This moves netsock.c / netsock.h to the chan_iax2 module.  netsock.h has
been marked deprecated since 13.0.0, chan_iax2 is the only remaining
user.

Change-Id: I28c6578043bac18de5ea608e136acec4f83d5dd3

ACO uses regex in many situations where it is completely unneeded.  In
some cases this doubles the total processing performed by
aco_process_config.

* Create ACO_IGNORE category type for use in place of skip_category
  regex source string.
* Create additional aco_category_op values to allow specifying category
  filter using either a single plain string or a NULL terminated array
  of plain strings.
* Create ACO_PREFIX to allow matching option names to case insensitive
  prefixes.

Change-Id: I66a920dcd8e2b0301f73f968016440a985e72821

This is needed for future changes which will require being able to
process the load priority out of order.

Change-Id: Ia23421197f09789940510b03ebbbf3bf24d51bea

We should not do flood detection on video RTP streams.  Video RTP streams
are very bursty by nature.  They send out a burst of packets to update the
video frame then wait for the next video frame update.  Really only audio
streams can be checked for flooding.  The others are either bursty or
don't have a set rate.

* Added code to selectively disable packet flood detection for video RTP
streams.

ASTERISK-27440

Change-Id: I78031491a6e75c2d4b1e9c2462dc498fe9880a70

This patch does three things associated with the initial incoming INVITE
request URI.

1) Add access to the full initial incoming INVITE request URI.

2) We were not setting DNID on incoming PJSIP channels.  The DNID is the
user portion of the initial incoming INVITE Request-URI.  The value is
accessed by reading CALLERID(dnid).

3) Fix CHANNEL(pjsip,target_uri) documentation.

* The initial incoming INVITE request URI is now available using
CHANNEL(pjsip,request_uri).

* Set the DNID on PJSIP channel creation so CALLERID(dnid) can return the
initial incoming INVITE request URI user portion.

* CHANNEL(pjsip,target_uri) now correctly documents that the target URI is
the contact URI.

* Refactored print_escaped_uri() out of channel_read_pjsip() to handle
pjsip_uri_print() error condition when the buffer is too small.

ASTERISK-27478

Change-Id: I512e60d1f162395c946451becb37af3333337b33

A couple of places were setting the status to "UNKNOWN" when qualifies were
being disabled. Instead this should be set to the "CREATED" status that
represents when a contact is given (uri available), but the qualify frequency
is set to zero so we don't know the status.

This patch updates the relevant places with "CREATED". It also updates the
"CREATED" status description (value shown in CLI/AMI/ARI output) to a value
of "NonQualified"/"NonQual" as this description is hopefully less confusing.

ASTERISK-27467

Change-Id: Id67509d25df92a72eb3683720ad2a95a27b50c89

Using the LIKE operator requires a full table scan of 'astdb', whereas a
comparison operation is able to use the primary key index.

This patch adds a new function to the AstDB API for quick prefix matches
and updates res_sorcery_astdb to utilize it. This showed substantial
performance improvement in my test environment.

Related to ASTERISK~26806, but does not completely resolve it.

Change-Id: I7d37f9ba2aea139dabf2ca72d31fbe34bd9b2fa1

There are many places in the code base where we ignore the return value
of fcntl() when getting/setting file descriptior flags. This patch
introduces a convenience function that allows setting or clearing file
descriptor flags and will also log an error on failure for later
analysis.

Change-Id: I8b81901e1b1bd537ca632567cdb408931c6eded7

The SuccessfulAuth using_password field was declared as a pointer to a
uint32_t when the field was later read as a uint32_t value.  This resulted
in unnecessary casts and a non-portable field value reinterpret in
main/security_events.c:add_json_object().  i.e., It would work on a 32 bit
architecture but not on a 64 bit big endian architecture.

Change-Id: Ia08bc797613a62f07e5473425f9ccd8d77c80935

Previous commits maintained compatibility with older remote console
clients as well as maintaining all API's.

Remove the following compatibility code:
* ast_cli_generatornummatches.
* Remote command "_command nummatches".
* Sorting / duplicate removal by remote console.

Change-Id: I59e6ce94fa57ae564888442049695f7e46746437

Some completion generators are very inefficent due to the way CLI
requests matches one at a time.  ast_cli_completion_add can be called
multiple times during one invokation of a CLI generator to add all
results without having to reinitialize the search state for each match.

Change-Id: I73d26d270bbbe1e3e6390799cfc1b639e39cceec

The ability to add to localized storage cannot be supported by
ast_cli_generator.  The only calls to ast_cli_generator should be by
functions that need to proxy the CLI generator, for example 'cli check
permissions' or 'core show help'.

* ast_cli_generatornummatches now retrieves the vector of matches and
  reports the number of elements (not including 'best' match).
* test_substitution retrieves and iterates the vector.

Change-Id: I8cd6b93905363cf7a33a2d2b0e2a8f8446d9f248

ASTERISK-27435

Change-Id: Id318a7ae6d7d69b53f911d30bf3eece64852f15c

This adds the printf attribute and changes 'fmt' from 'const void *' to
'const char *'.  This resolves a warning from some compiler for
vsnprintf needing a literal string for format.

Change-Id: I71c33a8262590042ee451e1146760c10bb22fb78

We should be sending people to secure web URL's where available.
Update README's and docs.

Change-Id: Id5b1e049b0b18b49a784f1254605aefa244ce19a

Remove doxygen contents that have nothing to do with the current state
of Asterisk.

Change-Id: Ic072cc8641f9533a202990ccf275ce87e3efd95c

Previously for PJSIP the local address of WebSocket connections
was set to the remote address. For logging purposes this is
not particularly useful.

The WebSocket API has been extended to allow the local
address to be queried and this is used in PJSIP to set the
local address to the correct value.

The PJSIP HEP support has also been tweaked so that reliable
transports always use the local address on the transport
and do not try to (wrongly) guess. As they are connection
based it is impossible for the source to be anything else.

ASTERISK-26758
ASTERISK-27363

Change-Id: Icd305fd038ad755e2682ab2786e381f6bf29e8ca

Change-Id: I4ea49c441890a81384144479dc93ab5a3989486d

Some consumers of the sorcery API use ast_sorcery_retrieve_by_regex
only so that they can anchor the potential match as a prefix and not
because they truly need regular expressions.

Rather than using regular expressions for simple prefix lookups, add
a new operation - ast_sorcery_retrieve_by_prefix - that does them.

Change-Id: I56f4e20ba1154bd52281f995c27a429a854f6a79

This is a rewrite of ast_cli_completion_matches using a vector to build
the list.  The original function calls the vector version, NULL
terminates the vector and extracts the elements array.

One change in behavior the results are now sorted and deduplicated. This
will solve bugs where some duplicate checking was done before the list
was sorted.

Change-Id: Iede20c5b4d965fa5ec71fda136ce9425eeb69519

* AST_VECTOR_STEAL_ELEMENTS - steal the array of elements for use
  with non-vector code.
* struct ast_vector_string - a vector of 'char *'.

Change-Id: I104d1b204be03fccf67e02a195596adcb5ab1e42

The media frame cache gets in the way of finding use after free errors of
media frames.  Tools like valgrind and MALLOC_DEBUG don't know when a
frame is released because it gets put into the cache instead of being
freed.

* Added the "cache_media_frames" option to asterisk.conf.  Disabling the
option helps track down media frame mismanagement when using valgrind or
MALLOC_DEBUG.  The cache gets in the way of determining if the frame is
used after free and who freed it.  NOTE: This option has no effect when
Asterisk is compiled with the LOW_MEMORY compile time option enabled
because the cache code does not exist.

To disable the media frame cache simply disable the cache_media_frames
option in asterisk.conf and restart Asterisk.

Sample asterisk.conf setting:
[options]
cache_media_frames=no

ASTERISK-27413

Change-Id: I0ab2ce0f4547cccf2eb214901835c2d951b78c00

This change causes the configure script to fail if the C compiler does
not support both function attributes constructor and destructor.  These
were already required as modules cannot function without these attributes
and Asterisk requires modules.

This also has AST_GCC_ATTRIBUTE set a variable
ax_cv_have_func_attribute_$1.  This is the same variable name used by
autoconf-archive's AX_GCC_FUNC_ATTRIBUTE, used for the same purpose.

Change-Id: Id68e8a1447f2a6d707c54b56350e7bfdb33fb663

This adds FD tracking for the following functions:
* eventfd
* timerfd_create
* socketpair
* accept

ASTERISK-27404

Change-Id: Id6848fe904ade2d34eb39d2a20bd6b223e1111fc

When (v)asprintf() fails, the state of the allocated buffer is undefined.
The library had better not leave an allocated buffer as a result or no one
will know to free it.  The most likely way it can return failure is for an
allocation failure.  If the printf conversion fails then you actually have
a threading problem which is much worse because another thread modified
the parameter values.

* Made __ast_asprintf()/__ast_vasprintf() set the returned buffer to NULL
on failure.  That is much more useful than either an uninitialized pointer
or a pointer that has already been freed.  Many uses won't have to check
for failure to ensure that the buffer won't be double freed or prevent an
attempt to free an uninitialized pointer.

* stasis.c: Fixed memory leak in multi_object_blob_to_ami() allocated by
ast_asprintf().

* ari/resource_bridges.c:ari_bridges_play_helper(): Remove assignment to
the wrong thing which is now not needed even if assigning to the right
thing.

Change-Id: Ib5252fb8850ecf0f78ed0ee2ca0796bda7e91c23

This mimics the behavior of Chrome and Firefox and creates an ephemeral
X.509 certificate for each DTLS session.

Currently, the only supported key type is ECDSA because of its faster
generation time, but other key types can be added in the future as
necessary.

ASTERISK-27395

Change-Id: I5122e5f4b83c6320cc17407a187fcf491daf30b4

This check is being added to make it easier for end-users of third party
open source Opus modules.  This was removed by ASTERISK-26426 but only
the module needed to be removed.

Change-Id: I62b9cd0c4fa8a77596ab0e042948a643a1152677

Replace 'needsreload' argument with a 'type' argument to specify which
type of modules you want completion.  This provides more accurate CLI
completion for load and unload commands.

* 'module unload' now excludes modules that have active references or are
  not running.
* 'module load' now excludes modules that are already running.
* 'core set debug [atleast] <level> [module]' shows running modules only.

ASTERISK-27378

Change-Id: Iea3e00054461484196c46f688f02635cc886bad1

In WebRTC streams (or media tracks in their world) can be grouped
together using the mslabel. This informs the browser that each
should be synchronized with each other.

This change extends the stream API so this information can
be stored with streams. The PJSIP support has been extended
to use the mslabel to determine grouped streams and store
this association on the streams. Finally when creating the
SDP the group information is used to cause each media stream
to use the same mslabel.

ASTERISK-27379

Change-Id: Id6299aa031efe46254edbdc7973c534d54d641ad

When the identify_by option on an endpoint is set to ip it will
only be identified using the res_pjsip_endpoint_identifier_ip module.
This ensures that it is not mistakenly matched using the username of
the From header. To ensure behavior has not changed the default has
been changed to "username,ip" for the identify_by option.

ASTERISK-27206

Change-Id: I2170b86a7f7e221b4f00bf14aa1ef1ac5b050bbd

The configure option to disable XML documentation does not currently
work.  This patch makes it effective, but also causes an ABI change by
removing the ast_xmldoc_* symbols.  Disabling xmldoc also prevents docs
from being automatically generated, but they can still be manually
generated with 'make doc/core-en_US.xml'.

ASTERISK-26639

Change-Id: Ifac562340c09f80c83e0203de098fcac93bf8c44

This makes the 'bt' parameter unconditional for ast_store_lock_info and
ast_remove_lock_info.  The 'bt' parameter is unused when HAVE_BKTR is
undefined.

Change-Id: Ieced0e920928b735a39c3b5952b806c473d67453

Beanstalkd is a simple to use job queue. It provides a means to
create multiple job queues called "tubes". Each tube can store
multiple jobs, with varying priorities with the queue. Queue
processing is available via a simple TCP socket or via well defined
libraries, avaialble at
https://github.com/kr/beanstalkd/wiki/client-libraries

This module is based upon the beanstalk-client library, available
for download at: https://github.com/deepfryed/beanstalk-client

Change-Id: I5fe4089a34ab3b39230786d9bbfddafa56715f48

Add action to cancel feature attended transfer with AMI interface

ASTERISK-27215 #close

Change-Id: Iab8a81362b5a1757e2608f70b014ef863200cb42

Add bridge_features structure to bridge creation.  Specifically, this
implements mute and DTMF suppression, but others should be able to be
easily added to the same structure.

ASTERISK-27322 #close
Reported by: Darren Sessions
Sponsored by: AVOXI

Change-Id: Id4002adfb65c9a8027ee9e1a5f477e0f01cf9d61

* Store weak proxy objects in instances container.
* Remove special unreference function and replace with macro that calls
ao2_cleanup.
* Add REF_DEBUG information to ast_sorcery_open.

Change-Id: I5a150a4e13cee319d46b5a4654f95a4623a978f8

This function finds a weak proxy in an ao2_container and returns the
real object associated with it.

Change-Id: I9da822049747275f5961b5c0a7f14e87157d65d8

Copy the list of weakproxy callbacks to temporary memory so they can be
run without holding the weakproxy lock.

Change-Id: Ib167622a8a0f873fd73938f7611b2a5914308047

* Also some misc formatting in cdr.c.

Change-Id: Ied89a28802a662c37c43326a1aafdce596e0df4a

When "rewrite_contact" is enabled, the "max_contacts" count option can
block re-registrations because the source port from the endpoint can be
random.  When the re-registration is blocked, the endpoint may give up
re-registering and require manual intervention.

* The "remove_existing" option now allows a registration to succeed by
displacing any existing contacts that now exceed the "max_contacts" count.
Any removed contacts are the next to expire.  The behaviour change is
beneficial when "rewrite_contact" is enabled and "max_contacts" is greater
than one.  The removed contact is likely the old contact created by
"rewrite_contact" that the device is refreshing.

ASTERISK-27192

Change-Id: I64c107a10b70db1697d17136051ae6bf22b5314b