Asterisk makefiles auto-detect SSL library availability,
then they assume that pjproject makefiles will also autodetect
an SSL library at the same time, so they do not pass on the
autodetection result to pjproject.

This normally works, except the pjproject makefiles disables
autodetection when cross-compiling.

Fix by explicitly configuring pjproject to use SSL if we
have been told to use it or it was autodetected

ASTERISK-30424 #close

Change-Id: I8fe2999ea46710e21d1d55a1bed92769c6ebded9

Removed multiple patches.

Code chages in res_pjsip_pubsub due to changes in evsub.

Pjsip now calls on_evsub_state() before on_rx_refresh(),
so the sub tree deletion that used to take place in
on_evsub_state() now must take place in on_rx_refresh().

Additionally, pjsip now requires that you send the NOTIFY
from within on_rx_refresh(), otherwise it will assert
when going to send the 200 OK. The idea is that it will
look for this NOTIFY and cache it until after sending the
response in order to deal with the self-imposed message
mis-order. Asterisk previously dealt with this by pushing
the NOTIFY in on_rx_refresh(), but pjsip now forces us
to use it's method.

Changes were required to configure in order to detect
which way pjsip handles this as the two are not
compatible for the reasons mentioned above.

A corresponding change in testsuite is required in order
to deal with the small interal timing changes caused by
moving the NOTIFY send.

ASTERISK-30325

Change-Id: I50b00cac89d950d3511d7b250a1c641965d9fe7f

ASTERISK-30037 #close

Change-Id: I0273e85eeeb6b8e46703f24cd74d84f3daf0a69a

This change adds support using the pjsip_tls_transport_restart
function for reloading the TLS certificate and key, if the filenames
remain unchanged. This is useful for Let's Encrypt and other
situations. Note that no restart of the transport will occur if
the certificate and key remain unchanged.

ASTERISK-30186

Change-Id: I9bc95a6bf791830a9491ad9fa43c17d4010028d0

Make sure that we have a working sed before trying to use it.

ASTERISK-30059 #close

Change-Id: I9abad67a5df11b665d480feec304ab9d6f55cc76

Use pkg-config to detect libxml2, falling back to xml2-config if the
former is not available.

This patch ensures Asterisk continues to build on systems without
xml2-config installed.

The patch also updates the associated 'configure' files.

ASTERISK-29970 #close

Change-Id: I3c90dfe0b0590486cbb8e6d426a7c5c4199410c0

Added functions to open, close, and apply XML Stylesheets
to XML documents.  Although the presence of libxslt was already
being checked by configure, it was only happening if xmldoc was
enabled.  Now it's checked regardless.

Added ability to parse a string consisting of comma separated
name/value pairs into an ast_variable list.  The reverse of
ast_variable_list_join().

Change-Id: I1e1d149be22165a1fb8e88e2903a36bba1a6cf2e

autoconfigh.h.in was missed in the original review for this
issue. Additionally it looks like I have newer pkg-config autoconf
macros on my development machine.

ASTERISK-29817

Change-Id: I3c85a4de82c5d7d6e0e23dad4c33bb650a86a57b

Fix the configure script not to detect the presence of gethostbyname_r()
on NetBSD incorrectly.  NetBSD includes it as an internal libc symbol
that is not exposed in system headers and that is incompatible with
other implementations.  In order to avoid misdetecting it, perform
the symbol check only if the declaration is found in the public header
first.

ASTERISK-29817

Change-Id: Iafa359b09908251bcd299ff54be003ea129b9eda

There are times when you need to troubleshoot issues with bundled
pjproject or add new features that need to be pushed upstream
but...

* The source directory created by extracting the pjproject tarball
  is not scanned for code changes so you have to keep forcing
  rebuilds.
* The source directory isn't a git repo so you can't easily create
  patches, do git bisects, etc.
* Accidentally doing a make distclean will ruin your day by wiping
  out the source directory, and your changes.
* etc.

This commit makes that easier.
See third-party/pjproject/README-hacking.md for the details.

ASTERISK-29824

Change-Id: Idb1251040affdab31d27cd272dda68676da9b268

Furthermore, consistently use not 'No' but ':' for non-existent file
paths. Finally, use the same pattern for checking file paths:
  a)  = ":"
  b) != "x:"

Change-Id: I0c80c76d2cc98b0e5c859131290f4e3141a1a544

ASTERISK-29724

Change-Id: I59aa0e52effdc16992f3a736ccf73430a6ef135b

ASTERISK-29709

Change-Id: Ie169df878bdfc3a06b3097c5c38d185b480f54d4

OpenSSL is one of those packages that often have alternatives
with later versions.  For instance, CentOS/EL 7 has an
openssl package at version 1.0.2 but there's an openssl11
package from the epel repository that has 1.1.1.  This gets
installed to /usr/include/openssl11 and /usr/lib64/openssl11.
Unfortunately, the existing --with-ssl and --with-crypto
./configure options expect to point to a source tree and
don't work in this situation.  Also unfortunately, the
checks in ./configure don't use pkg-config.

In order to make this work with the existing situation, you'd
have to run...
./configure --with-ssl=/usr/lib64/openssl11 \
    --with-crypto=/usr/lib64/openssl11 \
    CFLAGS=-I/usr/include/openssl11

BUT...  those options don't get passed down to bundled pjproject
so when you run make, you have to include the CFLAGS again
which is a big pain.

Oh...  To make matters worse, although you can specify
PJPROJECT_CONFIGURE_OPTS on the ./configure command line,
they don't get saved so if you do a make clean, which will
force a re-configure of bundled pjproject, those options
don't get used.

So...

* In configure.ac... Since pkg-config is installed by install_prereq
  anyway, we now use it to check for the system openssl >= 1.1.0.
  If that works, great.  If not, we check for the openssl11
  package. If that works, great.  If not, we fall back to just
  checking for any openssl.  If pkg-config isn't installed for some
  reason, or --with-ssl=<dir> or --with-crypto=<dir> were specified
  on the ./configure command line, we fall back to the existing
  logic that uses AST_EXT_LIB_CHECK().

* The whole OpenSSL check process has been moved up before
  THIRD_PARTY_CONFIGURE(), which does the initial pjproject
  bundled configure, is run.  This way the results of the above
  checks, which may result in new include or library directories,
  is included.

* Although not strictly needed for openssl, We now save the value of
  PJPROJECT_CONFIGURE_OPTS in the makeopts file so it can be used
  again if a re-configure is triggered.

ASTERISK-29693

Change-Id: I341ab7603e6b156aa15a66f43675ac5029d5fbde

Discovered while looking at ASTERISK~29684. Usage was removed in change
I3c77c7b00b2ffa2e935632097fa057b9fdf480c0.

Change-Id: Iaf2f7a16ea5a7eee6375319347e4b40b8e7b10e3

IPv6 nameserver addresses are stored in different part of the
__res_state structure, so look there if we appear to have support for
it.

ASTERISK-28004 #close

Change-Id: I67067077d8a406ee996664518d9c8fbf11f6977d

ASTERISK-29598

Change-Id: I8ef17023f55bf01f2e309b06f4778a8ca7252c91

ASTERISK-29597

Change-Id: I19bb39eed0257ddfef453eb2df5646d073d50fe1

ASTERISK-29596

Change-Id: Ibae9490c1b35cadbf7028d24610f745277c8535e

ASTERISK-29595

Change-Id: Ib5c7d43a780f2fb94cee90738e4c1af211ae4a33

ASTERISK-29594

Change-Id: I79a9961cb5062fadbccb0ea93f087bdd32685316

ASTERISK-29593

Change-Id: Ib53a42ad974c63871344b95078c61c188e43da99

From https://www.mail-archive.com/bug-autoconf@gnu.org/msg04408.html



> ... the long-obsolete AC_HEADER_STDC, previously used internally by
> AC_INCLUDES_DEFAULT, used AC_EGREP_HEADER.  The AC_HEADER_STDC macro
> is now a no-op (and is not used at all within Autoconf anymore), so
> that change is likely what made the first use of AC_EGREP_HEADER the
> one inside the if condition, causing the observed results.

The implication is that the test does nothing anyway, and due to it
being a no-op from 2.70 onwards, results in the required not being set
to yes, resulting in ./configure to fail.

Change-Id: Ic1ff38d87f791fbf1f2a80512f81bb7110392460
Signed-off-by: Jaco Kroon <jaco@uls.co.za>

On Gentoo it's possible to have multiple lua versions installed, all
with a path of /usr, so it's not possible to use the current --with-lua
option to determisticly pin to a specific version as is required by the
Gentoo PMS standards.

This environment variable allows to lock to specific versions,
unversioned check will be skipped if this variable is supplied.

Change-Id: I8c403eda05df25ee0193960262ce849c7d2fd088
Signed-off-by: Jaco Kroon <jaco@uls.co.za>

As described in the issue, /tmp is not a suitable location for a
large amount of cached media files, since most distributions make
/tmp a RAM-based tmpfs mount with limited capacity.

I opted for a location that can be configured separately, as opposed
to using a subdirectory of spooldir, given the different storage
profile (transient files vs files that might stay there indefinitely).

This commit just makes the cache directory configurable, and changes
the default location from /tmp to /var/cache/asterisk.

ASTERISK-29143

Change-Id: Ic54e95199405abacd9e509cef5f08fa14c510b5d

Note to maintainers: Lua 5.4, Lua 5.3, and Lua 5.2 have not been tested
at runtime with pbx_lua. Until then, use the lowest available version
of Lua, if you enabled the module pbx_lua at all.

Change-Id: Ie5270448b11fcb4e2a53d899e4fe7fea793ce7e0

The previous change missed that 'make' uses 'PJPROJECT_BUNDLED' anyway.

ASTERISK-28929

Change-Id: I7ef0e78a06ea391b59d95b99d46bbed3fec4fed9

The configure.m4 script for pjproject contains some += syntax, which
is specific to bash, replacing it with string substitutions makes
the script compatible with traditional Bourne shells.

ASTERISK-28866 #close
Reported-by: Christoph Moench-Tegeder <cmt@FreeBSD.org>

Change-Id: I382a78160e028044598b7da83ec7e1ff42b91c05

ASTERISK-28837

Change-Id: Id057324912a3cfe6f50af372675626bb515907d9

Change-Id: If8445f899ee4ce0c606c484943d4ce0c8e43b5da

Change-Id: I11d5693d25c166c99d8cebffc16184d58f6362de

ASTERISK-28758
Reported by: Patrick Wakano
Reported by: Dmitriy Serov

Change-Id: Ifb6b85c559d116739af00bc48d1f547caa85efac

The Python/C API is used only if the Test Framework was enabled in Asterisk
'make menuselect'. The Test Framework is available only if the Developer Mode
was enabled in Asterisk './configure --enable-dev-mode'. And that Python/C API
is used only if the PJProject was found and not disabled in Asterisk; the user
did not go for './configure --without-pjproject'.

Furthermore, because version 2 of that Python/C API is required (currently) and
because some platforms do not offer a generic version 2, the script searches
for 2.7 explicitly as well.

To avoid version mismatch between the Python/C API and the Python environment,
the script searches for the latter in the same versions, in the same the order
as well. Because this Python/C API is just for (some) Asterisk contributors,
the script also goes for the Python 3 environment as a last resort for all
other Asterisk users. This allows 'make full' even on minimal installations of
Ubuntu 18.04 LTS and newer.

Because the Python/C API is Asterisk contributor specific, the Python packages
are removed from the script './contrib/scripts/install_prereq' as this script
is intended for Asterisk users. Asterisk contributors have to install much more
packages in any case, like:
sudo apt install autoconf automake git git-review python2.7-dev

ASTERISK-28824
ASTERISK-27717

Change-Id: Id46d357e18869f64dcc217b8fdba821b63eeb876

Furthermore, the nowhere used compress is removed.

ASTERISK-28816

Change-Id: I77daab80cfabb56d51c3ea6b1d14bd9b9fbc577c

ASTERISK-28818

Change-Id: Ib7f246896457d9e3b14d7f5199136d6545ce0b6f

We (Gentoo distribution) reckon that in the case of multiple versions of
gmime installed we should prefer the newest one.

Change-Id: Idf7be613230232eb1d573d93c4a5a8297f4ecd2d

When building check_expr2 with ASLR PIE hardening enabled the linker
fails. This is resolved by adding the regular compiler flags when
building the object files from ast_expr2f.c and ast_expr2.c.

Note: The STANDALONE define is removed because it is already defined in
_ASTCFLAGS. YY_NO_INPUT is defined so that the compile survives
'--enable-dev-mode'.

Also, a Makefile variable "CROSS_COMPILING" is added so that the
build system doesn't try to run check_expr2 when cross-compiling,
because that will fail the build as will.

ASTERISK-28685 #close

Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
Change-Id: If435b7db9f9ad8266245bda51c81c220f9658915

When handling ICE negotiations, it's possible that there can be a delay
between STUN binding requests which in turn will cause a delay in ICE
completion, preventing media from flowing. It should be possible to send
media when there is at least one valid pair, preventing this scenario
from occurring.

A change was added to PJPROJECT that adds an optional callback
(on_valid_pair) that will be called when the first valid pair is found
during ICE negotiation. Asterisk uses this to start the DTLS handshake,
allowing media to flow. It will only be called once, either on the first
valid pair, or when ICE negotiation is complete.

ASTERISK-28716

Change-Id: Ia7b68c34f06d2a1d91c5ed51627b66fd0363d867

Instead of trying to use the defined MySQL client version from the
header use a configure check to determine whether the bool or my_bool
type should be used for defining a boolean.

ASTERISK-28604

Change-Id: Id2225b3785115de074c50c123ff1a68005b4a9c7

This change adds support for larger TLS certificates by allowing
OpenSSL to fragment the DTLS packets according to the configured
MTU. By default this is set to 1200.

This is accomplished by implementing our own BIO method that
supports MTU querying. The configured MTU is returned to OpenSSL
which fragments the packet accordingly. When a packet is to be
sent it is done directly out the RTP instance.

ASTERISK-28018

Change-Id: If2d5032019a28ffd48f43e9e93ed71dbdbf39c06