward to the same aggregation topic
  (as happens with all of the channel, bridge and endpoint topics).
  
  Since forwards are no longer subscriptions, the bulk of this patch is
  simply changing stasis_subscription objects to stasis_forward objects
  (which, admittedly, I should have done in the first place.)
  
  Since this required me to yet again put in a growing array, I finally
  abstracted that out into a set of ast_vector macros in
  asterisk/vector.h.
  
  Review: https://reviewboard.asterisk.org/r/2883/
........
  r400181 | dlee | 2013-09-30 13:48:57 -0500 (Mon, 30 Sep 2013) | 28 lines
  
  Remove dispatch object allocation from Stasis publishing
  
  While looking for areas for performance improvement, I realized that an
  unused feature in Stasis was negatively impacting performance.
  
  When a message is sent to a subscriber, a dispatch object is allocated
  for the dispatch, containing the topic the message was published to, the
  subscriber the message is being sent to, and the message itself.
  
  The topic is actually unused by any subscriber in Asterisk today. And
  the subscriber is associated with the taskprocessor the message is being
  dispatched to.
  
  First, this patch removes the unused topic parameter from Stasis
  subscription callbacks.
  
  Second, this patch introduces the concept of taskprocessor local data,
  data that may be set on a taskprocessor and provided along with the data
  pointer when a task is pushed using the ast_taskprocessor_push_local()
  call. This allows the task to have both data specific to that
  taskprocessor, in addition to data specific to that invocation.
  
  With those two changes, the dispatch object can be removed completely,
  and the message is simply refcounted and sent directly to the
  taskprocessor.
  
  Review: https://reviewboard.asterisk.org/r/2884/
........

Merged revisions 399887,400138,400178,400180-400181 from http://svn.asterisk.org/svn/asterisk/branches/12


git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@400186 65c4cc65-6c06-0410-ace0-fbb531ad65f3
      2de42c2a
  55. Aug 18, 2013
  57. Aug 17, 2013
    • Kinsey Moore's avatar
      Strip down the old event system · 59753b1e
      Kinsey Moore authored 
      This removes unused code, event types, IE pltypes, and event IE types
where possible and makes several functions private that were once
public. This includes a renumbering of the remaining event and IE types
which breaks binary compatibility with previous versions. The last
remaining consumers of the old event system (or parts thereof) are
main/security_events.c, res/res_security_log.c, tests/test_cel.c,
tests/test_event.c, main/cel.c, and the CEL backends.

Review: https://reviewboard.asterisk.org/r/2703/
(closes issue ASTERISK-22139)


git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396887 65c4cc65-6c06-0410-ace0-fbb531ad65f3
      59753b1e
  59. Aug 02, 2013
  61. Aug 01, 2013
    • Matthew Jordan's avatar
      Support externally initiated parking requests; remove some dead code · 5c4b4824
      Matthew Jordan authored 
      This patch does the following:
 * It adds support for externally initiated parking requests. In particular,
   chan_skinny has a protocol level message that initiates a call park.
   This patch now supports that option, as well as the protocol specific
   mechanisms in chan_dahdi/sig_analog and chan_mgcp.
 * A parking bridge features virtual table has been added that provides
   access to the parking functionality that the Bridging API needs. This
   includes requests to park an entire 'call' (with little or no additional
   information, thank you chan_skinny), perform a blind transfer to a parking
   extension, determine if an extension is a parking extension, as well as the
   actual "do the parking" request from the Bridging API.
 * Refactoring in chan_mgcp, chan_skinny, and chan_dahdi to make use of the new
   functions
 * The removal of some - but not all - dead parking code from features.c

This also fixed blind transferring a multi-party bridge to a parking lot (which
was implemented, but had at least one code path where using the parking features
kK might not have worked)

Review: https://reviewboard.asterisk.org/r/2710

(closes issue ASTERISK-22134)
Reported by: Matt Jordan



git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396028 65c4cc65-6c06-0410-ace0-fbb531ad65f3
      5c4b4824
    • David M. Lee's avatar
      Split caching out from the stasis_caching_topic. · e1b959cc
      David M. Lee authored 
      In working with res_stasis, I discovered a significant limitation to
the current structure of stasis_caching_topics: you cannot subscribe
to cache updates for a single channel/bridge/endpoint/etc.

To address this, this patch splits the cache away from the
stasis_caching_topic, making it a first class object. The stasis_cache
object is shared amongst individual stasis_caching_topics that are
created per channel/endpoint/etc. These are still forwarded to global
whatever_all_cached topics, so their use from most of the code does
not change.

In making these changes, I noticed that we frequently used a similar
pattern for bridges, endpoints and channels:

     single_topic  ---------------->  all_topic
           ^
           |
     single_topic_cached  ----+---->  all_topic_cached
                              |
                              +---->  cache

This pattern was extracted as the 'Stasis Caching Pattern', defined in
stasis_caching_pattern.h. This avoids a lot of duplicate code between
the different domain objects.

Since the cache is now disassociated from its upstream caching topics,
this also necessitated a change to how the 'guaranteed' flag worked
for retrieving from a cache. The code for handling the caching
guarantee was extracted into a 'stasis_topic_wait' function, which
works for any stasis_topic.

(closes issue ASTERISK-22002)
Review: https://reviewboard.asterisk.org/r/2672/


git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@395954 65c4cc65-6c06-0410-ace0-fbb531ad65f3
      e1b959cc
  63. Jul 25, 2013
    • Matthew Jordan's avatar
      A great big renaming patch · cafc1158
      Matthew Jordan authored 
      This patch renames the bridging* files to bridge*. This may seem pedantic
and silly, but it fits better in line with current Asterisk naming conventions:
* channel is not "channeling"
* monitor is not "monitoring"
etc.

A bridge is an object. It is a first class citizen in Asterisk. "Bridging" is
the act of using a bridge on a set of channels - and the API that fulfills that
role is more than just the action.

(closes issue ASTERISK-22130)


git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@395378 65c4cc65-6c06-0410-ace0-fbb531ad65f3
      cafc1158
  65. Jul 23, 2013
    • Richard Mudgett's avatar
      Some chan_dahdi protected function renaming. · b4dd4ffb
      Richard Mudgett authored 
      analog_lib_handles --> dahdi_analog_lib_handles
enable_dtmf_detect --> dahdi_dtmf_detect_enable
disable_dtmf_detect --> dahdi_dtmf_detect_disable
dahdi_enable_ec --> dahdi_ec_enable
dahdi_disable_ec --> dahdi_ec_disable
update_conf --> dahdi_conf_update
dahdi_link --> dahdi_master_slave_link
dahdi_unlink --> dahdi_master_slave_unlink

(closes issue ASTERISK-22129)
Reported by: rmudgett


git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@395167 65c4cc65-6c06-0410-ace0-fbb531ad65f3
      b4dd4ffb
  67. Jul 05, 2013
    • Matthew Jordan's avatar
      Refactor RTCP events over to Stasis; associate with channels · d0a55fa5
      Matthew Jordan authored 
      This patch does the following:

* It merges Jaco Kroon's patch from ASTERISK-20754, which provides channel
  information in the RTCP events. Because Stasis provides a cache, Jaco's
  patch was modified to pass the channel uniqueid to the RTP layer as
  opposed to a pointer to the channel. This has the following benefits:
  (1) It keeps the RTP engine 'clean' of references back to channels
  (2) It prevents circular dependencies and other potential ref counting issues
* The RTP engine now allows any RTP implementation to raise RTCP messages.
  Potentially, other implementations (such as res_rtp_multicast) could also
  raise RTCP information. The engine provides structs to represent RTCP headers
  and RTCP SR/RR reports.
* Some general refactoring in res_rtp_asterisk was done to try and tame the
  RTCP code. It isn't perfect - that's *way* beyond the scope of this work -
  but it does feel marginally better.
* A few random bugs were fixed in the RTCP statistics. (Example: performing an
  assignment of a = a is probably not correct)
* We now raise RTCP events for each SR/RR sent/received. Previously we wouldn't
  raise an event when we sent a RR report.

Note that this work will be of use to others who want to monitor call quality
or build modules that report call quality statistics. Since the events are now
moving across the Stasis message bus, this is far easier to accomplish. It is
also a first step (though by no means the last step) towards getting Olle's
pinefrog work incorporated.

Again: note that the patch by Jaco Kroon was modified slightly for this work;
however, he did all of the hard work in finding the right places to set the
channel in the RTP engine across the channel drivers. Much thanks goes to Jaco
for his hard work here.

Review: https://reviewboard.asterisk.org/r/2603/

(closes issue ASTERISK-20574)
Reported by: Jaco Kroon
patches:
  asterisk-rtcp-channel.patch uploaded by jkroon (License 5671)

(closes issue ASTERISK-21471)
Reported by: Matt Jordan



git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@393740 65c4cc65-6c06-0410-ace0-fbb531ad65f3
      d0a55fa5
  69. Jun 17, 2013
    • Matthew Jordan's avatar
      Update Asterisk's CDRs for the new bridging framework · 6258bbe7
      Matthew Jordan authored 
      This patch is the initial push to update Asterisk's CDR engine for the new
bridging framework. This patch guts the existing CDR engine and builds the new
on top of messages coming across Stasis. As changes in channel state and bridge
state are detected, CDRs are built and dispatched accordingly. This
fundamentally changes CDRs in a few ways.
(1) CDRs are now *very* reflective of the actual state of channels and bridges.
    This means CDRs track well with what an actual channel is doing - which
    is useful in transfer scenarios (which were previously difficult to pin
    down). It does, however, mean that CDRs cannot be 'fooled'. Previous
    behavior in Asterisk allowed for CDR applications, channels, and other
    properties to be spoofed in parts of the code - this no longer works.
(2) CDRs have defined behavior in multi-party scenarios. This behavior will not
    be what everyone wants, but it is a defined behavior and as such, it is
    predictable.
(3) The CDR manipulation functions and applications have been overhauled. Major
    changes have been made to ResetCDR and ForkCDR in particular. Many of the
    options for these two applications no longer made any sense with the new
    framework and the (slightly) more immutable nature of CDRs.

There are a plethora of other changes. For a full description of CDR behavior,
see the CDR specification on the Asterisk wiki.

(closes issue ASTERISK-21196)

Review: https://reviewboard.asterisk.org/r/2486/



git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@391947 65c4cc65-6c06-0410-ace0-fbb531ad65f3
      6258bbe7
  71. Jun 06, 2013
    • Mark Michelson's avatar
      Refactor the features configuration scheme. · 2dc8a060
      Mark Michelson authored 
      Features configuration is handled in its own API in
features_config.h and features_config.c. This way, features
configuration is accessible to anything that needs it.

In addition, features configuration has been altered to
be more channel-oriented. Most callers of features API
code will be supplying a channel so that the individual
channel's settings will be acquired rather than the global
setting.

Missing from this commit is XML documentation for the
features configuration. That will be handled in a separate
commit.

Review: https://reviewboard.asterisk.org/r/2578/

(issue ASTERISK-21542)



git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@390751 65c4cc65-6c06-0410-ace0-fbb531ad65f3
      2dc8a060
  73. May 28, 2013