The Python/C API is used only if the Test Framework was enabled in Asterisk
'make menuselect'. The Test Framework is available only if the Developer Mode
was enabled in Asterisk './configure --enable-dev-mode'. And that Python/C API
is used only if the PJProject was found and not disabled in Asterisk; the user
did not go for './configure --without-pjproject'.

Furthermore, because version 2 of that Python/C API is required (currently) and
because some platforms do not offer a generic version 2, the script searches
for 2.7 explicitly as well.

To avoid version mismatch between the Python/C API and the Python environment,
the script searches for the latter in the same versions, in the same the order
as well. Because this Python/C API is just for (some) Asterisk contributors,
the script also goes for the Python 3 environment as a last resort for all
other Asterisk users. This allows 'make full' even on minimal installations of
Ubuntu 18.04 LTS and newer.

Because the Python/C API is Asterisk contributor specific, the Python packages
are removed from the script './contrib/scripts/install_prereq' as this script
is intended for Asterisk users. Asterisk contributors have to install much more
packages in any case, like:
sudo apt install autoconf automake git git-review python2.7-dev

ASTERISK-28824
ASTERISK-27717

Change-Id: Id46d357e18869f64dcc217b8fdba821b63eeb876

It is possible to configure a TCP/TLS client without having a TCP/TLS
server. In that case, no error or warning was printed but the headers
Contact and Via in SIP REGISTER were "(null)".

ASTERISK-28798

Change-Id: I387ca5cb6a65f1eb675a29c5e41df8ec6c242ab2

Change-Id: Iebf7687613aa0295ea3c82256460b337f1595be2

Change-Id: Ifc5059cd867e77b9c92ed9f4b895a9a91200d3ec

If chan_pjsip is configured for DTMF_RFC_4733, and the core triggers a
digit begin before media, or rtp has been setup then it's possible the
outgoing channel will hear a constant DTMF tone upon answering.

This happens because when there is no media, or rtp chan_pjsip notifies
the core to initiate inband DTMF. However, upon digit end if media, and
rtp become available then chan_pjsip does not notify the core to stop
inband DTMF. Thus the tone continues playing.

This patch makes it so chan_pjsip only notifies the core to start
inband DTMF in only the required cases. Now if there is no media, or
rtp availabe upon digit begin chan_pjsip does nothing, but tells the
core it handled it.

ASTERISK-28817 #close

Change-Id: I0dbea9fff444a2595fb18c64b89653e90d2f6eb5

ASTERISK-28819

Change-Id: Iba7ee7bc7936d7a156171c8fc0f1670e864e7600

Furthermore, the nowhere used compress is removed.

ASTERISK-28816

Change-Id: I77daab80cfabb56d51c3ea6b1d14bd9b9fbc577c

ASTERISK-28818

Change-Id: Ib7f246896457d9e3b14d7f5199136d6545ce0b6f

ASTERISK-28809

Change-Id: I269731715347c8e5ef7db1b6ffd3f8d15fc04be4

The following fields return an error when read from dialplan:

- exten
- context
- userfield
- channame

ASTERISK-28796 #close

Change-Id: Ieacaac629490f8710fdacc9de80ed5916c5f6ee2

ASTERISK-28803

Change-Id: I15449621b68d0ad4d57b7c337c1167adb15135af

ASTERISK-28808

Change-Id: I5e76831373532d7b8065d024e66cd1fb75dedd80

This reverts commit a3a2fbae.

Reason for revert: There is a lot of code that relies on the broken
behavior that this fixes.

Change-Id: I410c395a0168acbdaf89e616e3cb5e1312d190cb

My tester missed this one previously, have confirmed a positive build
this time round.

Change-Id: Id06853375954a200f03f9a1b9c97fe0b10d31fbf

When an AOR is modified endpoints are updated that reference
the AOR so they can start receiving updates and reflect the
correct state. If this is the case then we shouldn't change
the endpoint to be offline if it does not reference the AOR
but instead only when the endpoint is completely updated for
all its AORs.

ASTERISK-28056
patches:
  pjsip_options-aor.diff submitted by jhord (license 6978)

Change-Id: I3ee00023be2393113cd4e056599f23f3499ef164

This unit test runs through combinations of...
	* Local codecs
	* Remote Codecs
	* Codec Preference
	* Incoming/Outgoing

A few new APIs were created to make it easier to test
the functionality but didn't result in any actual
functional change.

ASTERISK_28777

Change-Id: Ic8957c43e7ceeab0e9272af60ea53f056164f164

Based on this new endpoint setting, a joint list of preferred codecs
between those received from the Asterisk core (remote), and those
specified in the endpoint's "allow" parameter (local) is created and
is used to create the outgoing SDP offer.

* Add outgoing_call_offer_pref to pjsip_configuration (endpoint)

* Add "call_direction" to res_pjsip_session.

* Update pjsip_session_caps.c to make the functions more generic
  so they could be used for both incoming and outgoing.

* Update ast_sip_session_create_outgoing to create the
  pending_media_state->topology with the results of
  ast_sip_session_create_joint_call_stream().

* The endpoint "preferred_codec_only" option now automatically sets
  AST_SIP_CALL_CODEC_PREF_FIRST in incoming_call_offer_pref.

* A helper function ast_stream_get_format_count() was added to
  streams to return the current count of formats.

ASTERISK-28777

Change-Id: Id4ec0b4a906c2ae5885bf947f101c59059935437

This change provides functions that take in a JSON payload, verify that
the contents contain all the mandatory fields and required values (if
any), and signs the payload with the private key. Four fields are added
to the payload: x5u, attest, iat, and origid. As of now, these are just
placeholder values that will be set to actual values once the logic is
implemented for what to do when an actual payload is received, but the
functions to add these values have all been implemented and are ready to
use. Upon successful signing and the addition of those four values, a
ast_stir_shaken_payload is returned, containing other useful information
such as the algorithm and signature.

Change-Id: I74fa41c0640ab2a64a1a80110155bd7062f13393

If a frame handling routine returns a list of frames (vs. a single frame)
those frames are never passed to a tech's write_stream handler even if one is
available. For instance, if a codec translation occurred and that codec
returned multiple frames then those particular frames were always only sent
to the tech's "write" handler. If that tech (pjsip for example) was stream
capable then those frames were essentially ignored. Thus resulting in bad
audio.

This patch makes it so the "write_stream" handler is appropriately called
for all cases, and for all frames if available.

ASTERISK-28795 #close

Change-Id: I868faea0b73a07ed5a32c2b05bb9cf4b586f739d

In case of no OpenSSL headers, the module was built but did not load.

ASTERISK-28789

Change-Id: Ie007e84296bcf2bd4237f19d68ba5f932b84cd02

In case of no OpenSSL headers, the module func_aes was built but did not load.

ASTERISK-28788

Change-Id: I0b99b8468cbeb3b0eab23069cbd64062ef885ffc

The dial application had 80 characters of destination length
limitation. But this limitation causes unexpected dial string
cut if the dial string is long.

Removed unnecessary limited buffer to support longer dial
destination.

ASTERISK-27946

Change-Id: I72c8f0319a4b47e8180817a66a7e9bde063cb330

RFC5621 requires any content type with a Content-Disposition
with handling=required to be rejected with a 415 response

ASTERISK-28782 #close

Change-Id: Iad969df75936730254b95c1a8bc3b48497070bb4

named_acl.c (which is really a named_ha) now uses ast_ha_output.

I've also updated main/manager.c to output the actual ACL on "manager
show user <username>" if one is set.  If this works then we can add
similar to other modules as required.

Change-Id: I0ec9876a90dddd379c80ec078d48e3ee6991eb0f

Change-Id: I0910c79196f2b7c7e5ad6f1db95e83800ac737a2

Change-Id: I168e2d3a65d444fb0961bd228257441fe718f6a7
(cherry picked from commit c9cd6812)

When an outgoing channel is created a list of formats may
optionally be provided which is used as a request that the
formats be used if possible. If an endpoint is not configured
for any of the formats we ignore this request and use what is
configured. This has the side effect of also including other
stream types (such as video) that were not present in the
requested formats.

This change makes it so that the intention of the request is
preserved - that is if only an audio format is requested then
even if there is no joint audio format between the request and
the configuration we will still only place an audio stream in
the outgoing call.

ASTERISK-28787

Change-Id: Ia54c0c63e94aca176169b9bae4bb8a8380ea245f

ASTERISK-28790

Change-Id: I10df52f98b19ed62575f25dab36e82d136dccd99

This patch makes it so ast_coredumper now outputs the following information to
a *-info.txt file when processing a core file:

  asterisk version and "built by" string
  BUILD_OPTS
  system start, and last reloaded date/time
  taskprocessor list
  equivalent of "bridge show all"
  equivalent of "core show channels verbose"

Also a slight modification was made when trying to obtain the pid(s) of a
running Asterisk. If it fails to retrieve any it now reports an error.

Change-Id: I54f35c19ab69b8f8dc78cc933c3fb7c99cef346b

This fixes ast_addressfamily_to_sockaddrsize to reference the
provided argument, and ast_sockaddr_from_sockaddr to not use the name of
a structure as argument.

Change-Id: Ibf5db469c47c3b4214edf8456326086174e8edd7

This commit sets up some of the initial framework for the module and
adds a way to read the private key from the specified file, which will
then be appended to the certificate object. This works fine for now, but
eventually some other structure will likely need to be used to store all
this information. Similarly, the caller_id_number is specified on the
certificate config object, but in the end we will want that information
to be tied to the certificate itself and read it from there.

A method has been added that will retrieve the private key associated
with the caller_id_number passed in. Tab completion for certificates and
stores has also been added.

Change-Id: Ic4bc1416fab5d6afe15a8e2d32f7ddd4e023295f

Users of this should set plugin dahdi.so in their options file.

ASTERISK-16676

Change-Id: I6d01ad0a10e9fea477876d0941c3f38aac357e91

If a negative (error) return is received from dundi_lookup_internal,
this is not handled correctly when assigning the result to the buffer.
As such, use a signed integer in the assignment and do a proper
comparison.

ASTERISK-21205

Change-Id: I5214ebb6491e2bd14f90c7d3ce229da86888f739

When examining a stream to determine hold/unhold information we
only care about the default audio stream. Other streams aren't
used for hold/unhold.

ASTERISK-28784

Change-Id: I7a1f10f07822c4aee1f98a38b9628849b578afe4

When the Asterisk receives 200 OK with invalid SDP,
the Asterisk/PJPROJECT terminating the session.
But if the channel was in the Bridge, Asterisk tries send
the Re-Invite before terminating the session.
And when the Asterisk sending the Re-Invite, it doesn't check
the SDP is NULL or not. This crashes the Asterisk.

Fixed it to close the session correctly if the UAS sends the
200 OK with wrong SDP.

ASTERISK-28743

Change-Id: Ifa864e0e125b1a7ed2f3abd4164187e1dddc56da

This patch has been included in Gentoo distribution for at least since
asterisk 1.8, but there are references in the logs going back as far as
1.0.0 - not sure if this is still required in any way, it does apply,
and it doesn't (as far as we can determine) cause build failures.

Change-Id: I46d8845e30200205e80580680bf060aa3012ba54

We (Gentoo distribution) reckon that in the case of multiple versions of
gmime installed we should prefer the newest one.

Change-Id: Idf7be613230232eb1d573d93c4a5a8297f4ecd2d

The state of the default audio stream is used for hold/unhold so we
restrict it to sendrecv as the core does not handle when it changes as
a result of hold/unhold.

This restriction does not apply to other media types though so we now
only restrict it to audio. This allows the other default streams to
store their state at all values, and not just sendrecv and removed.

ASTERISK-28783

Change-Id: I139740f38cea7f7d92a876ec2631ef50681f6625

Do not hang up a PJSIP channel on RTP timeout if that channel is in
a direct-media bridge. Also reset the time of the last received RTP packet when
direct-media ends (wait full rtp_timeout period before checking first time after
audio came back to Asterisk).

ASTERISK-28774
Reported-by: Michael Neuhauser

Change-Id: I8b62012be7685849e8fb2b1c5dd39d35313ca2d1

A pure blacklist is not good enough, we need a whitelist mechanism as
well, and the simplest way to do that is to re-use existing ACL
infrastructure.

This makes it simpler to blacklist say an entire block (/24) except a
smaller block (eg, a /29 or even a /32).  Normally you'd need to
recursively split the block, so if you want to blacklist a /24 except
for a /29 you'd end up with a blacklit for a /25, /26, /27 and /28.  I
feel that having an ACL instead of a blacklist only is clearer.

Change-Id: Id57a8df51fcfd3bd85ea67c489c85c6c3ecd7b30
Signed-off-by: Jaco Kroon <jaco@uls.co.za>